Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Before Use
- Preparations
- Connecting speakers
- Connecting a TV
- Connecting playback devices
- Connecting the FM/AM antennas
- Preparing for connecting to a network
- Connecting other devices
- Plugging in the power cable
- Selecting the on-screen menu language
- Configuring the necessary speaker settings
- Setting MusicCast
- Enjoying Sound
- Enjoying sound field effects
- Select your favorite sound mode
- Enjoying 3D sound fields (CINEMA DSP 3D)
- Enjoying sound field effects optimized for the type of content
- Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)
- Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)
- Enjoying surround sound with headphones (SILENT CINEMA)
- Enjoying unprocessed playback
- Enjoying enhanced bass sound
- Enjoying enhanced compressed music
- Enjoying Dolby Atmos and DTS:X
- Enjoying music in multiple rooms
- Enjoying sound field effects
- Playback
- Basic playback procedure
- Listening to FM/AM radio
- Setting the frequency steps
- Selecting a frequency for reception
- Selecting a preset station
- Registering FM radio stations automatically (FM Auto Preset)
- Registering a radio station manually
- Clearing preset stations
- Clearing all preset stations
- Displaying the Radio Data System information
- Receiving traffic information automatically
- Playing back music stored on a Bluetooth® device
- Playing back music with AirPlay
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Listening to music streaming services
- Useful playback functions
- Configuring playback settings for different playback sources (Option menu)
- Basic operation of the Option menu
- Option menu items
- Adjusting the tone of the audio output
- Configuring the volume automatically based on the YPAO measurement results
- Adjusting the volume or perceive height of dialogue sounds
- Adjusting the delay of the Lipsync function
- Setting Compressed Music Enhancer
- Correcting volume differences during playback
- Setting the use of Extra Bass
- Enabling the video signal processing
- Selecting a video source to be output with the selected audio source
- Configuring the shuffle/repeat setting
- Switching between stereo and monaural for FM radio reception
- Setting presets for radio stations
- Adding an Internet radio station to the “Favorites” folder
- Removing an Internet radio station from the “Favorites” folder
- Receiving traffic information automatically
- Checking the current status information
- Configurations
- Configuring various functions (Setup menu)
- Configuring the speaker settings
- Setting your speaker system
- Setting the size of the front speakers
- Setting the use of a center speaker and its size
- Setting the use of surround speakers and their size
- Setting the layout of the surround speakers
- Setting the use of surround back speakers and their size
- Setting the use of presence speakers and their size
- Setting the layout of the presence speakers
- Setting the crossover frequency of the low-frequency components
- Setting the use of a subwoofer
- Setting the phase of the subwoofer
- Setting the distance between each speaker and the listening position
- Adjusting the volume of each speaker
- Setting the equalizer
- Outputting test tones
- Reloading the previous YPAO adjustments
- Configuring the sound settings
- Checking the current audio signal information
- Enabling Lipsync adjustment
- Setting the adjustment method of the Lipsync function
- Adjusting the delay of the Lipsync function
- Selecting sound programs
- Adjusting the sound field effect level
- Adjusting the delay between the direct sound and presence sound field generation
- Adjusting the broadening effect of the presence sound field
- Adjusting the loss of the presence sound field
- Adjusting the decay time of the rear reverberant sound
- Adjusting the delay between the direct sound and reverberant sound generation
- Adjusting the volume of the reverberant sound
- Adjusting the delay between the direct sound and surround sound field generation
- Adjusting the broadening effect of the surround sound field
- Adjusting the loss of the surround sound field
- Adjusting the delay between the direct sound and surround back sound field generation
- Adjusting the broadening effect of the surround back sound field
- Adjusting the loss of the surround back sound field
- Selecting the surround decoder used in the program
- Setting the use of Center Spread
- Adjusting the center localization (broadening effect) of the front sound field
- Adjusting the entire volume for “7ch Stereo”
- Adjusting the front and rear volume balance for “7ch Stereo”
- Adjusting the left and right volume balance for “7ch Stereo”
- Adjusting the height volume balance using the presence speakers for “7ch Stereo”
- Setting the use of Monaural Mix for “7ch Stereo”
- Setting the dynamic range adjustment method
- Setting the limit value of the volume
- Setting the initial volume for when the unit is turned on
- Adjusting the CINEMA DSP 3D effect level automatically
- Setting Virtual Surround Back Speaker (VSBS)
- Configuring the scene settings
- Configuring the video/HDMI settings
- Checking the current video and HDMI signal information
- Setting the use of the video signal processing
- Setting a resolution to output HDMI video signals
- Setting an aspect ratio to output HDMI video signals
- Setting the use of HDMI Control
- Setting the audio jack used for TV audio input
- Setting the use of ARC
- Linking the standby modes of the unit and the TV
- Setting the output of HDMI audio from the TV speaker
- Setting the version of HDCP used on the HDMI input jacks
- Setting the use of HDMI Standby Through
- Configuring the network settings
- Checking the network information on the unit
- Setting the network connection method (Wired/Wireless)
- Setting the network parameters automatically (DHCP)
- Setting the network parameters manually
- Setting the use of the Network Standby function
- Setting the MAC address filter
- Setting the MAC address
- Setting the use of a Digital Media Controller
- Setting the use of volume control via AirPlay
- Setting the network name of the unit
- Setting the power interlock from the unit to MusicCast compatible devices
- Configuring the Bluetooth settings
- Configuring the multi zone settings
- Checking the Zone2 information
- Setting the use of volume adjustments for Zone2 output
- Setting the Zone2 limit value of the volume
- Setting the Zone2 initial volume for when the unit is turned on
- Adjusting the time deviation in relation to the main zone
- Switching between stereo and monaural for Zone2 output
- Setting the use of Compressed Music Enhancer for Zone2 output
- Adjusting the tone for Zone2 output
- Setting the use of Extra Bass for Zone2 output
- Adjusting the volume balance for Zone2 output
- Renaming the zone name
- Setting the use of switching to the party mode on Zone2
- Configuring the system settings
- Checking the system information on the unit
- Setting the on-screen menu language
- Combining audio of another input source with video of the current input source
- Setting input sources to be skipped when operating the INPUT key
- Automatically changing the input source names displayed on the front display
- Manually changing the input source names displayed on the front display
- Setting the use of Auto Play function
- Setting sound programs to skip when operating the PROGRAM key
- Setting the function for the PROGRAM key on the remote control
- Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control
- Adjusting the brightness of the front display
- Setting the scale of the volume display
- Setting the use of short messages on the TV
- Setting the image to be used as wallpaper on the TV
- Specifying the condition for the TRIGGER OUT jack to function
- Specifying the output level of the electronic signal transmitted with each input
- Switching the output level for electronic signal transmission manually
- Specifying the zone with which the TRIGGER OUT jack functions are synchronized
- Setting the amount of time for the auto-standby function
- Setting the use of the eco mode
- Preventing accidental changes to the settings
- Updating the firmware via the network
- Configuring the advanced settings (ADVANCED SETUP menu)
- Basic operation of the ADVANCED SETUP menu
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SP IMP.)
- Selecting the remote control ID (REMOTE ID)
- Changing the FM/AM tuning frequency setting (TU)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MON.CHK)
- Selecting the HDMI 4K signal format (4K MODE)
- Setting DTS Format Notification (DTS MODE)
- Backuping and restoring all the settings (BKUP/RSTR)
- Restoring the default settings (INIT)
- Updating the firmware (UPDATE)
- Checking the firmware version (VERSION)
- Updating the Firmware
- Connecting to a Network Wirelessly
- Input/Output Jacks and Cables
- Using Presence Speakers
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Additional Information on HDMI
- Default Settings
- Troubleshooting
- Error Indications
- Specs
- Quick Start Guide
- Bluetooth® Transmission Setup with AV Receivers
- Updating the Firmware
- Warranty
Setup menu items
Use the following table to configure various functions of the unit.
Menu Item Function Page
Speaker
Power Amp Assign
Selects a speaker system. p.94
Configuration
Front
Selects the size of the front speakers. p.94
Center
Selects whether or not a center speaker is connected and its size. p.95
Surround
Selects whether or not surround speakers are connected and their size. p.95
Surround Back
Selects whether or not surround back speakers are connected and their size. p.96
Front Presence
Selects whether or not presence speakers are connected and their size. p.97
Subwoofer
Selects whether or not a subwoofer is connected. p.98
Distance
Sets the distance between each speaker and listening position. p.98
Level
Adjusts the volume of each speaker. p.99
Parametric EQ
Adjusts the tone with an equalizer. p.99
Test Tone
Enables/disables the test tone output. p.100
YPAO Result
Checks and Reloades the previous YPAO adjustments. p.100
Sound
Information
Displays information about the current audio signal. p.101
Lipsync
Delay Enable
Enables/disables the “Lipsync” adjustment configured in “Auto/Manual Select”. p.101
Auto/Manual Select
Selects the method to adjust the delay between video and audio output. p.102
Adjustment
Adjusts the delay between video and audio output manually. p.102
DSP Parameter
DSP Level
Adjusts the sound field effect level. p.104
Initial Delay
Adjusts the delay between the direct sound and presence sound field generation. p.104
Room Size
Adjusts the broadening effect of the presence sound field. p.104
Liveness
Adjusts the loss of the presence sound field. p.105
Reverb Time
Adjusts the decay time of the rear reverberant sound. p.105
Reverb Delay
Adjusts the delay between the direct sound and reverberant sound generation. p.105
Reverb Level
Adjusts the volume of the reverberant sound. p.105
Surround Initial Delay
Adjusts the delay between the direct sound and surround sound field generation. p.106
Surround Room Size
Adjusts the broadening effect of the surround sound field. p.106
Surround Liveness
Adjusts the loss of the surround sound field. p.106
Surround Back Initial
Delay
Adjusts the delay between the direct sound and surround back sound field generation. p.106
Surround Back Room Size
Adjusts the broadening effect of the surround back sound field. p.107
Surround Back Liveness
Adjusts the loss of the surround back sound field. p.107
En
90