Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Before Use
- Preparations
- Connecting speakers
- Connecting a TV
- Connecting playback devices
- Connecting the FM/AM antennas
- Preparing for connecting to a network
- Connecting other devices
- Plugging in the power cable
- Selecting the on-screen menu language
- Configuring the necessary speaker settings
- Setting MusicCast
- Enjoying Sound
- Enjoying sound field effects
- Select your favorite sound mode
- Enjoying 3D sound fields (CINEMA DSP 3D)
- Enjoying sound field effects optimized for the type of content
- Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)
- Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)
- Enjoying surround sound with headphones (SILENT CINEMA)
- Enjoying unprocessed playback
- Enjoying enhanced bass sound
- Enjoying enhanced compressed music
- Enjoying Dolby Atmos and DTS:X
- Enjoying music in multiple rooms
- Enjoying sound field effects
- Playback
- Basic playback procedure
- Listening to FM/AM radio
- Setting the frequency steps
- Selecting a frequency for reception
- Selecting a preset station
- Registering FM radio stations automatically (FM Auto Preset)
- Registering a radio station manually
- Clearing preset stations
- Clearing all preset stations
- Displaying the Radio Data System information
- Receiving traffic information automatically
- Playing back music stored on a Bluetooth® device
- Playing back music with AirPlay
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Listening to music streaming services
- Useful playback functions
- Configuring playback settings for different playback sources (Option menu)
- Basic operation of the Option menu
- Option menu items
- Adjusting the tone of the audio output
- Configuring the volume automatically based on the YPAO measurement results
- Adjusting the volume or perceive height of dialogue sounds
- Adjusting the delay of the Lipsync function
- Setting Compressed Music Enhancer
- Correcting volume differences during playback
- Setting the use of Extra Bass
- Enabling the video signal processing
- Selecting a video source to be output with the selected audio source
- Configuring the shuffle/repeat setting
- Switching between stereo and monaural for FM radio reception
- Setting presets for radio stations
- Adding an Internet radio station to the “Favorites” folder
- Removing an Internet radio station from the “Favorites” folder
- Receiving traffic information automatically
- Checking the current status information
- Configurations
- Configuring various functions (Setup menu)
- Configuring the speaker settings
- Setting your speaker system
- Setting the size of the front speakers
- Setting the use of a center speaker and its size
- Setting the use of surround speakers and their size
- Setting the layout of the surround speakers
- Setting the use of surround back speakers and their size
- Setting the use of presence speakers and their size
- Setting the layout of the presence speakers
- Setting the crossover frequency of the low-frequency components
- Setting the use of a subwoofer
- Setting the phase of the subwoofer
- Setting the distance between each speaker and the listening position
- Adjusting the volume of each speaker
- Setting the equalizer
- Outputting test tones
- Reloading the previous YPAO adjustments
- Configuring the sound settings
- Checking the current audio signal information
- Enabling Lipsync adjustment
- Setting the adjustment method of the Lipsync function
- Adjusting the delay of the Lipsync function
- Selecting sound programs
- Adjusting the sound field effect level
- Adjusting the delay between the direct sound and presence sound field generation
- Adjusting the broadening effect of the presence sound field
- Adjusting the loss of the presence sound field
- Adjusting the decay time of the rear reverberant sound
- Adjusting the delay between the direct sound and reverberant sound generation
- Adjusting the volume of the reverberant sound
- Adjusting the delay between the direct sound and surround sound field generation
- Adjusting the broadening effect of the surround sound field
- Adjusting the loss of the surround sound field
- Adjusting the delay between the direct sound and surround back sound field generation
- Adjusting the broadening effect of the surround back sound field
- Adjusting the loss of the surround back sound field
- Selecting the surround decoder used in the program
- Setting the use of Center Spread
- Adjusting the center localization (broadening effect) of the front sound field
- Adjusting the entire volume for “7ch Stereo”
- Adjusting the front and rear volume balance for “7ch Stereo”
- Adjusting the left and right volume balance for “7ch Stereo”
- Adjusting the height volume balance using the presence speakers for “7ch Stereo”
- Setting the use of Monaural Mix for “7ch Stereo”
- Setting the dynamic range adjustment method
- Setting the limit value of the volume
- Setting the initial volume for when the unit is turned on
- Adjusting the CINEMA DSP 3D effect level automatically
- Setting Virtual Surround Back Speaker (VSBS)
- Configuring the scene settings
- Configuring the video/HDMI settings
- Checking the current video and HDMI signal information
- Setting the use of the video signal processing
- Setting a resolution to output HDMI video signals
- Setting an aspect ratio to output HDMI video signals
- Setting the use of HDMI Control
- Setting the audio jack used for TV audio input
- Setting the use of ARC
- Linking the standby modes of the unit and the TV
- Setting the output of HDMI audio from the TV speaker
- Setting the version of HDCP used on the HDMI input jacks
- Setting the use of HDMI Standby Through
- Configuring the network settings
- Checking the network information on the unit
- Setting the network connection method (Wired/Wireless)
- Setting the network parameters automatically (DHCP)
- Setting the network parameters manually
- Setting the use of the Network Standby function
- Setting the MAC address filter
- Setting the MAC address
- Setting the use of a Digital Media Controller
- Setting the use of volume control via AirPlay
- Setting the network name of the unit
- Setting the power interlock from the unit to MusicCast compatible devices
- Configuring the Bluetooth settings
- Configuring the multi zone settings
- Checking the Zone2 information
- Setting the use of volume adjustments for Zone2 output
- Setting the Zone2 limit value of the volume
- Setting the Zone2 initial volume for when the unit is turned on
- Adjusting the time deviation in relation to the main zone
- Switching between stereo and monaural for Zone2 output
- Setting the use of Compressed Music Enhancer for Zone2 output
- Adjusting the tone for Zone2 output
- Setting the use of Extra Bass for Zone2 output
- Adjusting the volume balance for Zone2 output
- Renaming the zone name
- Setting the use of switching to the party mode on Zone2
- Configuring the system settings
- Checking the system information on the unit
- Setting the on-screen menu language
- Combining audio of another input source with video of the current input source
- Setting input sources to be skipped when operating the INPUT key
- Automatically changing the input source names displayed on the front display
- Manually changing the input source names displayed on the front display
- Setting the use of Auto Play function
- Setting sound programs to skip when operating the PROGRAM key
- Setting the function for the PROGRAM key on the remote control
- Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control
- Adjusting the brightness of the front display
- Setting the scale of the volume display
- Setting the use of short messages on the TV
- Setting the image to be used as wallpaper on the TV
- Specifying the condition for the TRIGGER OUT jack to function
- Specifying the output level of the electronic signal transmitted with each input
- Switching the output level for electronic signal transmission manually
- Specifying the zone with which the TRIGGER OUT jack functions are synchronized
- Setting the amount of time for the auto-standby function
- Setting the use of the eco mode
- Preventing accidental changes to the settings
- Updating the firmware via the network
- Configuring the advanced settings (ADVANCED SETUP menu)
- Basic operation of the ADVANCED SETUP menu
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SP IMP.)
- Selecting the remote control ID (REMOTE ID)
- Changing the FM/AM tuning frequency setting (TU)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MON.CHK)
- Selecting the HDMI 4K signal format (4K MODE)
- Setting DTS Format Notification (DTS MODE)
- Backuping and restoring all the settings (BKUP/RSTR)
- Restoring the default settings (INIT)
- Updating the firmware (UPDATE)
- Checking the firmware version (VERSION)
- Updating the Firmware
- Connecting to a Network Wirelessly
- Input/Output Jacks and Cables
- Using Presence Speakers
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Additional Information on HDMI
- Default Settings
- Troubleshooting
- Error Indications
- Specs
- Quick Start Guide
- Bluetooth® Transmission Setup with AV Receivers
- Updating the Firmware
- Warranty
Changing the speaker impedance setting (SP IMP.)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIR TUAL
SP IMP.••8¬MIN
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
ADVANCED SETUP menu
“SP IMP.”
Settings
6 Ω MIN Select this option when you connect 6-ohm speakers to the unit.
8 Ω MIN Select this option when you connect 8-ohm or higher speakers to the unit.
Selecting the remote control ID (REMOTE ID)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIR TUAL
REMOTE ID••ID1
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with
a unique remote control ID for its corresponding receiver.
ADVANCED SETUP menu
“REMOTE ID”
Settings
ID1, ID2
Changing the remote control ID of the remote control
• To select ID1, while holding down the left cursor key, hold down SCENE (1) for 5
seconds.
• To select ID2, while holding down the left cursor key, hold down SCENE (2) for 5
seconds.
Changing the FM/AM tuning frequency setting (TU)
(Asia and General models only)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIR TUAL
TU••••FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
ADVANCED SETUP menu
“TU”
Settings
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz steps
and AM by 10-kHz steps.
FM50/AM9
Select this when you want to adjust the FM frequency by 50-kHz steps
and AM by 9-kHz steps.
Switching the video signal type (TV FORMAT)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIR TUAL
TV FORMAT•NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
ADVANCED SETUP menu
“TV FORMAT”
Settings
NTSC, PAL
En
135