Gebruikershandleiding AV-Receiver NL
INHOUD INHOUD VOOR U HET TOESTEL GAAT GEBRUIKEN 9 Lees dit eerst............................................................................................ 9 Deze gids gebruiken.. ................................................................................................................................................................. 9 Woordenlijst.. .....................................................................................................................................................
INHOUD Een tv aansluiten..................................................................................... 67 HDMI-aansluiting op een tv.. ................................................................................................................................................... 67 Aansluiten van weergave-apparatuur.. ...................................................... 69 HDMI-aansluiting op een video-apparaat zoals een BD/DVD-speler............................................................
INHOUD GENIETEN VAN GELUID 100 Genieten van geluidsveldeffecten............................................................ 100 Zelf uw favoriete geluidsmodus selecteren.......................................................................................................................... 100 Genieten van 3-dimensionale geluidsvelden.. .....................................................................................................................
INHOUD Muziek afspelen met AirPlay.. ................................................................. 134 Weergeven van muziek met AirPlay.. .................................................................................................................................... 134 Muziek afspelen van een USB-flashgeheugen............................................. 135 Weergeven van materiaal van een USB-flashgeheugen.. ........................................................................................
INHOUD Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option)....................................................................................... 156 Basisbediening van het menu Option.. ................................................................................................................................. 156 OptionOnderdelen van het menu.. ..............................................................................................................................
INHOUD Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel).. .............................................................. 282 Basisbediening van het menu op het display op het voorpaneel.. ..................................................................................... 282 Items op het menu op het display op het voorpaneel.. .......................................................................................................
INHOUD Op een draadloos netwerk aansluiten....................................................... 357 Selecteren van de netwerkverbindingsmethode.. ............................................................................................................... 357 Instellen van een draadloze verbinding met de WPS-knop.. ............................................................................................... 358 Instellen van een draadloze verbinding met een iPhone.....................................
VOOR U HET TOESTEL GAAT GEBRUIKEN > Lees dit eerst VOOR U HET TOESTEL GAAT GEBRUIKEN Lees dit eerst Deze gids gebruiken Hartelijk dank voor het aanschaffen van dit Yamaha product. Dit toestel is een product waarmee u thuis van video en muziek kunt genieten. Deze gids geeft uitleg over de voorbereidingen en de bediening voor normale gebruikers van het toestel. Om het toestel veilig en op de juiste manier te kunnen gebruiken, moet u deze gids zorgvuldig doorlezen voor u het toestel gaat gebruiken.
VOOR U HET TOESTEL GAAT GEBRUIKEN > Lees dit eerst Woordenlijst Raadpleeg de onderstaande site voor een lijst met woorden die in deze gids worden gebruikt. Hier vindt u uitleg over termen en technologie met betrekking tot dit product en voor Yamaha AV-producten in het algemeen. https://manual.yamaha.
VOOR U HET TOESTEL GAAT GEBRUIKEN > Controleren van de accessoires Controleren van de accessoires Controleren van de accessoires Controleer of de volgende accessoires bij het product zijn geleverd. £ AM-antenne (Behalve modellen voor het V.K., Europa, Rusland en Australië) £ FM-antenne (Behalve modellen voor het V.K., Europa, Rusland en Australië) * Afhankelijk van de regio waarin het product is gekocht, wordt een van bovengenoemde accessoires meegeleverd. £ DAB/FM-antenne (modellen voor het V.K.
VOOR U HET TOESTEL GAAT GEBRUIKEN > Gebruiken van de afstandsbediening Gebruiken van de afstandsbediening Doe de batterijen in de afstandsbediening Plaats de batterijen in de juiste richting.
VOOR U HET TOESTEL GAAT GEBRUIKEN > Gebruiken van de afstandsbediening Werkingsbereik van de afstandsbediening Het bereik van de afstandsbediening wordt getoond op de volgende afbeelding. Richt de afstandsbediening op de sensor voor de afstandsbediening op het toestel.
EIGENSCHAPPEN > Wat u kunt doen met het toestel EIGENSCHAPPEN Wat u kunt doen met het toestel Ondersteuning van diverse luidsprekersystemen Afhankelijk van het aantal luidsprekers dat u gebruikt, kunt u uw favoriete akoestische omgeving kiezen uit een aantal verschillende stijlen. 7.1/5.1.2-kanaalsysteem 5.1.2-kanaalsysteem 7.1-kanaalsysteem 5.1-kanaalsysteem 3.1.2-kanaalsysteem 3.1-kanaalsysteem 2.
EIGENSCHAPPEN > Wat u kunt doen met het toestel Automatisch optimaliseren van de luidsprekerinstellingen De YPAO-functie detecteert luidsprekeraansluitingen, meet de afstanden tussen de luidsprekers en uw luisterplekken (meetposities) met de YPAO-microfoon en optimaliseert vervolgens automatisch de luidsprekerinstellingen, zoals de volumebalans en de akoestische parameters voor uw kamer (YPAO: Yamaha Parametric room Acoustic Optimizer). “Schema voor de luidsprekerconfiguratie” (p.
EIGENSCHAPPEN > Wat u kunt doen met het toestel Genieten van geluidsveldeffecten met grote aanwezigheid Het toestel is voorzien van verschillende geluidsprogramma’s en surrounddecoders waarmee u kunt genieten van weergavebronnen met uw favoriete geluidsmodus (zoals geluidsveldeffect of stereoweergave). “Genieten van 3-dimensionale geluidsvelden” (p. 101) “Genieten van geluidsveldeffecten die geoptimaliseerd zijn voor het type materiaal” (p.
EIGENSCHAPPEN > Wat u kunt doen met het toestel Grote verscheidenheid aan ondersteunde inhoud via netwerk Wanneer het toestel is verbonden met een netwerk, kunt u via het toestel profiteren van de diverse soorten materiaal die beschikbaar zijn op dat netwerk. “Weergeven van muziek met AirPlay” (p. 134) “Weergeven van muziek die is opgeslagen op mediaservers (pc's/NAS)” (p. 137) “Selecteren van een internetradiozender” (p. 138) “Luisteren naar een muziek-streamingdienst” (p.
EIGENSCHAPPEN > Wat u kunt doen met het toestel Materiaal weergeven van verschillende apparaten Het toestel is voorzien van een aantal HDMI-aansluitingen en ingangen/uitgangen waarop u videoapparaten (zoals BD/DVD-spelers), audioapparaten (zoals CD-spelers), Bluetooth apparaten (zoals smartphones), spelcomputers, USB-flashgeheugens en andere apparaten kunt aansluiten. U kunt materiaal hiervan weergeven, of afstemmen op een radiozender. “Luisteren naar de radio” (p.
EIGENSCHAPPEN > Wat u kunt doen met het toestel Handige functies Het toestel is uitgerust met allerlei nuttige functies. De functie SCENE stelt u in staat de signaalbron en de instellingen die zijn geregistreerd voor de bijbehorende scène te selecteren, zoals het geluidsprogramma en of de Compressed Music Enhancer aan/uit staat, met één druk op een toets.
EIGENSCHAPPEN > Wat u kunt doen met het toestel Ondersteuning van draadloze luidsprekers Het toestel is uitgerust met een functie voor het draadloos verbinding maken met luidsprekers. U kunt genieten van audio die wordt afgespeeld op het toestel via een Bluetooth luidspreker/hoofdtelefoon. Met apparatuur die MusicCast Surround ondersteunt, kunt u draadloze surroundluidsprekers en een draadloze subwoofer gebruiken. “Weergeven van muziek met een Bluetooth® luidspreker/hoofdtelefoon” (p.
EIGENSCHAPPEN > Nuttige applicaties Nuttige applicaties AV SETUP GUIDE AV SETUP GUIDE is een applicatie die u helpt met de verbindingen tussen de AV-Receiver en weergaveapparaten en ook met de instelling van de AV-Receiver. Deze app leidt u door de verschillende instellingen zoals luidsprekeraansluitingen, aansluitingen van uw tv en weergaveapparaten en het selecteren van het luidsprekersysteem. Zoek voor details naar “AV SETUP GUIDE” in de App Store of Google Play.
EIGENSCHAPPEN > Nuttige applicaties MusicCast Controller MusicCast Controller is een applicatie die u in staat stelt om een MusicCast compatibel apparaat te koppelen aan andere apparaten die compatibel zijn met MusicCast in andere kamers zodat u op alle apparatuur tegelijk kunt afspelen. Met deze app kunt u uw smartphone of ander mobiel apparaat gebruiken in plaats van de afstandsbediening om muziek te selecteren of om het toestel en de met MusicCast compatibele apparatuur in te stellen.
NAMEN EN FUNCTIES VAN ONDERDELEN > Body van het toestel NAMEN EN FUNCTIES VAN ONDERDELEN Body van het toestel Namen en functies van onderdelen op het voorpaneel De namen en functies van de onderdelen op het voorpaneel zijn als volgt. a b c d e f SELECT/ENTER SCENE ZONE USB YPAO PHONES i j 1 PURE DIRECT 2 3 4 5V 1A g a h k z (aan/uit) Hiermee zet u de hoofdzone aan/uit (stand-by) (p. 81). b Afstandsbedieningssensor Ontvangt afstandsbedieningssignalen (infrarood) (p. 13).
NAMEN EN FUNCTIES VAN ONDERDELEN > Body van het toestel g Stand-byindicator Brandt als het toestel in de stand-bymodus staat in de volgende gevallen. h ( HDMI Control is ingeschakeld (p. 200) ( Standby Through is ingeschakeld (p. 202) ( Network Standby is ingeschakeld (p. 273) ( Bluetooth Standby is ingeschakeld (p. 278) USB-aansluiting Voor het aansluiten van een USB-flashgeheugen (p. 135). i YPAO-aansluiting Voor het aansluiten van de meegeleverde YPAO-microfoon (p. 88).
NAMEN EN FUNCTIES VAN ONDERDELEN > Body van het toestel Voorpaneel Namen en functies van onderdelen op het display op het voorpaneel De namen en functies van de onderdelen op het display op het voorpaneel zijn als volgt. a g a c b d e f h Pictogram voor de bedieningsstand Geeft de huidige stand van het display op het voorpaneel aan (de signaalbronkeuzestand of de informatiekeuzestand). b Standaard signaalbronnaam Toont de standaardnaam wanneer u de signaalbron een andere naam hebt gegeven.
NAMEN EN FUNCTIES VAN ONDERDELEN > Body van het toestel g SELECT/ENTER-indicator Geeft de beschikbare SELECT/ENTER status (drukken of draaien) aan voor het rechter deel van het display. h Aanvullende informatie Toont aanvullende informatie voor de huidige signaalbron, zoals ontvangst, DSP-programma. OPMERKING ( ( Afhankelijk van het weergegeven materiaal is het mogelijk dat het toestel niet de correcte weergavestatus aangeeft.
NAMEN EN FUNCTIES VAN ONDERDELEN > Body van het toestel Selecteren van de informatie voor de signaalbron die wordt weergegeven op het display op het voorpaneel In de informatiekeuzestand toont het display op het voorpaneel aanvullende informatie over de signaalbron. Onderdeel Druk op SELECT/ENTER op het voorpaneel om het display op het voorpaneel in de informatiekeuzestand te zetten. Draai vervolgens aan SELECT/ENTER om te kiezen tussen de diverse items.
NAMEN EN FUNCTIES VAN ONDERDELEN > Body van het toestel Huidige signaalbron Getoond item muziek-streamingdiensten (zonder weergaveDSP-programma, Audiodecoder, Uitgangskanaal, HDMI-status, Systeemstatus, IP-adres, informatie) Ethernet MAC-adres, Wi-Fi MAC-adres Alexa MusicCast Link Bluetooth USB Nummer, Artiest, Album, DSP-programma, Audiodecoder, Uitgangskanaal, HDMI-status, Systeemstatus OPMERKING ( ( U kunt “Information Skip” instellen in het menu “Front Display” om items met informatie op het displ
NAMEN EN FUNCTIES VAN ONDERDELEN > Body van het toestel Namen en functies van onderdelen op het achterpaneel De namen en functies van de onderdelen op het achterpaneel zijn als volgt. a f g h HDMI TRIGGER OUT 12V de bc HDMI OUT 0.
NAMEN EN FUNCTIES VAN ONDERDELEN > Body van het toestel i ANTENNA-aansluitingen Voor de aansluiting op de radio-antennes (p. 71). j Netsnoer Voor de aansluiting op een stopcontact (p. 80). k AUDIO 1-5-aansluitingen Voor de aansluiting op audioweergaveapparaten en de invoer van audiosignalen (p. 70). l SPEAKERS-aansluitingen Voor de aansluiting op luidsprekers (p. 34).
NAMEN EN FUNCTIES VAN ONDERDELEN > Afstandsbediening Afstandsbediening Namen en functies van de onderdelen van de afstandsbediening De namen van de onderdelen en functies van de meegeleverde afstandsbediening zijn als volgt. a b c d MAIN ZONE 2 SLEEP SCENE e 1 3 2 4 STRAIGHT PURE DIRECT ENHANCER SUR.
NAMEN EN FUNCTIES VAN ONDERDELEN > Afstandsbediening a Signaalzender van afstandsbediening Verzendt afstandsbedieningssignalen (infrarood). b z (aan/uit)-toets Schakelt de zone die is geselecteerd met de zone-schakelaar in/uit (p. 151). c SLEEP-toets Stelt de tijd voor de slaaptimer in (p. 140). d Zone-schakelaar Verandert de zone die wordt bestuurd met de afstandsbediening (p. 152). e SCENE-toetsen Schakelt met één druk tussen meerdere instellingen die zijn ingesteld met de SCENE-functie.
NAMEN EN FUNCTIES VAN ONDERDELEN > Afstandsbediening p OPTION-toets Hiermee laat u het menu Option weergeven op de tv (p. 156). q DISPLAY-toets Schakelt het bladerscherm, weergavescherm enz. in/uit.
VOORBEREIDINGEN > Voor u begint VOORBEREIDINGEN Voor u begint Namen en functies van onderdelen van de luidsprekers De namen en functies van de onderdelen van de luidsprekers zijn als volgt. E R 0,5 tot 1 m 0,5 tot 1 m 1 1,8 m 2 3 9 1,8 m 9 4 5 10° tot 30° 10° tot 30° 6 7 0,3 m of meer Luidsprekertype Front Midden Afk. 1/2 3 Functie Produceren geluiden voor het voorkanaal (stereogeluiden). Produceert geluiden voor het middenkanaal (zoals filmdialoog en spraak).
VOORBEREIDINGEN > Voor u begint Gerelateerde links ( ( ( “Schema voorbereidingen (met surroundluidsprekers aangesloten via luidsprekerkabels)” (p. 36) “Schema voorbereidingen (met surroundluidsprekers draadloos aangesloten)” (p. 37) “Opstelling aanwezigheidsluidsprekers” (p.
VOORBEREIDINGEN > Voor u begint Schema voorbereidingen Schema voorbereidingen (met surroundluidsprekers aangesloten via luidsprekerkabels) Het basisschema voor de voorbereidingen voor het gebruiken van het toestel is als volgt. 1 2 3 4 5 6 7 8 9 Plaats de luidsprekers. Sluit de luidsprekers aan. Sluit een tv aan. Sluit weergave-apparatuur aan. Sluit de radio-antennes aan. Voer de voorbereiden voor het aansluiten op een netwerk uit. Voer de instellingen voor het MusicCast netwerk uit.
VOORBEREIDINGEN > Voor u begint Schema voorbereidingen (met surroundluidsprekers draadloos aangesloten) Het basisschema voor de voorbereidingen voor het gebruiken van het toestel met draadloze surroundluidsprekers is als volgt. 1 2 3 4 5 6 7 8 9 10 Plaats de luidsprekers. Sluit de luidsprekers aan. Sluit een tv aan. Sluit weergave-apparatuur aan. Sluit de radio-antennes aan. Voer de voorbereiden voor het aansluiten op een netwerk uit. Voer de instellingen voor het MusicCast netwerk uit.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) Plaatsen van luidsprekers (luidsprekersystemen) Aanbevolen luidsprekersystemen voor het toestel (basisinstelling) Dit luidsprekersysteem haalt de maximale prestaties uit het toestel. U kunt genieten van een zeer natuurlijk 3-dimensionaal geluidsveld met om het even welk materiaal. We raden dit luidsprekersysteem aan voor Dolby Atmos of DTS:X-materiaal. [Zoekterm]#Q01 Luidsprekersystemen n 7.1/5.1.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 5 4 3 2 1 76 RE 9 9 OPMERKING ( ( ( ( De surround-achterluidsprekers en voor-aanwezigheidsluidsprekers produceren niet tegelijkertijd geluiden.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) Andere luidsprekersystemen (basisinstelling) 5.1.2-kanaalsysteem Om volledig te kunnen profiteren van Dolby Atmos of DTS:X-materiaal, raden we u dit luidsprekersysteem aan. De voor-aanwezigheidsluidsprekers produceren een natuurlijk 3-dimensionaal surroundgeluidsveld, inclusief geluiden van boven.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) n Voor een opstelling met voor-aanwezigheidsluidsprekers boven E R 1 2 3 9 9 4 5 10° tot 30° 10° tot 30° AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) OPMERKING ( ( ( Wanneer u de voor-aanwezigheidsluidsprekers in of aan het plafond wilt installeren, of wanneer de Dolby Enabled luidsprekers worden gebruikt als voor-aanwezigheidsluidsprekers, moeten de instellingen voor de opstelling van de vooraanwezigheidsluidsprekers worden veranderd. U kunt ook maximaal 2 subwoofers (met ingebouwde versterker) aansluiten op het toestel.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) 7.1-kanaalsysteem Met dit luidsprekersysteem kunt u profiteren van uitgebreide stereoweergave met behulp van de surroundachterluidsprekers.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 5 4 3 2 1 76 9 9 OPMERKING ( ( U kunt ook maximaal 2 subwoofers (met ingebouwde versterker) aansluiten op het toestel.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) 5.1-kanaalsysteem Dit is een basisopstelling voor uw luidsprekers die we aanraden om te genieten van surroundweergave.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 9 9 54 3 21 OPMERKING ( ( U kunt ook maximaal 2 subwoofers (met ingebouwde versterker) aansluiten op het toestel. Twee subwoofers die zijn aangesloten op het toestel geven hetzelfde geluid weer.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) 3.1.2-kanaalsysteem We raden deze luidsprekeropstelling aan wanneer u geen luidsprekers achter in de ruimte kunt plaatsen. U kunt ook profiteren van de weergave van Dolby Atmos en DTS:X-materiaal met dit luidsprekersysteem.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) AUDIO 1 AUDIO 3 AUDIO 2 (7 TV) AUDIO 4 AUDIO 5 PHONO ZONE OUT ZONE 2 (3 MUSIC) OPTICAL COAXIAL PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) 3.1-kanaalsysteem Deze luidsprekeropstelling wordt aanbevolen voor stereoweergave met een middenluidspreker. Op deze manier kan het geluid voor het middenkanaal, zoals de gesproken tekst van een film, duidelijk worden weergegeven.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL PHONO ZONE OUT ZONE 2 PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 321 9 OPMERKING ( ( U kunt ook maximaal 2 subwoofers (met ingebouwde versterker) aansluiten op het toestel. Twee subwoofers die zijn aangesloten op het toestel geven hetzelfde geluid weer.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) 2.1-kanaalsysteem Dit is een luidsprekeropstelling die we aanraden om te genieten van stereoweergave.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 9 21 OPMERKING ( ( U kunt ook maximaal 2 subwoofers (met ingebouwde versterker) aansluiten op het toestel. Twee subwoofers die zijn aangesloten op het toestel geven hetzelfde geluid weer.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) Virtual CINEMA FRONT Deze luidsprekeropstelling raden we aan wanneer u geen luidsprekers achter in de ruimte kunt plaatsen.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) AUDIO 1 AUDIO 3 AUDIO 2 (7 TV) AUDIO 4 AUDIO 5 PHONO ZONE OUT ZONE 2 (3 MUSIC) OPTICAL COAXIAL PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 54 3 21 9 OPMERKING ( ( ( Om Virtual CINEMA FRONT te kunnen gebruiken, moeten de instellingen voor de luidsprekerconfiguratie worden veranderd.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) Luidsprekersystemen die de interne versterker van het toestel gebruiken (geavanceerde instelling) Lijst met luidsprekersystemen die de interne versterker van het toestel gebruiken Naast de basisluidsprekersystemen kunt u met het toestel ook de volgende luidsprekerconfiguraties toepassen. Om gebruik te kunnen maken van de volgende systemen, moet u de vereiste luidsprekerinstellingen configureren via “Power Amp Assign” in het menu “Setup”.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) 7.1 +1Zone Met de functie Zone kunt u een signaalbron laten weergeven in de ruimte waar het toestel is geïnstalleerd en in een andere ruimte.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) OPMERKING ( ( ( ( Om het Zone-luidsprekersysteem te kunnen gebruiken, moeten de instellingen voor de luidsprekerconfiguratie worden veranderd. U kunt ook maximaal 2 subwoofers (met ingebouwde versterker) aansluiten op het toestel. Twee subwoofers die zijn aangesloten op het toestel geven hetzelfde geluid weer. Wanneer u slechts een enkele subwoofer gebruikt, kunt u deze naar keuze links of rechts plaatsen.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) 5.1.2 +1Zone Met de functie Zone kunt u een signaalbron laten weergeven in de ruimte waar het toestel is geïnstalleerd en in een andere ruimte.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) OPMERKING ( ( ( ( Om het Zone-luidsprekersysteem te kunnen gebruiken, moeten de instellingen voor de luidsprekerconfiguratie worden veranderd. U kunt ook maximaal 2 subwoofers (met ingebouwde versterker) aansluiten op het toestel. Twee subwoofers die zijn aangesloten op het toestel geven hetzelfde geluid weer. Wanneer u slechts een enkele subwoofer gebruikt, kunt u deze naar keuze links of rechts plaatsen.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) BI-AMP U kunt voorluidsprekers aansluiten die bi-ampaansluitingen ondersteunen. Om bi-ampaansluitingen in te schakelen, moet u de vereiste luidsprekerinstellingen configureren.
VOORBEREIDINGEN > Plaatsen van luidsprekers (luidsprekersystemen) LET OP Voordat u bi-ampaansluitingen maakt, verwijdert u beugels of kabels die een woofer verbinden met een tweeter. Als u geen biampaansluitingen maakt, zorg dan dat de beugels of kabels zijn aangesloten voordat u de luidsprekerkabels aansluit. Raadpleeg de handleiding van de luidsprekers voor meer informatie. ( OPMERKING ( De volgende luidsprekers kunnen niet tegelijkertijd worden aangesloten.
VOORBEREIDINGEN > De luidsprekers aansluiten De luidsprekers aansluiten Vereisten voor de luidsprekers Het apparaat heeft 7 interne versterkers. Afhankelijk van uw luisteromgeving en het geluid waarvan u wilt genieten, kunt u 2 tot 9 luidsprekers en maximaal 2 subwoofers (met ingebouwde versterker) op het toestel aansluiten. De luidsprekers en subwoofers die kunnen worden aangesloten op dit toestel moeten voldoen aan de volgende eisen: Gebruik de volgende luidsprekers.
VOORBEREIDINGEN > De luidsprekers aansluiten Vereisten voor de bedrading Gebruik de volgende typen in de handel verkrijgbare kabels om de luidsprekers aan te sluiten op het toestel. Luidsprekerkabels (voor het aansluiten van de luidsprekers) ( + – ( + – Audio-penstekkerkabel (om een subwoofer aan te sluiten) Gerelateerde links “Aansluiten van een luidspreker” (p.
VOORBEREIDINGEN > De luidsprekers aansluiten Aansluiten van de luidsprekers Aansluiten van een luidspreker Sluit de luidsprekerkabels correct aan tussen de negatieve (-) aansluiting van het toestel en de negatieve (-) aansluiting van de luidspreker; en tussen de positieve (+) aansluiting van het toestel en de positieve (+) aansluiting van de luidspreker. Haal de stekker van het netsnoer van het toestel uit het stopcontact voordat u een luidspreker aansluit.
VOORBEREIDINGEN > De luidsprekers aansluiten 4 Maak de aansluiting vast. Hiermee is de aansluiting voltooid. OPMERKING ( ( Als de melding “Check SP Wires” verschijnt op het display op het voorpaneel wanneer het toestel wordt ingeschakeld, moet u het toestel uitschakelen en dan controleren of er kortsluiting bestaat in de luidsprekerdraden. (Alleen bij modellen voor de V.S.
VOORBEREIDINGEN > De luidsprekers aansluiten De subwoofer aansluiten Gebruik een audio-plugkabel om de subwoofer aan te sluiten. Haal de stekkers van de netsnoeren van het toestel en de subwoofer uit het stopcontact voor u de subwoofer aansluit. Audioplugkabel ZONE ZONEOUT 2 FRON PRE OU T T SUBW OOFER 1 2 Gerelateerde links “HDMI-aansluiting op een tv” (p.
VOORBEREIDINGEN > Een tv aansluiten Een tv aansluiten HDMI-aansluiting op een tv Sluit een tv aan op het toestel met een HDMI-kabel. Wanneer de tv-audio wordt weergegeven door het toestel, kunt u de functie eARC/ARC, of een optisch digitale kabel om het audiosignaal van de tv over te brengen naar het toestel. [Zoekterm]#Q02 Tv aansluiten OPMERKING ( ( ( ( ( Gebruik een 19-pens HDMI-kabel met het HDMI-logo.
VOORBEREIDINGEN > Een tv aansluiten n Aansluiten van een optisch digitale kabel Als uw tv geen ondersteuning biedt voor eARC/ARC, moet u uw tv op het toestel aansluiten met een optisch digitale kabel. Het toestel (achterzijde) HDMI OUT-aansluiting HDMI-ingang TRIGGER OUT 12V HDMI OUT 0.
VOORBEREIDINGEN > Aansluiten van weergave-apparatuur Aansluiten van weergave-apparatuur HDMI-aansluiting op een video-apparaat zoals een BD/DVDspeler Sluit een videoapparaat aan op het toestel met een HDMI-kabel. HDMI 1-7-aansluitingen HDMI 1 2 3 (1 MOVIE) (5 STB) (6 GAME) Het toestel (achterzijde) 5 6 7 HDMI TRIGGER OUT 12V 4 HDMI OUT 0.
VOORBEREIDINGEN > Aansluiten van weergave-apparatuur Een andere dan een HDMI-aansluiting op een weergaveapparaat AUDIO-aansluiting op een audio-apparaat zoals een CD-speler Sluit audioapparaten zoals CD-spelers aan op het toestel. Kies een van de volgende aansluitingen, afhankelijk van welke audio-uitgangen beschikbaar zijn op het audioapparaat.
VOORBEREIDINGEN > Aansluiten van de radio-antennes Aansluiten van de radio-antennes Aansluiten van de FM-antenne Model voor V.S., Canada, Azië, Korea, China, Taiwan, Brazilië, Algemeen en Midden en Zuid-Amerika Sluit de meegeleverde FM-antenne aan op het toestel. Maak het uiteinde van de FM-antenne vast aan een wand.
VOORBEREIDINGEN > Aansluiten van de radio-antennes Aansluiten van de AM-antenne Model voor V.S., Canada, Azië, Korea, China, Taiwan, Brazilië, Algemeen en Midden en Zuid-Amerika Sluit de meegeleverde AM-antenne aan op het toestel. Plaats de AM-antenne op een vlak oppervlak.
VOORBEREIDINGEN > Aansluiten van de radio-antennes Gerelateerde links “Netwerkverbinding van het toestel” (p.
VOORBEREIDINGEN > Aansluiten van de radio-antennes Aansluiten van de DAB/FM-antenne Model voor V.K., Europa, Rusland en Australië Sluit de meegeleverde DAB/FM-antenne aan op het toestel. Bevestig de uiteinden van de antenne aan een wand. DAB/FM-antenne Het toestel (achterzijde) HDMI 3 NETWORK 4 5 6 7 (4 NET RADIO) (8 SERVER) (6 GAME) PHONO ZONE OUT ZONE 2 PRE OUT FRONT SUBWOOFER 1 ANTENNA ( 2 RADIO ) DAB/FM 75 2 EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F.
VOORBEREIDINGEN > Voorbereiden op aansluiting op een netwerk Voorbereiden op aansluiting op een netwerk Netwerkverbinding van het toestel Het toestel ondersteunt verbindingen via bedrading en draadloze verbindingen. Selecteer een verbindingsmethode overeenkomstig uw netwerkomgeving. U kunt op het toestel genieten van internetradio of muziekbestanden die zijn opgeslagen op mediaservers, zoals pc’s en Network Attached Storage (NAS).
VOORBEREIDINGEN > Voorbereiden op aansluiting op een netwerk Aansluiten van een netwerkkabel (verbinding via bedrading) Sluit het toestel aan op uw router met een in de handel verkrijgbare STP-netwerkkabel (rechte, direct doorverbonden (“straight”) kabel van CAT5 of hoger). Wanneer u een router gebruikt die DHCP ondersteunt, hoeft u geen netwerkinstellingen te configureren voor het toestel.
VOORBEREIDINGEN > Voorbereiden op aansluiting op een netwerk Voorbereiden draadloze antennes (draadloze verbinding) Zet de draadloze antennes rechtop om verbinding te maken met het draadloze netwerk of met Bluetooth apparatuur. LET OP ( Oefen geen overdreven kracht uit op de antenne voor de draadloze netwerkverbinding. Hierdoor kan de antenne beschadigd raken. Gerelateerde links ( ( ( “Het toestel aan het MusicCast netwerk toevoegen” (p. 85) “Selecteren van de netwerkverbindingsmethode” (p.
VOORBEREIDINGEN > Andere apparaten aansluiten Andere apparaten aansluiten Een externe eindversterker aansluiten Wanneer u een externe eindversterker (of gecombineerde voorversterker/eindversterker) aansluit om de weergave via de luidsprekers te verbeteren, moet u de ingangsaansluitingen van de eindversterker aansluiten op de PRE OUT-aansluitingen van het toestel. Via de PRE OUT-aansluitingen worden dezelfde kanaalsignalen geproduceerd als via de overeenkomstige SPEAKERS-aansluitingen.
VOORBEREIDINGEN > Andere apparaten aansluiten Een apparaat aansluiten dat compatibel is met de triggerfunctie Met de triggerfunctie kan een extern apparaat worden bediend in combinatie met de bediening van het toestel (zoals in-/uitschakelen en signaalselectie). Als u een Yamaha-subwoofer hebt die een systeemaansluiting of een apparaat met een triggeringang ondersteunt, kunt u de triggerfunctie gebruiken door het externe apparaat aan te sluiten op de TRIGGER OUT-aansluitingen met een mono ministekkerkabel.
VOORBEREIDINGEN > Het toestel aan zetten Het toestel aan zetten Aansluiten van het netsnoer Als u alle aansluitingen hebt uitgevoerd, sluit u het netsnoer aan. Het toestel (achterzijde) NETWORK 6 7 (4 NET RADIO) (8 SERVER) Op een wandstopcontact ANTENNA SUBWOOFER AM ( 2 RADIO ) FM 75 Gerelateerde links “Het toestel aan/uit (standby) zetten (Hoofdzone)” (p.
VOORBEREIDINGEN > Het toestel aan zetten Het toestel aan/uit (standby) zetten (Hoofdzone) Schakel de hoofdzone heen en weer tussen aan en uit (standby). OPMERKING De hoofdzone is de ruimte waar het toestel is geïnstalleerd. 1 2 Zet de zoneschakelaar op “MAIN”. Druk op z. Met elke druk op deze toets schakelt u de hoofdzone in of uit (standby). OPMERKING Wanneer u het toestel voor de eerste keer inschakelt, verschijnt de melding over het instellen van het netwerk op de tv.
VOORBEREIDINGEN > Selecteren van de taal voor het menu Selecteren van de taal voor het menu Selecteren van de taal voor het menu Om de gewenste menutaal in te kunnen stellen, moet u de tv instellen op het videosignaal van het toestel en dan op SETUP drukken. Selecteer vervolgens “Language” van het “SETUP” menu. Gerelateerde links ( ( ( “Instellen van de menutaal” (p. 281) “Basisbediening van het menu Setup” (p. 176) “Wat is MusicCast” (p.
VOORBEREIDINGEN > MusicCast instellen MusicCast instellen Wat is MusicCast MusicCast is een draadloze muziekapplicatie van Yamaha, die u in staat stelt muziek te delen via allerlei apparatuur in alle kamers van uw huis. U kunt genieten van muziek van uw smartphone, pc, NAS-schijf, internetradiozender en muziek-streamingdienst op elke plek in uw huis met een enkele, gemakkelijk te gebruiken applicatie genaamd “MusicCast Controller”.
VOORBEREIDINGEN > MusicCast instellen Gebruiken van MusicCast Controller Om gebruik te kunnen maken van de netwerkfuncties van met MusicCast compatibele apparatuur, heeft u de speciale “MusicCast Controller” applicatie nodig. Zoek de gratis applicatie “MusicCast Controller” op in de App Store of op Google Play en installeer de app op uw apparaat. Gerelateerde links “Het toestel aan het MusicCast netwerk toevoegen” (p.
VOORBEREIDINGEN > MusicCast instellen Het toestel aan het MusicCast netwerk toevoegen Voer de procedure hieronder uit om het toestel toe te voegen aan het MusicCast netwerk. U kunt tegelijk de draadloze netwerkinstellingen van het toestel configureren. 1 Start de “MusicCast Controller” applicatie op uw mobiele apparaat op en tik op “Setup”. 2 Bedien de “MusicCast Controller” applicatie door de instructies op uw scherm te volgen.
VOORBEREIDINGEN > Gebruiken de MusicCast Surround-functie Gebruiken de MusicCast Surround-functie Configureren van draadloze luidsprekers Gebruiken van apparatuur die de MusicCast Surround-functie ondersteunt, stelt u in staat om te genieten van een 5.1.2-kanaals of 5.1-kanaals systeem met draadloze surroundluidsprekers en een draadloze subwoofer. OPMERKING Raadpleeg de handleidingen van de apparaten die de MusicCast Surround-functie ondersteunen voor details over instellingen en bedieningshandelingen.
VOORBEREIDINGEN > Gebruiken de MusicCast Surround-functie OPMERKING ( ( In een 5.1.2-kanaals of 5.1-kanaals systeem, kunnen er draadloze surroundluidsprekers en een draadloze subwoofer worden gebruikt. Bij andere systemen kan alleen een draadloze subwoofer worden gebruikt. Met draadloze surroundluidsprekers Er zal geen geluid worden weergegeven via de luidsprekeraansluitingen (SURROUND) van het toestel. Er kunnen geen surround-achterluidsprekers worden gebruikt.
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen Configureren van de luidsprekerinstellingen Schema voor de luidsprekerconfiguratie Voor u het toestel gaat gebruiken, moet u de luidsprekerinstellingen zoals de volumebalans en de akoestische parameters aanpassen. Via de meegeleverde YPAO-microfoon detecteert het toestel welke luidsprekers er zijn aangesloten en meet het de afstanden tussen de luidsprekers en uw luisterplek(ken) die gebruikt wordt (worden) als meetpositie(s).
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen 5 Sluit de YPAO-microfoon aan op de YPAO-aansluiting. Het toestel (voorzijde) 1 9 2 3 4 5 Oorhoogte Het volgende scherm wordt weergegeven op de tv.
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen 6 Begin de meting aan de hand van de begeleiding op het scherm. Als u een item onder “Measuring option” (Meetoptie) wilt inschakelen, moet u het item selecteren. Het volgende scherm wordt weergegeven op de tv als de meting is voltooid. Druk op ENTER nadat de meetresultaten bevestigd zijn.
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen Gerelateerde links ( ( ( ( ( ( “De luidsprekerimpedantie instellen” (p. 198) “Toewijzen luidsprekerconfiguratie” (p. 92) “Foutmeldingen bij YPAO” (p. 98) “Waarschuwingen bij YPAO” (p. 99) “Automatisch configureren van de luidsprekerinstellingen op basis van de YPAO-meetresultaten ” (p. 94) “Automatisch aanpassen van het volume van hoge en lage frequenties aan de hand van het volume” (p.
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen Toewijzen luidsprekerconfiguratie Als u een van de volgende luidsprekerconfiguraties gebruikt, moet u de overeenkomende luidsprekerinstellingen handmatig configureren.
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen Optionele YPAO-meting YPAO-metingen op meerdere luisterplekken (multi-meting) Selecteer de “Multi Measure” optie als u meerdere luisterplekken hebt of als u wilt dat anderen ook kunnen genieten van surroundgeluid. U kunt metingen uitvoeren op maximaal 8 verschillende posities in de ruimte. De luidsprekerinstellingen worden geoptimaliseerd voor het gebied dat wordt gedefinieerd door die posities.
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen Automatisch configureren van de luidsprekerinstellingen op basis van de YPAO-meetresultaten Automatisch configureren van de luidsprekerinstellingen op basis van de YPAO-multimetingresultaten Voer de volgende procedure uit om een meting te doen wanneer de optie “Multi Measure” is geselecteerd. Het duurt ongeveer 15 minuten om 8 luisterposities te meten. OPMERKING ( ( Tijdens de meting worden testtonen uitgezonden op hoog volume.
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen 5 Sluit de YPAO-microfoon aan op de YPAO-aansluiting. Het toestel (voorzijde) 1 9 2 3 4 5 Oorhoogte 6 Selecteer “Multiple” als meetoptie op het scherm.
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen 7 Begin de meting aan de hand van de begeleiding op het scherm. Het volgende scherm wordt weergegeven op de tv als de meting op de eerste positie is voltooid. 8 Verplaats de YPAO-microfoon naar de volgende luisterplek en selecteer “OK”. Herhaal dit tot de metingen op alle luisterplekken (maximaal 8) zijn uitgevoerd. 9 Wanneer de metingen op de posities die u wilt meten voltooid zijn, selecteert u “Skip”.
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen LET OP ( De YPAO-microfoon is gevoelig voor warmte. Plaats de microfoon daarom niet op een locatie waar deze wordt blootgesteld aan direct zonlicht of hoge temperaturen (bijvoorbeeld op AV-apparatuur).
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen Foutmeldingen bij YPAO Als er een foutmelding wordt weergegeven, moet u het probleem oplossen door de instructies op het scherm te volgen en dan de YPAO nogmaals uitvoeren. [Zoekterm]#Q03 YPAO-fout Foutbericht Oplossing E-1:No Front SP E-2:No Sur. SP E-3:No F.PRNS SP Sluit YPAO af, zet het toestel uit en controleer de luidsprekeraansluitingen. E-4:No Sur. Back SP E-5:Noisy Zorg dat het stil is in de kamer en voer de YPAO nogmaals uit.
VOORBEREIDINGEN > Configureren van de luidsprekerinstellingen Waarschuwingen bij YPAO Als er een waarschuwing wordt weergegeven, moet u het probleem oplossen door de tabel te volgen en de YPAO nogmaals uit te voeren. U kunt de meetresultaten nog steeds toepassen, maar we raden u aan het probleem op te lossen en dan de YPAO nog eens uit te voeren om het toestel te kunnen gebruiken met de optimale luidsprekerinstellingen.
GENIETEN VAN GELUID > Genieten van geluidsveldeffecten GENIETEN VAN GELUID Genieten van geluidsveldeffecten Zelf uw favoriete geluidsmodus selecteren Het toestel is uitgerust met allerlei geluidsprogramma's en surrounddecoders. U kunt genieten van signaalbronnen met uw favoriete geluidsmodus, bijvoorbeeld een geluidsveldeffect of stereoweergave. MAIN ZONE 2 SLEEP SCENE 1 3 2 4 STRAIGHT PURE DIRECT ENHANCER SUR.
GENIETEN VAN GELUID > Genieten van geluidsveldeffecten Genieten van 3-dimensionale geluidsvelden Het toestel is uitgerust met diverse geluidsprogramma’s die gebruik maken van de originele DSP-technologie van Yamaha (CINEMA DSP 3D). Hiermee kunt u in uw kamer op een eenvoudige manier geluidsvelden creëren zoals in echte bioscoopzalen of concertzalen en genieten van natuurlijke 3-dimensionale geluidsvelden.
GENIETEN VAN GELUID > Genieten van geluidsveldeffecten Genieten van geluidsveldeffecten die geoptimaliseerd zijn voor het type materiaal Het toestel is uitgerust met allerlei geluidsprogramma's. U kunt genieten van audiobronnen met uw favoriete weergavestand. U kunt een geluidsprogramma selecteren door op PROGRAM te drukken. We raden u aan een geluidsprogramma te selecteren uit de categorie “MOVIE” op het display op het voorpaneel om van video's te kunnen genieten.
GENIETEN VAN GELUID > Genieten van geluidsveldeffecten Standard Dit programma maakt een geluidsveld dat de nadruk legt op het surroundgevoel zonder de oorspronkelijke akoestische positionering van meerkanaals audio aan te tasten. Het ontwerp is gebaseerd op het concept van de ideale bioscoop, waarin het publiek wordt omhuld door de mooie trillingen van links, rechts en van achteren. Spectacle Dit programma levert de schaal en grandeur van spektakelfilms.
GENIETEN VAN GELUID > Genieten van geluidsveldeffecten Genieten van geluidsveldeffecten zonder surroundluidsprekers (Virtual CINEMA DSP) Als u een van de geluidsprogramma’s selecteert wanneer er geen surroundluidsprekers zijn aangesloten, creëert dit toestel automatisch het surroundgeluidsveld met de voorluidsprekers. U kunt genieten van geluidsveldeffecten zonder surroundluidsprekers. OPMERKING Virtual CINEMA DSP werkt niet bij “2ch Stereo” en “All-Channel Stereo”.
GENIETEN VAN GELUID > Genieten van geluidsveldeffecten Surround-weergave met 5 luidsprekers vooraan (Virtual CINEMA FRONT) Wanneer de surroundluidsprekers voorin worden geplaatst en “Virtual CINEMA FRONT” in het “Setup” menu wordt ingesteld op “On”, zal het toestel achterin virtuele surroundluidsprekers creëren. U kunt alleen genieten van multikanaals surroundweergave wanneer er luidsprekers voorin de ruimte geplaatst worden. Gerelateerde links ( ( “Instellen van het gebruik van Virtual CINEMA FRONT” (p.
GENIETEN VAN GELUID > Genieten van geluidsveldeffecten Met de hoofdtelefoon genieten van surroundgeluid (SILENT CINEMA) U kunt met een hoofdtelefoon genieten van surround- of geluidsveldeffecten zoals een multikanaals luidsprekersysteem door de hoofdtelefoon aan te sluiten op de PHONES-aansluiting en een geluidsprogramma of surrounddecoder te selecteren. Gerelateerde links ( ( “Genieten van geluidsveldeffecten die geoptimaliseerd zijn voor het type materiaal” (p.
GENIETEN VAN GELUID > Genieten van onverwerkte weergave Genieten van onverwerkte weergave Genieten van het oorspronkelijke geluid (gewone of onbewerkte decodeermodus) U kunt signaalbronnen weergeven zonder enige geluidsveldeffecten. Het toestel produceert stereoweergave uit de voorluidsprekers voor 2-kanaalsbronnen zoals CD´s, en produceert niet-verwerkte multikanaalsweergave voor multikanaalsbronnen. Met elke druk op STRAIGHT wordt de gewone decodeermodus ingeschakeld of uitgeschakeld.
GENIETEN VAN GELUID > Genieten van onverwerkte weergave Genieten van multikanaals weergave zonder geluidsveldeffecten (surrounddecoder) Het toestel schakelt meerkanaals weergave van 2-kanaals/meerkanaals bronnen zonder geluidsveldeffecten in. Druk op SUR. DECODE om een surrounddecoder te selecteren. Elke keer dat u op SUR. DECODE drukt, verandert de surrounddecoder. OPMERKING ( ( ( ( ( U kunt de surrounddecoder ook aanpassen via “Sur.Decode” in het menu “Setup”.
GENIETEN VAN GELUID > Genieten van onverwerkte weergave Genieten van weergave met hogere kwaliteit (Pure Direct) Het toestel stelt u in staat te genieten van weergave met een hoge kwaliteit en minder ruis. Allerlei verwerkingsfuncties en bepaalde schakelingen (zoals het display op het voorpaneel) die niet nodig zijn voor de basiswerking van de weergave, worden uitgeschakeld. Met elke druk op PURE DIRECT wordt de modus voor rechtstreeks afspelen ingeschakeld of uitgeschakeld.
GENIETEN VAN GELUID > Genieten van 3-dimensionale geluidsweergave Genieten van 3-dimensionale geluidsweergave Genieten van Dolby Atmos® en DTS:X™ Afspelen van Dolby Atmos of DTS:X-materiaal creëert een realistische weergave die uit alle richtingen komt, ook van boven. Om te kunnen profiteren van het volledige effect, raden we u een luidsprekersysteem met voor-aanwezigheidsluidsprekers aan.
GENIETEN VAN GELUID > Genieten van uw favoriete weergave Genieten van uw favoriete weergave Genieten van een krachtiger weergave van de signaalbron (Compressed Music Enhancer) U kunt genieten van een dynamische weergave door het geluid dieper en weidser te maken. Deze functie kan worden gebruikt naast andere geluidsmodi. Voor digitaal gecomprimeerde signalen kunt u een rijkere weergave bereiken die de originele weergave voor compressie zeer dicht benadert.
GENIETEN VAN GELUID > Genieten van uw favoriete weergave Verbeteren van het lage frequentiebereik van de subwoofer U kunt het lage frequentiebereik van de subwoofer verbeteren terwijl interferentie met de voorluidsprekers in het midden en lage frequentiebereik vermeden wordt. Stel “Subwoofer Trim” op het menu “Option” in. Gerelateerde links “Instellen van het volume van de subwoofer” (p.
GENIETEN VAN GELUID > Genieten van uw favoriete weergave Genieten van een krachtige weergave bij een laag volume U kunt de niveaus van de hoge en lage frequenties die bijna niet te horen zijn bij een laag volume, automatisch laten corrigeren op basis van de auditieve sensatie. Stel “YPAO Volume” op het menu “Option” in. OPMERKING ( ( “YPAO Volume” werkt nadat er een YPAO-meting is uitgevoerd. “YPAO Volume” wordt automatisch ingeschakeld na de YPAO-meting.
GENIETEN VAN GELUID > Genieten van uw favoriete weergave Gesproken tekst beter verstaanbaar maken U kunt het volume van gesproken tekst zo instellen dat deze beter verstaanbaar wordt. Stel “Dialogue Level” op het menu “Setup” in. Gerelateerde links “Aanpassen van het volume van dialooggeluid” (p.
GENIETEN VAN GELUID > Genieten van uw favoriete weergave Genieten van basweergave met kleine luidsprekers (Extra Bass) U kunt genieten van voldoende basweergave ongeacht de grootte van de voorluidsprekers en de aanwezigheid of afwezigheid van de subwoofer. Stel “Extra Bass” op het menu “Setup” in. Gerelateerde links “Instellen van het gebruik van Extra Bass” (p.
GENIETEN VAN GELUID > Genieten van uw favoriete weergave Genieten van betere weergave Genieten van muziekstreamingdiensten ( U kunt naar betere weergave van muziekstreamingdiensten luisteren. Stel Compressed Music Enhancer in op “On” (Aan). Zie voor details: “Genieten van een krachtiger weergave van de signaalbron (Compressed Music Enhancer)” (p. 111) ( Nachts genieten van weergave bij een laag volume ( Weergave bij een laag volume is moeilijk verstaanbaar. Stel “Adaptive DRC” in op “On”.
WEERGAVE > Basisweergaveprocedure WEERGAVE Basisweergaveprocedure Basisprocedure voor het weergeven van video en muziek De basisprocedure voor het weergeven van video en muziek is als volgt. 1 2 Zet de externe apparatuur aan. Gebruik de signaalkeuzetoetsen om een signaalbron te selecteren. MAIN ZONE 2 SLEEP SCENE 1 3 2 4 PROGRAM PROGR PR OGRAM AM STRAIGHT PURE DIRECT ENHANCER SUR.
WEERGAVE > Basisweergaveprocedure Namen en functies van de onderdelen van het weergavescherm Wanneer de weergave begint, zal het weergavescherm verschijnen op de tv. 1 2 a Statusindicators Geven de huidige instellingen voor shuffle/herhalen en de weergavestatus (zoals play/pause) weer. b Weergave-informatie Geeft de naam van de artiest, de naam van het album, de titel van het nummer, het tracknummer, de zendernaam en de verstreken tijd weer.
WEERGAVE > Basisweergaveprocedure Namen en functies van de onderdelen van het bladerscherm Wanneer de volgende signaalbron wordt geselecteerd, zal het bladerscherm verschijnen op de tv. SERVER NET RADIO USB ( ( ( 1 4 2 5 3 a b Lijstnaam Lijst met inhoud Toont de lijst met beschikbaar materiaal. Selecteer een item en druk op ENTER om uw keuze te bevestigen.
WEERGAVE > Weergeven van audio van de tv Weergeven van audio van de tv Weergeven van audio van de tv met eARC/ARC Sluit een tv met ondersteuning voor eARC/ARC aan op het toestel met een HDMI-kabel om de audio van de tv weer te kunnen geven met het toestel. Wanneer u een tv-programma selecteert met de afstandsbediening van de tv, wordt de signaalbron van het toestel automatisch omgeschakeld naar “TV” en zal de audio van de tv worden weergegeven door het toestel.
WEERGAVE > Weergeven van audio van de tv Weergeven van audio van de tv met een optisch digitale kabel In het volgende geval moet u een optisch digitale kabel gebruiken om het audiosignaal van de tv over te brengen naar het toestel. Uw tv biedt geen ondersteuning voor eARC/ARC. U wilt eARC/ARC niet gebruiken. ( ( 1 2 Stel “ARC” in het menu “Setup” in op “Off”. Selecteer videomateriaal (een tv-programma) met de afstandsbediening van de tv.
WEERGAVE > Luisteren naar de radio Luisteren naar de radio Voorbereidingen voor het luisteren naar de radio De frequentiestappen instellen Model voor Azië, Taiwan, Brazilië, Algemeen en Midden en Zuid-Amerika Stel de grootte van de frequentiestappen voor het afstemmen van de radio in aan de hand van de standaard voor uw land of regio. In de fabriek wordt de instelling voor frequentiestappen ingesteld op 50 kHz voor FM en 9 kHz voor AM.
WEERGAVE > Luisteren naar de radio Het afstemmen van DAB voorbereiden Model voor V.K., Europa, Rusland en Australië Voor u gaat luisteren naar DAB-radio (Digital Audio Broadcasting), moet u een eerste scan uitvoeren om de DAB-radiozenders automatisch te registreren. 1 2 Selecteer “TUNER” als de signaalbron. 3 Druk op [jTUNING] om een eerste scan te starten. Druk op BAND om de DAB-band te selecteren.
WEERGAVE > Luisteren naar de radio Frequency Zenderlabel 194,064 MHz 7D 195,936 MHz 8A 197,648 MHz 8B 199,360 MHz 8C 201,072 MHz 8D 202,928 MHz 9A 204,640 MHz 9B 206,352 MHz 9C 208,064 MHz 9D 209,936 MHz 10A 211,648 MHz 10B 213,360 MHz 10C 215,072 MHz 10D 216,928 MHz 11A 218,640 MHz 11B 220,352 MHz 11C 222,064 MHz 11D 223,936 MHz 12A 225,648 MHz 12B 227,360 MHz 12C 229,072 MHz 12D 230,784 MHz 13A 232,496 MHz 13B 234,208 MHz 13C 235,776 MHz 13D 237,488 MHz
WEERGAVE > Luisteren naar de radio Luisteren naar de radio U kunt met de ingebouwde tuner van het toestel afstemmen op een radiozender. 1 Selecteer “TUNER” als de signaalbron. “TUNER” wordt geselecteerd als signaalbron, en vervolgens verschijnt de momenteel geselecteerde frequentie op het display op het voorpaneel. “TUNED” op het display op het voorpaneel licht op wanneer het toestel een signaal van een radiozender ontvangt. Ook gaat “STEREO” branden wanneer er een stereo radiosignaal wordt ontvangen.
WEERGAVE > Luisteren naar de radio De Radio Data System-informatie weergeven Model voor V.K., Europa en Rusland Het Radio Data Systeem is een systeem voor gegevensoverdracht door FM-zenders. Het toestel kan diverse soorten gegevens ontvangen, zoals “Program Service”, “Program Type”, “Radio Text” en “Clock Time” wanneer het toestel is afgestemd op een Radio Data System-zender. 1 2 Stem af op de gewenste Radio Data System-zender.
WEERGAVE > Luisteren naar de radio De DAB-informatie weergeven Model voor V.K., Europa, Rusland en Australië Het toestel kan diverse soorten DAB-gegevens ontvangen wanneer het is afgestemd op een DABradiozender. 1 2 Stem af op de gewenste DAB-radiozender. Druk SELECT/ENTER op het voorpaneel in en draai om te kiezen tussen de diverse onderdelen op het display. De informatie verschijnt op het display op het voorpaneel.
WEERGAVE > Luisteren naar de radio Een radiozender handmatig registreren Stem af op een radiozender en registreer deze als een voorkeuzezender. 1 2 3 Stem af op de gewenste radiozender. 4 Druk op MEMORY. Houd MEMORY 3 seconden ingedrukt. Druk op PRESET en selecteer het voorkeuzenummer. Hiermee is de registratie voltooid. OPMERKING ( ( ( ( U kunt tot 40 FM/AM-zenders registreren als voorkeuzezenders.
WEERGAVE > Luisteren naar de radio FM-radiozenders automatisch registreren (Auto Preset) U kunt FM-radiozenders automatisch laten registreren. FM-radiozenders met sterke signalen worden automatisch geregistreerd onder de voorkeuzenummers. 1 2 Selecteer de FM-radioband. 3 Druk op PRESET om het voorkeuzenummer vanaf waar u de registratie wilt starten te selecteren. 4 Druk op [jTUNING]. Houd MEMORY 3 seconden ingedrukt. Het automatisch registreren van voorkeuzezenders zal nu beginnen.
WEERGAVE > Luisteren naar de radio Voorkeuzezenders wissen Wist radiozender die onder de voorkeuzenummers zijn geregistreerd. 1 2 Selecteer “TUNER” als de signaalbron. 3 4 Druk op PRESET om de voorkeuzezender die u wilt wissen te selecteren. Houd MEMORY 3 seconden ingedrukt. Druk op MODE. De voorkeuzezender wordt gewist. 5 6 Herhaal de stappen 3 - 4 tot alle gewenste voorkeuzezenders zijn gewist. Druk op BAND. Het display op het voorpaneel keert terug naar de signaalbronkeuzestand.
WEERGAVE > Weergeven van muziek via een Bluetooth® verbinding Weergeven van muziek via een Bluetooth® verbinding Weergeven van muziek van een Bluetooth® apparaat met dit toestel U kunt muziekbestanden die zijn opgeslagen op een Bluetooth apparaat (zoals een smartphone) weergeven met het toestel. VOORZICHTIG Wanneer u een apparaat met Bluetooth gebruikt om het volume te regelen, kan het volume onverwacht luid zijn, wat kan leiden tot problemen met uw gehoor, of schade aan apparatuur.
WEERGAVE > Weergeven van muziek via een Bluetooth® verbinding Gerelateerde links ( ( ( ( “Instellen van het gebruik van Bluetooth®” (p. 276) “Namen en functies van de onderdelen van het weergavescherm” (p. 118) “Instellen van het gebruik van volumeregeling via AirPlay/Bluetooth” (p. 173) “Verbreken van de verbinding tussen een Bluetooth® apparaat en het toestel” (p.
WEERGAVE > Weergeven van muziek via een Bluetooth® verbinding Weergeven van muziek met een Bluetooth® luidspreker/ hoofdtelefoon U kunt genieten van audio die wordt afgespeeld op het toestel via een Bluetooth luidspreker/hoofdtelefoon. U moet een verbinding maken met een Bluetooth luidspreker/hoofdtelefoon waarvan het volume kan worden geregeld. U kunt het volume van de Bluetooth luidspreker/hoofdtelefoon niet regelen met het toestel.
WEERGAVE > Muziek afspelen met AirPlay Muziek afspelen met AirPlay Weergeven van muziek met AirPlay Met AirPlay kunt u muziek laten weergeven door het toestel. Tik (klik) op het pictogram van AirPlay op uw iPhone of in iTunes/muziek en selecteer het toestel als het audioweergave-apparaat. VOORZICHTIG ( Wanneer u een apparaat met AirPlay gebruikt om het volume te regelen, kan het volume onverwacht luid zijn, wat kan leiden tot problemen met uw gehoor, of schade aan apparatuur.
WEERGAVE > Muziek afspelen van een USB-flashgeheugen Muziek afspelen van een USB-flashgeheugen Weergeven van materiaal van een USB-flashgeheugen U kunt muziekbestanden die zijn opgeslagen op een USB-flashgeheugen weergeven op het toestel. 1 Sluit het USB-flashgeheugen aan op de USB-aansluiting. Het toestel (voorzijde) ZONE USB YPAO PURE DIRECT PHONES 5V 1A USB-flashgeheugen 2 Selecteer “USB” als de signaalbron. Het bladerscherm wordt weergegeven op de tv.
WEERGAVE > Muziek afspelen van een USB-flashgeheugen Gerelateerde links ( ( ( ( ( “Namen en functies van de onderdelen van het bladerscherm” (p. 119) “Namen en functies van de onderdelen van het weergavescherm” (p. 118) “Configureren van de shuffle-instelling” (p. 171) “Configureren van de instelling voor herhaalde weergave” (p. 172) “Registreren van favoriet materiaal als snelkoppeling” (p.
WEERGAVE > Muziek afspelen van mediaservers (pc’s/NAS) Muziek afspelen van mediaservers (pc’s/NAS) Weergeven van muziek die is opgeslagen op mediaservers (pc's/NAS) U kunt muziekbestanden die zijn opgeslagen op uw mediaserver weergeven via het toestel. OPMERKING U moet van tevoren de instelling voor het delen van media op elk van de gebruikte apparaten of in de software van mediaservers correct configureren. Raadpleeg de bedieningsinstructies van het apparaat of de software voor meer informatie.
WEERGAVE > Naar internetradio luisteren Naar internetradio luisteren Selecteren van een internetradiozender Selecteer een internetradiozender en start de weergave. 1 Selecteer “NET RADIO” als de signaalbron. Het bladerscherm wordt weergegeven op de tv. 2 Selecteer een item. De weergave begint en het weergavescherm wordt geopend. OPMERKING ( ( ( ( ( ( Druk herhaaldelijk op NET om de signaalbron te selecteren.
WEERGAVE > Luisteren naar muziek-streamingdiensten Luisteren naar muziek-streamingdiensten Luisteren naar een muziek-streamingdienst U kunt genieten van muziek van streamingdiensten. Voor details omtrent ondersteunde muziek-streamingdiensten verwijzen we u naar de productinformatie op de website van Yamaha of de MusicCast Controller app. Aanvullende informatie over muziek-streamingdiensten kunt u ook terugvinden op de volgende website. https://manual.yamaha.
HANDIGE FUNCTIES > Slaaptimerfunctie HANDIGE FUNCTIES Slaaptimerfunctie Instellen van de tijd voor de slaaptimer Het toestel schakelt over naar uit (stand-by) wanneer de ingestelde tijd verstreken is. Druk herhaaldelijk op SLEEP om de tijd voor de slaaptimer in te stellen (120 min, 90 min, 60 min, 30 min, off). Wanneer de slaaptimer is ingeschakeld, zal de indicator voor de slaaptimer oplichten op het display op het voorpaneel.
HANDIGE FUNCTIES > SCENE-functie SCENE-functie De signaalbron en favoriete instellingen selecteren met één aanraking (SCENE) De functie SCENE stelt u in staat de signaalbron en de instellingen die zijn geregistreerd voor de bijbehorende scène te selecteren met één druk op een toets.
HANDIGE FUNCTIES > SCENE-functie Selecteren van een geregistreerde scène Druk op de volgende toets op de afstandsbediening, zodat de signaalbron en de instellingen die zijn geregistreerd voor de corresponderende scène direct worden geselecteerd. Het toestel wordt automatisch ingeschakeld als het in de stand-bymodus staat.
HANDIGE FUNCTIES > SCENE-functie Zone2 SCENE (1): AUDIO1 SCENE (2): TUNER SCENE (3): AUDIO2 SCENE (4): NET RADIO SCENE (5): AUDIO3 SCENE (6): AUDIO4 SCENE (7): USB SCENE (8): SERVER Gerelateerde links ( ( “Instellen van de functies van de kleurtoetsen op de afstandsbediening” (p. 259) “Selecteren van de onderdelen die u als scènetoewijzingen wilt opnemen” (p.
HANDIGE FUNCTIES > SCENE-functie Een scène registreren U kunt de standaardinstelling die is toegewezen aan elk van de SCENE-toetsen veranderen. Wanneer “NET”, “USB” of “TUNER” is geselecteerd als signaalbron, kunt u de toegewezen radiozender of ander materiaal registreren. [Zoekterm]#Q04 SCENE 1 2 Bepaal welke instellingen van het toestel u wilt toewijzen aan een bepaalde scène. Houd de gewenste SCENE-toets op de afstandsbediening ingedrukt totdat de volgende melding verschijnt.
HANDIGE FUNCTIES > Snelkoppelingsfunctie Snelkoppelingsfunctie Registreren van favoriet materiaal als snelkoppeling U kunt favoriet materiaal (zoals muziek op een mediaserver en internetradiozenders) als snelkoppeling registreren. 1 2 Geef het muzieknummer of de radiozender die u wilt registreren weer. Houd MEMORY 3 seconden ingedrukt. MAIN ZONE 2 SLEEP SCENE 1 3 2 4 TOPP MENU TO POP UP/MENU HOME STRAIGHT PURE DIRECT ENHANCER SUR.
HANDIGE FUNCTIES > Snelkoppelingsfunctie Oproepen van geregistreerd materiaal als snelkoppeling U kunt geregistreerd materiaal (zoals muziek op een mediaserver en internetradiozenders) opnieuw oproepen door het snelkoppelingsnummer te selecteren. 1 Druk op BLUETOOTH, NET of USB. MAIN ZONE 2 SLEEP SCENE 1 3 2 4 PROGRAM PROGR PR OGRAM AM STRAIGHT PURE DIRECT ENHANCER SUR.
GENIETEN VAN WEERGAVE IN MEERDERE RUIMTES (ZONES) > Zones voorbereiden GENIETEN VAN WEERGAVE IN MEERDERE RUIMTES (ZONES) Zones voorbereiden Weergave in meerdere ruimtes (multizone-functie) U kunt een signaalbron weergeven in de ruimte waar het toestel is geïnstalleerd en in een andere ruimte. U kunt het toestel op uw favoriete manier gebruiken, bijvoorbeeld terwijl u in de woonkamer (Hoofdzone) naar de tv kijkt, kan er iemand anders in de studeerkamer (Zone2) naar de radio luisteren.
GENIETEN VAN WEERGAVE IN MEERDERE RUIMTES (ZONES) > Zones voorbereiden Voorbeelden van multizoneconfiguratie U kunt van muziek genieten via luidsprekers die in andere ruimtes zijn geplaatst. n Ggebruiken van de SPEAKERS-aansluitingen Audio Studeerkamer (Zone2) Woonkamer (Hoofdzone) n Gebruiken van de ZONE OUT-aansluitingen Audio Studeerkamer (Zone2) Woonkamer (Hoofdzone) Gerelateerde links “Zone-luidsprekers aansluiten op de interne versterker van het toestel” (p.
GENIETEN VAN WEERGAVE IN MEERDERE RUIMTES (ZONES) > Zones voorbereiden Zone-luidsprekers aansluiten Zone-luidsprekers aansluiten op de interne versterker van het toestel Sluit de zone-luidsprekers met luidsprekerkabels aan op het toestel. Verander de instelling voor uw luidsprekerconfiguratie aan de hand van de aangesloten luidsprekers. LET OP ( Haal de stekker van het netsnoer van het toestel uit het stopcontact voordat u de luidsprekers aansluit.
GENIETEN VAN WEERGAVE IN MEERDERE RUIMTES (ZONES) > Zones voorbereiden Zone-luidsprekers aansluiten met een externe versterker Sluit de externe versterker die in de zone is geplaatst met een stereo-penstekkerkabel aan op het toestel. U kunt het volume voor de weergave in de zone regelen op het toestel. Wanneer u een externe versterker gebruikt met een eigen volumeregeling , moet u “Volume” bij “Zone2” in het menu “Setup” instellen op “Fixed”.
GENIETEN VAN WEERGAVE IN MEERDERE RUIMTES (ZONES) > Bedieningszones Bedieningszones De stroom voor zones in-/uitschakelen Schakel de stroom voor elk van de zones heen en weer tussen aan en uit. 1 2 Zet de zoneschakelaar op de afstandsbediening op de zone die u wilt bedienen. Druk op z. Met elke druk op deze toets kunt u de zone aan/uit zetten. Wanneer de zone is ingeschakeld, licht “ZONE” op het display op het voorpaneel op.
GENIETEN VAN WEERGAVE IN MEERDERE RUIMTES (ZONES) > Bedieningszones Basisprocedure zone-weergave De basisprocedure voor weergave in een bepaalde zone is als volgt. De zone die is ingeschakeld met de zoneschakelaar kan worden bediend. 1 2 3 4 5 Schakel de zone in. Zet de externe apparatuur die is aangesloten op dit toestel aan. Gebruik de signaalkeuzetoetsen om een signaalbron te selecteren. Start de weergave op het externe apparaat of selecteer een radiozender. Druk op VOLUME om het volume aan te passen.
GENIETEN VAN WEERGAVE IN MEERDERE RUIMTES (ZONES) > Bedieningszones Andere procedure in de zone Een andere procedure voor elk van de zones is als volgt. Druk op de SCENE-toets om de signaalbron en de instellingen te selecteren met een enkele druk op de toets. Om de slaaptimer (120 min, 90 min, 60 min, 30 min, off (uit)) in te stellen, moet u herhaaldelijk op SLEEP drukken. De weergave in de zone zal na de ingestelde tijd worden uitgeschakeld.
GENIETEN VAN WEERGAVE IN MEERDERE RUIMTES (ZONES) > Bedieningszones Genieten van dezelfde bron in meerdere ruimtes (partymodus) Met de partymodus kunt u in alle zones dezelfde muziek afspelen als in de hoofdzone. Tijdens de partymodus wordt stereoweergave automatisch geselecteerd voor alle zones. Elke keer dat u op PARTY drukt, wordt de partymodus ingeschakeld of uitgeschakeld. Gerelateerde links “Instellen van het gebruik van omschakelen naar de partymodus in de zone” (p.
INSTELLINGEN > Het toestel configureren INSTELLINGEN Het toestel configureren Gebruik van het menu Het toestel is uitgerust met de volgende menu's. Menu “Option”: Hiermee kunt u de weergave-instellingen configureren afhankelijk van de signaalbron die op dit moment wordt weergegeven. Bedien dit menu op de tv met de afstandsbediening. Menu “Setup”: U kunt de diverse functies van het toestel configureren. Bedien dit menu op de tv met de afstandsbediening.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Basisbediening van het menu Option Voer de volgende basisprocedure uit om het menu “Option” te bedienen. Bedien dit menu op de tv met de afstandsbediening. 1 Druk op OPTION. MAIN ZONE 2 SLEEP SCENE 1 3 2 MUTE 4 STRAIGHT PURE DIRECT ENHANCER SUR.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Gerelateerde links “Standaardinstellingen van het menu Option” (p.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) OptionOnderdelen van het menu Gebruik de volgende tabel om de weergave-instellingen van het toestel te configureren. Onderdeel Pagina YPAO Volume p. 159 Adaptive DRC p. 160 Adaptive DSP Level p. 161 Enhancer p. 162 Input Trim p. 163 Subwoofer Trim p. 164 Lipsync p. 165 Format p. 166 Channel In p. 166 Channel Out p. 166 Sampling p. 166 Dialogue p. 166 Video In p. 167 Video Out p.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Automatisch configureren van het volume op basis van de YPAO-meetresultaten Automatisch aanpassen van het volume van hoge en lage frequenties aan de hand van het volume Selecteert of de niveaus van de hoge en de lage frequenties automatisch moeten worden aangepast aan het volume. Als deze functie is ingesteld op “On”, kunt u ook bij een laag volume genieten van een natuurlijke weergave.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Automatisch aanpassen van het dynamische bereik Selecteert of het dynamische bereik (van maximum naar minimum) automatisch moet worden aangepast aan het volume. Als deze functie is ingesteld op “On”, is dit handig om ’s nachts met een laag volume te luisteren. Menu Option “YPAO Volume” > “Adaptive DRC” Instellingen Off Regelt het dynamisch bereik niet automatisch.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Configureren van DSP/Surround Automatisch aanpassen van het niveau van het geluidsveldeffect Selecteert of het effectniveau van het geluidsprogramma automatisch aangepast moet worden. Menu Option “DSP/Surround” > “Adaptive DSP Level” Instellingen Off Het effectniveau wordt niet automatisch aangepast. On Past het effectniveau automatisch aan op basis van de YPAO-meetresultaten en de volumeinstelling.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Instellen van Compressed Music Enhancer Selecteert of Compressed Music Enhancer gebruikt wordt. U kunt ook ENHANCER op de afstandsbediening gebruiken om Compressed Music Enhancer in/uit te schakelen. Menu Option “DSP/Surround” > “Enhancer” Instellingen Off Schakelt Compressed Music Enhancer uit. On Schakelt Compressed Music Enhancer in.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Corrigeren van volumeverschillen tijdens weergave Corrigeren van volumeverschillen tussen signaalbronnen Corrigeert volumeverschillen tussen signaalbronnen. Als u hinder ondervindt van volumeverschillen bij het schakelen tussen signaalbronnen, gebruikt u deze functie om dat te corrigeren.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Instellen van het volume van de subwoofer Stelt het volume van de subwoofer nauwkeurig in. Menu Option “Volume Trim” > “Subwoofer Trim” Instelbereik -6,0 dB tot +6,0 dB Gerelateerde links “Basisbediening van het menu Option” (p.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Inschakelen van de Lipsync-aanpassing Selecteert of de aanpassingen die zijn geconfigureerd in “Lipsync” in het menu “Setup” worden gebruikt of niet. Menu Option “Lipsync” > “Lipsync” Instellingen Off Schakelt de aanpassing “Lipsync” uit. On Schakelt de aanpassing “Lipsync” in. OPMERKING Deze instelling wordt afzonderlijk op elke signaalbron toegepast.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Controleren van de audiosignaal-informatie Geeft informatie weer over het audiosignaal. Menu Option “Audio Signal Information” Format Channel In Channel Out De audio-indeling van het ingangssignaal Het aantal bronkanalen in het ingangssignaal (voor/surround/LFE) “3/2/0.1” betekent bijvoorbeeld 3 voorkanalen, 2 surroundkanalen en LFE.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Controleren van de videosignaal-informatie Geeft informatie weer over de videosignalen.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Combineren van een audio-ingangsaansluiting met een HDMIingangsaansluiting Selecteert de audio-ingangsaansluiting waarvan de audio moet worden weergegeven in combinatie met een bepaalde HDMI-ingangsaansluiting. U kunt HDMI-video weergeven met audio die binnenkomt via een andere audio-ingangsaansluiting dan de HDMI-ingangsaansluiting.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Selecteren van een videobron die met de geselecteerde audiobron moet worden weergegeven Selecteert een videobron die met de geselecteerde audiobron moet worden weergegeven. U kunt naar video van een andere signaalbron kijken terwijl u naar de radio enz. luistert. Menu Option “Video Out” > “Video Out” Instellingen Off Geeft geen videosignalen weer.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Instellen van het gebruik van de automatische weergavefunctie (Auto Play) Selecteert of de automatische weergavefunctie (Auto Play)gebruikt moet worden voor materiaal zoals streamingdiensten. Menu Option “Auto Play” Instellingen Off Schakelt de automatische weergavefunctie uit. On Begint automatisch het laatst weergegeven materiaal weer te geven.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Configureren van de shuffle-instelling Configureert de instelling voor shuffle-weergave. Menu Option “Shuffle” > “Shuffle” Instellingen Off Zet de functie afspelen in willekeurige volgorde uit. On Speelt nummers in het huidige album (map) in willekeurige volgorde af. OPMERKING Deze instelling is alleen beschikbaar wanneer “USB” of “SERVER” is geselecteerd als signaalbron.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Configureren van de instelling voor herhaalde weergave Configureert de instelling voor herhaalde weergave. Menu Option “Repeat” > “Repeat” Instellingen Off Zet de functie herhalen uit. One Speelt het huidige nummer herhaaldelijk af. All Speelt alle nummers in het huidige album (map) herhaaldelijk af.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Instellen van het gebruik van volumeregeling via AirPlay/ Bluetooth Selecteert of de volumeregeling via AirPlay en Bluetooth apparaten gebruikt moet worden. Als er iets anders is ingesteld dan “Off”, kunt u het volume van het toestel regelen vanaf de AirPlay en Bluetooth apparaten. Menu Option “Volume Interlock” > “Interlock” Instellingen Off Schakelt de volumeregeling via AirPlay/Bluetooth apparaten uit.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Een “NET RADIO” zender toevoegen aan de map “Favorieten” Wanneer u “NET RADIO” selecteert als signaalbron, kunt u de radiozender die op dit moment wordt weergegeven registreren in de map “Favorites”. In het weergavescherm wordt de huidige zender toegevoegd aan de map “Favorites”. In het bladerscherm wordt de geselecteerde zender toegevoegd aan de map “Favorites”.
INSTELLINGEN > Weergave-instellingen configureren voor verschillende weergavebronnen (menu Option) Een radiozender verwijderen uit de map “Favorieten” Verwijdert een radiozender uit de map “Favorites”. Selecteer van tevoren op het bladerscherm de zender die u wilt verwijderen.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Verschillende functies configureren (menu Setup) Basisbediening van het menu Setup Voer de volgende basisprocedure uit om het menu “Setup” te bedienen. Bedien dit menu op de tv met de afstandsbediening. 1 Druk op SETUP. MAIN ZONE 2 SLEEP SCENE 1 3 2 MUTE 4 STRAIGHT PURE DIRECT ENHANCER SUR.
INSTELLINGEN > Verschillende functies configureren (menu Setup) OPMERKING ( ( Als er nieuwe firmware beschikbaar is, zal de melding op het scherm verschijnen. Als er nieuwe firmware beschikbaar is, verschijnt het enveloppictogram (p) in het menu “Setup”. Gerelateerde links ( ( “De firmware van het toestel bijwerken via het netwerk” (p. 299) “Standaardinstellingen van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Onderdelen van het menu Setup Luidspreker-instellingen Onderdeel Pagina Power Amp Assign Configuration p. 187 Subwoofer p. 188 Front p. 189 Center p. 189 Surround p. 189 Surround Back p. 189 Presence p. 189 Layout p. 190 Crossover p. 191 Subwoofer Phase p. 192 Extra Bass p. 193 Virtual CINEMA FRONT p. 194 Distance p. 195 Level p. 196 Equalizer p. 197 Speaker Impedance p. 198 Test Tone p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) HDMI-instellingen Onderdeel Pagina HDMI Control p. 200 Audio Output p. 201 Standby Through p. 202 4K Upscaling p. 203 HDCP Version p. 204 Standby Sync p. 205 ARC p. 206 HDMI Video Format p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Geluidsinstellingen Onderdeel Pagina Tone Control DSP Parameter Surround Decoder All-Channel Stereo Lipsync Dialogue Volume Virtual Speaker p. 209 (geluidsprogramma) p. 210 Surround Decode p. 212 Center Image p. 213 Level p. 214 Front / Rear Balance p. 215 Left / Right Balance p. 216 Height Balance p. 217 Monaural Mix p. 218 Select p. 219 Adjustment p. 220 Dialogue Level p. 221 DTS Dialogue Control p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Scène-instellingen Onderdeel Pagina Scene Setting p. 230 Scene Rename p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Multizone-instellingen Onderdeel Pagina Information p. 233 Volume (zone) Sound Mode Volume p. 234 Max Volume p. 235 Initial Volume p. 236 Left / Right Balance p. 237 Monaural p. 238 Enhancer p. 239 Extra Bass p. 240 Tone Control Tone Control p. 241 Audio Delay Audio Delay p. 242 Party Mode Set p. 243 Zone Rename p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Functie-instellingen Onderdeel Input Setting Pagina Input Rename p. 245 Input Skip p. 247 TV Audio Input p. 248 DSP Skip Trigger Output p. 249 Trigger Mode p. 250 Target Zone p. 253 Display Settings User Interface ECO Tuner Dimmer p. 254 Volume p. 255 Short Message p. 256 Position p. 257 Touch Sound p. 258 Remote Color Key p. 259 Memory Guard p. 260 Auto Power Standby p. 261 ECO Mode p. 262 Frequency Step p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Netwerkinstellingen Onderdeel Pagina Information p. 268 Network Connection p. 269 IP Address p. 271 DMC Control p. 272 Network Standby p. 273 Network Name p. 274 MusicCast Link Power Interlock p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Bluetooth instellingen Onderdeel Pagina Bluetooth Audio Receive Audio Send p. 276 Disconnect p. 277 Bluetooth Standby p. 278 Transmitter p. 279 Device Search p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Taalinstelling Onderdeel Pagina Language p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Configureren van de luidsprekerinstellingen Instellen van uw luidsprekersysteem Selecteert de instelling aan de hand van de aangesloten luidsprekers. Instelmenu (Setup) “Speaker” > “Power Amp Assign” Instellingen Basic Een normaal luidsprekersysteem. 7.1 +1Zone Zone-luidsprekers in aanvulling op het 7.1-systeem in de hoofdzone. 5.1.2 +1Zone Zone-luidsprekers in aanvulling op het 5.1.2-systeem in de hoofdzone.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van een subwoofer Selecteert de instelling aan de hand van uw subwoofer. Instelmenu (Setup) “Speaker” > “Configuration” > “Subwoofer” Instellingen Er zijn één of twee subwoofers aangesloten. Use None De subwoofer produceert geluid van het LFE-kanaal (lagefrequentie-effect) en lagefrequentiecomponenten van andere kanalen. Er is geen subwoofer aangesloten. De voorluidsprekers produceren de lagefrequentiecomponenten.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen of een luidspreker al dan niet gebruikt wordt en hoe groot de luidspreker is Selecteert de instelling aan de hand van het gebruik en de afmetingen van uw luidsprekers. Instelmenu (Setup) “Speaker” > “Configuration” > (luidspreker) Instellingen Small Large Kleine luidsprekers. Als algemene richtlijn is de diameter van de woofer kleiner dan 16 cm. De subwoofer produceert de lagefrequentiecomponenten (instelbaar in “Crossover”).
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de opstelling van de voor-aanwezigheidsluidsprekers Selecteert een opstelling met voor-aanwezigheidsluidsprekers. Deze instelling maakt het mogelijk om het geluidsveldeffect te optimaliseren. Instelmenu (Setup) “Speaker” > “Configuration” > “Layout” Instellingen Front Height De voor-aanwezigheidsluidsprekers zijn geïnstalleerd aan de voorwand. Overhead De voor-aanwezigheidsluidsprekers zijn geïnstalleerd aan het plafond.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de cross-overfrequentie voor de lagefrequentiecomponenten Bepaalt de onderlimiet van de lagefrequentiecomponenten die kunnen worden weergegeven door een luidspreker waarvan de grootte is ingesteld op “Small”. Een geluidsfrequentie of toon die lager is dan de gespecificeerde waarde wordt geproduceerd door de subwoofer of de voorluidsprekers.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de fase van de subwoofer Stelt de fase in van de subwoofer. Als het basgeluid niet voldoende wordt weergegeven, schakelt u de fase van de subwoofer om. Instelmenu (Setup) “Speaker” > “Configuration” > “Subwoofer Phase” Instellingen Normal Keert de fase van de subwoofer niet om. Reverse Keert de fase van de subwoofer om. Gerelateerde links ( ( “Instellen van het gebruik van een subwoofer” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van Extra Bass Gebruikt Extra Bass om de lage tonen te verbeteren. Als deze functie is ingesteld op “On”, kunt u genieten van voldoende lage tonen, onafhankelijk van de voorluidsprekers en de aan- of afwezigheid van een subwoofer. Instelmenu (Setup) “Speaker” > “Configuration” > “Extra Bass” Instellingen Off Schakelt Extra Bass uit. On Schakelt Extra Bass in.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van Virtual CINEMA FRONT Selecteert of Virtual CINEMA FRONT gebruikt moet worden. Instelmenu (Setup) “Speaker” > “Configuration” > “Virtual CINEMA FRONT” Instellingen Off Schakelt Virtual CINEMA FRONT uit. On Schakelt Virtual CINEMA FRONT in. OPMERKING Deze instelling is niet beschikbaar wanneer “Surround” in het menu “Setup” is ingesteld op “None”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de afstand tussen elk van de luidsprekers en de luisterplek Bepaalt de afstand zodat het geluid van elke luidspreker de luisterpositie op hetzelfde moment bereikt. Instelmenu (Setup) “Speaker” > “Distance” > (luidspreker) Instelbereik 0,30 m t/m 24,00 m OPMERKING Selecteer eerst de afstandseenheid uit “Meter” of “Feet” bij “Unit”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van het volume van elk van de luidsprekers Past het volume van elk van de luidsprekers aan voor uw luisterplek. Instelmenu (Setup) “Speaker” > “Level” > (luidspreker) Instelbereik -10,0 dB tot +10,0 dB OPMERKING Met behulp van de testtoonweergave kunt u de luidsprekerbalans afstellen en het effect waarnemen. Gerelateerde links ( ( ( “Instellen of een luidspreker al dan niet gebruikt wordt en hoe groot de luidspreker is” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de equalizer Selecteert het equalizertype om de toon aan te passen. Instelmenu (Setup) “Speaker” > “Equalizer” > “EQ Select” Instellingen GEQ Stelt de equalizer handmatig in. YPAO:Flat Past elk van de luidsprekers aan om dezelfde kenmerken te verkrijgen. YPAO:Front Past elk van de luidsprekers aan om dezelfde kenmerken te verkrijgen als de voorluidsprekers.
INSTELLINGEN > Verschillende functies configureren (menu Setup) De luidsprekerimpedantie instellen Stelt de instellingen van de luidsprekerimpedantie van het toestel in overeenkomstig de impedantie van de aangesloten luidsprekers. Instelmenu (Setup) “Speaker” > “Speaker Impedance” Instellingen 6Ω MIN 8Ω MIN Voor luidsprekers van 6 Ohm of hoger. U kunt ook luidsprekers van 4 Ohm gebruiken als voorluidsprekers. Voor luidsprekers van 8 Ohm of hoger. Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Weergeven van testtonen Geeft de testtoon weer waarmee u de luidsprekerbalans of de equalizer kunt afstellen terwijl u het effect ervan waarneemt. Instelmenu (Setup) “Speaker” > “Test Tone” Instellingen Off Er wordt geen testtoon weergegeven. On Geeft testtonen weer. Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Configureren van de HDMI-instellingen Instellen van het gebruik van HDMI Control Selecteert of HDMI Control, waarmee apparatuur die compatibel is met HDMI Control kan worden bediend, zal worden gebruikt. Instelmenu (Setup) “HDMI” > “HDMI Control” Instellingen Off On Schakelt HDMI Control uit. Schakelt HDMI Control in. De instellingen bij “Standby Sync” en “ARC” worden toegepast.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de weergave van HDMI-audio via de luidsprekers van de tv Selecteert of HDMI-audio zal worden weergegeven via de luidsprekers van een tv die is aangesloten op de HDMI OUT-aansluiting. Instelmenu (Setup) “HDMI” > “Audio Output” Instellingen Off Schakelt audioweergave via de tv uit. On Schakelt audioweergave via de tv in.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van HDMI Standby Through Selecteert of video/audio, die binnenkomt via HDMI-aansluitingen, moet worden doorgestuurd naar de tv wanneer het toestel uit (stand-by) staat. Instelmenu (Setup) “HDMI” > “Standby Through” Instellingen Off Geen uitvoer van video/audio naar de tv. On Uitvoer van video/audio naar de tv. Het toestel verbruikt meer stroom dan wanneer “Off” of “Auto” is geselecteerd.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van 4K upscaling (opwaarderen) van het HDMIvideosignaal Selecteert of 4K upscaling (opwaarderen) van het HDMI-videosignaal zal worden gebruikt. Wanneer deze functie is ingesteld op “On”, wordt beeldmateriaal met een resolutie van 1080p weergegeven met een resolutie van 4K. Instelmenu (Setup) “HDMI” > “4K Upscaling” Instellingen Off Schakelt 4K upscaling uit. On Schakelt 4K upscaling in.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Selecteren van de HDCP-versie voor de HDMI-ingangsaansluitingen Selecteert de HDCP-versie van de HDMI-ingangsaansluitingen. U kunt deze functie instellen voor het bekijken van 4K/8K-videomateriaal als dat nodig is. Deze instelling wordt afzonderlijk toegepast op elke HDMI-ingang. Instelmenu (Setup) “HDMI” > “HDCP Version” > (HDMI-ingang) Instellingen Auto Stelt de HDCP-versie automatisch in aan de hand van het weergegeven materiaal. 1.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Koppelen van de aan/uit-standbystand van dit toestel en de tv Selecteert of HDMI Control moet worden gebruikt om het uit (stand-by) zetten van het toestel te koppelen aan dat van de tv wanneer “HDMI Control” in het menu “Setup” is ingesteld op “On”. Instelmenu (Setup) “HDMI” > “Standby Sync” Instellingen Off De stand-bymodus van het toestel wordt niet gekoppeld. On Zet het toestel in de stand-bymodus als de tv is uitgeschakeld.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van ARC Selecteert of u audio van de tv wilt laten weergeven via de luidsprekers die zijn aangesloten op het toestel wanneer “HDMI Control” in het menu “Setup” is ingesteld op “On”. Instelmenu (Setup) “HDMI” > “ARC” Instellingen Off Schakelt ARC uit. On Schakelt ARC in. OPMERKING U hoeft de instelling “On” (fabrieksinstelling) normaal gezien niet te wijzigen.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het HDMI 4K/8K-signaalformaat Selecteert het formaat van signalen die worden ingevoerd/uitgevoerd door het toestel als een HDMI 4K/8Kcompatibele tv en weergaveapparaat worden aangesloten op het toestel. Deze instelling wordt afzonderlijk toegepast op elke HDMI-ingang. Instelmenu (Setup) “HDMI” > “HDMI Video Format” > (HDMI-ingang) Instellingen 4K Mode 1 Ontvangt/produceert 4K-signalen zoals aangegeven in de volgende tabel.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Configureren van de geluidsinstellingen Aanpassen van de toon van de geluidsweergave Hiermee past u apart het niveau van het bereik van de hoge tonen (Treble) en dat van de lage tonen (Bass) aan. Instelmenu (Setup) “Sound” > “Tone Control” Instelbereik -6,0 dB tot +6,0 dB OPMERKING ( ( ( Wanneer zowel “Treble” als “Bass” 0,0 dB zijn, zal “Bypass” verschijnen.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van het niveau van het geluidsveldeffect Regelt het effectniveau van het geluidsprogramma om het geluidsveldeffect te verhogen of te verminderen. Selecteer het geluidsprogramma en druk op ENTER om het in te stellen.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Onderdeel Functie Surround Back Room Size Regelt het breedte-effect van het surround-achtergeluidsveld. Een hogere waarde versterkt het breedte-effect en een lagere waarde verzwakt het. 0,1-2,0 Het achter-surroundgeluidsveld wordt aan de achterkant gecreëerd. Instellingen Regelt het verlies van het surround-achtergeluidsveld. Een hogere waarde versterkt de reflectiviteit en een lagere waarde verzwakt Surround Back Liveness het.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Selecteren van de in het programma te gebruiken surrounddecoder Selecteert een surrounddecoder. Dit wordt gebruikt wanneer “Surround Decode” is geselecteerd met PROGRAM op de afstandsbediening. Instelmenu (Setup) “Sound” > “Surround Decoder” > “Surround Decode” Instellingen Maakt gebruik van de automatisch door de signaalbron geselecteerde decoder.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van de plaatsing van het middelpunt (breedte-effect) van het voorste geluidsveld aan Regelt de plaatsing van het middelpunt (breedte-effect) van het voor-geluidsveld wanneer “Neo:6 Music” is geselecteerd als surrounddecoder. Een hogere waarde versterkt de plaatsing van de weergave in het middelpunt (minder breedte-effect) en een lagere waarde verzwakt de plaatsing van de weergave in het middelpunt te verzwakken (meer breedte-effect).
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van het gehele volume Past het gehele volume aan. Deze instelling werkt als “All-Channel Stereo” is geselecteerd bij de geluidsprogramma's. Instelmenu (Setup) “Sound” > “All-Channel Stereo” > “Level” Instelbereik -5 tot +5 Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van de balans van het volume voor en achter Past de balans van het volume voor en achter aan. Een hogere waarde versterkt de voorkant en een lagere waarde versterkt de achterkant. Deze instelling werkt als “All-Channel Stereo” is geselecteerd bij de geluidsprogramma's. Instelmenu (Setup) “Sound” > “All-Channel Stereo” > “Front / Rear Balance” Instelbereik -5 tot +5 Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van de balans van het volume links en rechts Past de balans van het volume links en rechts aan. Een hogere waarde versterkt de rechterkant en een lagere waarde versterkt de linkerkant. Deze instelling werkt als “All-Channel Stereo” is geselecteerd bij de geluidsprogramma's. Instelmenu (Setup) “Sound” > “All-Channel Stereo” > “Left / Right Balance” Instelbereik -5 tot +5 Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de hoogte-volumebalans Past de volumebalans in de hoogte aan met de voor-aanwezigheidsluidsprekers. Een hogere waarde versterkt de bovenkant en een lagere waarde versterkt de onderkant. Deze instelling werkt als “All-Channel Stereo” is geselecteerd bij de geluidsprogramma's.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van Monaural Mix (monoweergave) Produceert gemenge monoweergave. Deze instelling werkt als “All-Channel Stereo” is geselecteerd bij de geluidsprogramma's. Instelmenu (Setup) “Sound” > “All-Channel Stereo” > “Monaural Mix” Instellingen Off Schakelt monoweergave uit. On Schakelt monoweergave in. Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de aanpassingsmethode voor de functie Lipsync Selecteert de methode om de vertraging tussen de weergegeven video en audio aan te passen (Lipsync). Instelmenu (Setup) “Sound” > “Lipsync” > “Select” Instellingen Manual Past de vertraging tussen video- en audioweergave handmatig aan. De instelling bij “Adjustment” wordt toegepast op de timing van de audioweergave. Past de vertraging tussen video- en audioweergave automatisch aan.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van de vertraging voor de functie Lipsync Past de vertraging tussen video- en audioweergave (Lipsync) handmatig aan. Instelmenu (Setup) “Sound” > “Lipsync” > “Adjustment” Instelbereik 0 ms t/m 500 ms OPMERKING U kunt de timing van de audioweergave nauwkeurig afstemmen wanneer “Select” in het menu “Setup” is ingesteld op “Auto”. Gerelateerde links ( ( “Instellen van de aanpassingsmethode voor de functie Lipsync” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van het volume van dialooggeluid Past het volume van gesproken tekst aan wanneer dit bijna niet te verstaan is. Een hogere waarde versterkt gesproken tekst. Instelmenu (Setup) “Sound” > “Dialogue” > “Dialogue Level” Instelbereik 0 tot 3 Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van het volume van dialooggeluid bij weergave van DTS:X™-materiaal Past het volume van gesproken tekst aan wanneer dit bijna niet te verstaan is bij weergave van DTSmateriaal. Een hogere waarde versterkt gesproken tekst.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van de waargenomen hoogte van dialooggeluid Past de waargenomen hoogte van gesproken tekst aan wanneer de positie (hoogte) van het dialooggeluid kunstmatig klinkt. Een grotere ingestelde waarde zorgt voor een hogere positionering. Als het lijkt of het dialooggeluid van onder het tv-scherm komt, kunt u de waargenomen hoogte verhogen door deze instelling te verhogen.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de instelmethode voor het dynamische bereik Selecteert de instelmethode voor het dynamische bereik (van maximum tot minimum) voor weergave Dolby Digital en DTS-signalen. Instelmenu (Setup) “Sound” > “Volume” > “Dynamic Range” Instellingen Maximum Produceert audio met afstellen van het dynamische bereik. Standard Optimaliseert het dynamische bereik voor normaal thuisgebruik.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de limietwaarde voor het volume Stelt de limietwaarde in voor het volume wanneer dit wordt ingesteld met bijvoorbeeld de VOLUME-toetsen op de afstandsbediening. Instelmenu (Setup) “Sound” > “Volume” > “Max Volume” Instelbereik -60,0 dB tot +15,0 dB, +16,5 dB [20,5 tot 95,5, 97,0] Gerelateerde links ( ( “Instellen van de schaal van het volumedisplay” (p. 255) “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het volume dat wordt gebruikt bij het inschakelen van het toestel Stelt het beginvolume in dat wordt gebruikt bij het inschakelen van het toestel. Instelmenu (Setup) “Sound” > “Volume” > “Initial Volume” Instellingen Stelt het volumeniveau in op het niveau dat was ingesteld op het moment dat het toestel in de stand-bymodus werd gezet. Off Mute On -80,0 dB tot +16,5 dB [0,5 tot 97,0] Dempt de audioweergave.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de Virtual Surround Back Speaker (VSBS) Selecteert of er een Virtual Surround Back Speaker (VSBS) moet worden gecreëerd. Als VSBS is ingeschakeld, creëert het toestel een VSBS met de surroundluidsprekers, ook als er geen surround-achterluidsprekers zijn aangesloten. Instelmenu (Setup) “Sound” > “Virtual Speaker” > “VSBS” Instellingen Off Creëert geen Virtual Surround Back Speaker (VSBS).
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van Dolby Speaker Virtualization Selecteert of Dolby Speaker Virtualization moet worden toegepast om een virtuele luidspreker te creëren die geoptimaliseerd is voor de weergave van Dolby materiaal. Dolby Speaker Virtualization is effectiever met de Dolby Surround decoder. Instelmenu (Setup) “Sound” > “Virtual Speaker” > “Dolby SP Virtual” Instellingen Off Schakelt Dolby Speaker Virtualization uit.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de DTS-formaat notificatie Geeft de BD-speler de informatie over de DTS-formaten die door het toestel worden ondersteund. Instelmenu (Setup) “Sound” > “DTS Mode” Instellingen Mode 1 Mode 2 Voldoet aan de DTS:X-norm. Deze instelling wordt normaal gesproken gebruikt. Deze instelling wordt gebruikt als de BD-speler geen correct DTS-signaal produceert, ook al wordt er wel DTS-HD of DTS:X-materiaal afgespeeld.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Configureren van de scène-instellingen Selecteren van de onderdelen die u als scènetoewijzingen wilt opnemen Hiermee selecteert u de onderdelen die u als de scènetoewijzingen wilt opnemen. Instelmenu (Setup) “Scene” > “Scene Setting” 1 2 Selecteer de naam van de SCENE en druk op ENTER. Selecteer een item en schakel tussen “Enable” en “Disable”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Onderdeel Inbegrepen functie Pagina Dialogue Lift 223 Dialogue Level 221 Subwoofer Trim 164 Volume Master Volume 117 Lipsync Lipsync 165 Speaker Setup Equalizer 197 Vermogen in de zone 151 Ingang in de zone 152 Volume in de zone 152 Surround Zone Interlock OPMERKING ( ( Selecteer “Reset” en druk op ENTER om de standaardinstellingen voor de geselecteerde scène te herstellen.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Veranderen van de naam van een SCENE Verandert de naam van de SCENE die wordt weergegeven op het display op het voorpaneel of op de tv. Instelmenu (Setup) “Scene” > “Scene Rename” 1 Selecteer de nama van de SCENE en druk op ENTER om het bewerkingsscherm voor de naam te openen. 2 Verander de naam. 3 4 Selecteer “OK”. Druk op SETUP. Hiermee zijn de instellingen voltooid. OPMERKING ( ( Selecteer “CLEAR” om de invoer te wissen.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Configureren van de multizone-instellingen Controleren van de informatie voor de zone Geeft informatie weer over de zone.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van volumeaanpassingen voor weergave in de zone Schakelt volumeaanpassingen in voor weergave in de zone. Als u een externe versterker met eigen volumeregeling hebt aangesloten op het toestel, moet u deze functie instellen op “Fixed”. Instelmenu (Setup) “Multi Zone” > (zone) > “Volume” > “Volume” Instellingen Fixed Schakelt volumeaanpassingen uit voor weergave in de zone.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de bovenlimiet voor het volume in de zone Stelt de bovenlimiet in voor het volume in de zone wanneer dit wordt ingesteld met bijvoorbeeld de VOLUME-toetsen op de afstandsbediening. Instelmenu (Setup) “Multi Zone” > (zone) > “Volume” > “Max Volume” Instelbereik -60,0 dB t/m +10,0 dB [20,5 t/m 90,5] OPMERKING Deze instelling is alleen beschikbaar als “Volume” is ingesteld op “Variable”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het volume dat wordt gebruikt in de zone bij het inschakelen van het toestel Stelt het volume in de zone in dat wordt gebruikt bij het inschakelen van het toestel. Instelmenu (Setup) “Multi Zone” > (zone) > “Volume” > “Initial Volume” Instellingen Stelt het volume in op het niveau dat was ingesteld op het moment dat de stand-bymodus werd ingesteld. Off Mute On -80,0 dB tot +10,0 dB [0,5 tot 90,5] Dempt de audioweergave.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van de volumebalans voor weergave in de zone Past de volumebalans aan voor weergave in de zone Een hogere waarde versterkt het volume aan de rechterkant en een lagere waarde versterkt het volume aan de linkerkant. Instelmenu (Setup) “Multi Zone” > (zone) > “Volume” > “Left / Right Balance” Instelbereik -20 tot +20 Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van monoweergave voor weergave in de zone Selecteert of monoweergave moet worden gebruikt voor weergave in de zone. Instelmenu (Setup) “Multi Zone” > (zone) > “Sound Mode” > “Monaural” Instellingen Off Produceert geen monoweergave in de zone. On Produceert monoweergave in de zone. Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van Compressed Music Enhancer voor weergave in de zone Stelt Compressed Music Enhancer in voor weergave in de zone. U kunt ook ENHANCER op de afstandsbediening gebruiken. Instelmenu (Setup) “Multi Zone” > (zone) > “Sound Mode” > “Enhancer” Instellingen Off Schakelt Compressed Music Enhancer uit. On Schakelt Compressed Music Enhancer in. Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van Extra Bass voor weergave in de zone Schakelt Extra Bass in voor weergave in de zone. Als Extra Bass is ingeschakeld, kunt u genieten van voldoende lage tonen, ongeacht de afmetingen van de luidsprekers. Instelmenu (Setup) “Multi Zone” > (zone) > “Sound Mode” > “Extra Bass” Instellingen Off Schakelt Extra Bass uit. On Schakelt Extra Bass in. Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van de toon voor weergave in de zone Hiermee past u het niveau van het bereik van de hoge tonen (Treble) en dat van de lage tonen (Bass) aan voor weergave in de zone. Instelmenu (Setup) “Multi Zone” > (zone) > “Tone Control” > “Tone Control” Instellingen Auto Manual Bypass Past automatisch de niveaus aan van Treble en Bass aan de hand van het hoofdvolume. Past het niveau van Treble en Bass handmatig aan.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van de tijdafwijking ten opzichte van de hoofdzone Regelt de tijdafwijking (Audio Delay) ten opzichte van de hoofdzone. Instelmenu (Setup) “Multi Zone” > (zone) > “Audio Delay” > “Audio Delay” Instelbereik 0 ms t/m 100 ms Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van omschakelen naar de partymodus in de zone Schakelt het omschakelen naar de partymodus in. Instelmenu (Setup) “Multi Zone” > “Party Mode Set” > (doelzone) Instellingen Disable Enable Schakelt het omschakelen naar de partymodus uit. Schakelt het omschakelen naar de partymodus in. U kunt de partymodus in-/uitschakelen door op de afstandsbediening op PARTY te drukken.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Veranderen van de naam van de zone Verandert de zonenaam die wordt weergegeven op de tv. Instelmenu (Setup) “Multi Zone” > “Zone Rename” 1 Selecteert de zone die u een nieuwe naam wilt geven. De cursor gaat nu naar het bewerkingsscherm voor de naam. 2 Verander de naam. 3 4 Selecteer “OK”. Druk op SETUP. OPMERKING ( ( Selecteer “CLEAR” om de invoer te wissen. Als u de standaardnaam wilt herstellen, selecteert u “RESET”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Configureren van de functie-instellingen Automatisch instellen van de namen van de signaalbronnen Stelt automatisch de namen van de signaalbronnen in aan de hand van de aangesloten externe apparatuur. De naam wordt alleen automatisch aangemaakt wanneer het toestel de informatie over het aangesloten externe apparaat kan verkrijgen van de signaalbron (zoals HDMI).
INSTELLINGEN > Verschillende functies configureren (menu Setup) Handmatig instellen van de namen van de signaalbronnen Stelt de namen van de signaalbronnen handmatig in. Instelmenu (Setup) “Function” > “Input Setting” > “Input Rename” > (ingang) 1 2 3 4 5 6 7 Selecteer u de signaalbron die u een nieuwe naam wilt geven. Selecteer “Manual”. Druk op ENTER. Verander de naam. Selecteer “OK”. Als u de naam van een andere signaalbron wilt wijzigen, herhaalt u stap 1 tot 5. Druk op SETUP.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van signaalbronnen die moeten worden overgeslagen bij gebruik van de INPUT-toets Stelt in welke signaalbronnen zullen worden overgeslagen bij gebruik van de INPUT-toets. U kunt snel de gewenste signaalbron selecteren door deze functie te gebruiken. Instelmenu (Setup) “Function” > “Input Setting” > “Input Skip” > (ingang) Instellingen Off De geselecteerde signaalbron wordt niet overgeslagen.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de audio-ingangsaansluiting die wordt gebruikt voor tv-audio Selecteert de audio-ingangsaansluiting van het toestel waarop het audio-uitgangssignaal van de TV is aangesloten. Wanneer u de signaalbron voor het toestel overschakelt naar “TV”, zal de audio van de tv als volgt worden weergegeven.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van geluidsprogramma’s die moeten worden overgeslagen bij gebruik van de PROGRAM-toetsen Stelt in welke geluidsprogramma’s zullen worden overgeslagen bij gebruik van de PROGRAM-toetsen. U kunt snel het gewenste geluidsprogramma selecteren door deze functie te gebruiken. Instelmenu (Setup) “Function” > “DSP Skip” Instellingen Off Het geselecteerde geluidsprogramma wordt niet overgeslagen.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Bepalen van de voorwaarden voor de werking van de TRIGGER OUT-aansluiting Bepaalt de voorwaarde voor de TRIGGER OUT-aansluitingsfuncties die de externe apparatuur synchroniseert met het toestel. Instelmenu (Setup) “Function” > “Trigger Output” > “Trigger Mode” Instellingen Power Source Synchroniseert het verzenden/stoppen van het elektronische signaal met de aan/uit-status van de zone die is aangeduid als “Target Zone”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Specificeren van het uitgangsniveau van het elektronische signaal dat wordt overgebracht van elk van de signaalbronnen Bepaalt het uitgangsniveau van het elektronische signaal dat wordt overgebracht van elk van de signaalbronnen wanneer “Trigger Mode” is ingesteld op “Source”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Handmatig omschakelen van het uitgangsniveau voor de elektronische signaaloverdracht Schakelt het uitgangsniveau voor de elektronische signaaloverdracht handmatig om wanneer “Trigger Mode” is ingesteld op “Manual”. Deze instelling kan worden gebruikt om de juiste functie van het externe apparaat dat is aangesloten via de TRIGGER OUT-aansluiting, te bevestigen.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Specificeren van de zone waarmee de TRIGGER OUT-aansluiting synchroon werkt Bepaalt de zone waarmee de TRIGGER OUT-aansluiting synchroon werkt wanneer “Trigger Mode” is ingesteld op “Power” of “Source”. Instelmenu (Setup) “Function” > “Trigger Output” > “Target Zone” Instellingen Main Synchroniseert met de hoofdzone. (zonenaam) Synchroniseert met elk van de zones. All Synchroniseert met de hoofdzone of elk van de zones.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Aanpassen van de helderheid van het display op het voorpaneel Past de helderheid van de volgende onderdelen op het voorpaneel aan. Een hogere waarde maakt het display op het voorpaneel helderder.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de schaal van het volumedisplay Wijzigt de schaal van de volumedisplay. Instelmenu (Setup) “Function” > “User Interface” > “Display Settings” > “Volume” Instellingen dB De “dB” eenheid 0-97 De numerieke waarde (0-97) Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van korte berichten op de tv Selecteert of korte meldingen op het tv-scherm worden weergegeven als het toestel wordt bediend. Instelmenu (Setup) “Function” > “User Interface” > “Display Settings” > “Short Message” Instellingen Off Geeft geen korte meldingen weer. On Geeft korte meldingen weer. Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de positie van korte meldingen Stelt de positie van korte meldingen op het tv-scherm in. Instelmenu (Setup) “Function” > “User Interface” > “Display Settings” > “Position” Instellingen Bottom Korte meldingen worden onderaan het tv-scherm weergegeven. Top Korte meldingen worden bovenaan het tv-scherm weergegeven. OPMERKING Deze instelling is alleen beschikbaar wanneer “Short Message” in het menu “Setup” is ingesteld op “On”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het bedieningsgeluid Selecteert of er een geluidssignaal zal klinken wanneer er een toets op het voorpaneel wordt gebruikt. Instelmenu (Setup) “Function” > “User Interface” > “Touch Sound” Instellingen Off Produceert geen bedieningsgeluid. On Produceert wel bedieningsgeluid. OPMERKING Deze instelling is gekoppeld aan de instelling voor “Touch Sound” in het menu “Front Display”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de functies van de kleurtoetsen op de afstandsbediening Stelt de functies voor de toetsen RED/GREEN/YELLOW/BLUE op de afstandsbediening in. Instelmenu (Setup) “Function” > “User Interface” > “Remote Color Key” Instellingen Default Wijst functies toe van apparaten die zijn aangesloten via een HDMI-kabel. Deze instelling werkt wanneer “HDMI Control” in het menu “Setup” is ingesteld op “On”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Voorkomen dat de instellingen per ongeluk worden gewijzigd Beveiligt de instellingen om onbedoelde veranderingen te voorkomen. Instelmenu (Setup) “Function” > “User Interface” > “Memory Guard” Instellingen Off De instellingen zijn niet beveiligd. Beveiligt de instellingen. On Veranderingen aan de instelling zijn niet mogelijk totdat “Off” wordt geselecteerd. Het vergrendelingspictogram (o) wordt weergegeven op het menuscherm.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de hoeveelheid tijd voor de automatische standbyfunctie Stelt de tijd in voor het automatisch uit (stand-by) schakelen van het toestel. Instelmenu (Setup) “Function” > “ECO” > “Auto Power Standby” Instellingen Off Het toestel wordt niet in de stand-bymodus gezet.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van de eco-modus Vermindert het stroomverbruik van het toestel door de eco-modus in te schakelen. Als deze functie is ingesteld op “On”, moet u het toestel opnieuw opstarten. De nieuwe instelling treedt in werking nadat het toestel opnieuw is opgestart. Instelmenu (Setup) “Function” > “ECO” > “ECO Mode” Instellingen Off On Schakelt de eco-modus uit. Schakelt de eco-modus in.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Veranderen van de instelling van FM/AM-afstemmingsfrequentie. Model voor Azië, Taiwan, Brazilië, Algemeen en Midden en Zuid-Amerika Stelt de instelling van de FM/AM-afstemmingsfrequentie van het toestel in overeenkomstig uw land of regio. Instelmenu (Setup) “Function” > “Tuner” > “Frequency Step” Instellingen FM100/AM10 Past de FM-frequentie aan in stappen van 100 kHz en de AM-frequentie in stappen van 10 kHz.
INSTELLINGEN > Verschillende functies configureren (menu Setup) De standaardinstellingen herstellen Herstelt de standaardinstellingen van het toestel (initialiseren). Instelmenu (Setup) “Function” > “Initialization” Keuzes All Herstelt de standaardinstellingen van het toestel. Network Herstelt de standaardinstellingen van netwerkconfiguraties. 1 2 Selecteer “All” of “Network”. Druk op ENTER om het initialiseren uit te voeren.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Maken van reservekopieën en herstellen van alle instellingen Slaat de instellingen van dit toestel op een USB-flashgeheugen op en herstelt deze weer. Zorg van tevoren voor een geschikt USB-flashgeheugen met een FAT16 of FAT32 bestandsindeling.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Als “Restore Failed” verschijnt op de tv (“Error” op het display op het voorpaneel), moet u het volgende controleren en dan de procedure opnieuw opstarten. Controleer of het bestand is opgeslagen in de rootmap van het USB-flashgeheugen. ( OPMERKING ( ( ( “Restore” kan worden gebruikt nadat er reservekopieën zijn gemaakt van alle instellingen. Schakel het toestel niet uit tijdens het herstelproces.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Updaten van de firmware Werkt de firmware bij. U kunt ook de versie van de firmware en de systeem-ID controleren. Instelmenu (Setup) “Function” > “Firmware Update” Keuzes Network Update Werkt de firmware bij via het netwerk. USB Update Werkt de firmware bij met behulp van een USB-flashgeheugen. OPMERKING ( ( ( ( ( “Network Update” kan niet worden geselecteerd wanneer er een firmware update wordt voorbereid.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Configureren van de netwerkinstellingen Controleren van de netwerkinformatie van het toestel Geeft de netwerkinformatie van het toestel weer.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de methode voor verbinding met het netwerk (via bedrading/draadloos) Selecteert de netwerkverbindingsmethode. Instelmenu (Setup) “Network” > “Network Connection” Keuzes Wired Verbindt het toestel met een netwerk via een netwerkkabel. Wireless(Wi-Fi) Verbindt het toestel met een netwerk via een draadloze router (Wi-Fi). Gerelateerde links ( ( ( “Netwerkverbinding van het toestel” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Automatisch instellen van de netwerkparameters (DHCP) Dtelt de netwerkparameters (zoals het IP-adres, Subnetmasker en de Standaard Gateway) automatisch in met behulp van een DHCP-server. Instelmenu (Setup) “Network” > “IP Address” > “DHCP” Instellingen Off On Er wordt geen DHCP-server gebruikt. U kunt de netwerkparameters handmatig configureren. Maakt gebruik van een DHCP-server. De netwerkparameters worden automatisch geconfigureerd.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Handmatig instellen van de netwerkparameters Stelt de netwerkparameters (zoals het IP-adres, Subnetmasker en de Standaard Gateway) handmatig in. Instelmenu (Setup) “Network” > “IP Address” 1 2 3 4 5 6 Stel “DHCP” in op “Off”. Selecteer een parametertype. Stel de netwerkparameter in. Druk op ENTER. Herhaal de stappen 2 t/m 4 om een andere parameter in te stellen. Druk op SETUP. Hiermee zijn de instellingen voltooid.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van een Digital Media Controller Selecteert of er een Digital Media Controller (DMC) kan worden gebruikt voor het bedienen van de weergave. Als deze functie is ingeschakeld, kunt u de weergave van het toestel bedienen met DMC’s op hetzelfde netwerk. Instelmenu (Setup) “Network” > “DMC Control” Instellingen Disable Weergave kan niet worden bediend met DMC’s. Enable Weergave kan worden bediend met DMC’s.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van de functie Network Standby Selecteert of het toestel kan worden ingeschakeld vanaf andere natwerkapparaten. Instelmenu (Setup) “Network” > “Network Standby” Instellingen Off On Schakelt de netwerk stand-byfunctie uit. Schakelt de netwerk stand-byfunctie in. Het toestel verbruikt meer stroom dan wanneer “Off” is geselecteerd. Schakelt de netwerk stand-byfunctie in.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de netwerknaam van het toestel Bewerkt de naam van het toestel (netwerknaam) zoals die zal worden weergegeven op andere netwerkapparaten. Instelmenu (Setup) “Network” > “Network Name” 1 2 3 4 Druk op ENTER. Verander de naam. Selecteer “OK”. Druk op SETUP. Hiermee zijn de instellingen voltooid. OPMERKING ( ( Selecteer “CLEAR” om de invoer te wissen. Om de standaard netwerknaam te herstellen, selecteert u “RESET”.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van de koppeling van de aan/uit-status van het toestel met MusicCast compatibele apparaten Selecteert of andere apparaten (de slaves) op het netwerk ook zullen worden ingeschakeld wanneer dit toestel (de master) op het MusicCast netwerk aan wordt gezet. Instelmenu (Setup) “Network” > “MusicCast Link Power Interlock” Instellingen Off Schakelt de koppeling van de aan/uit-status van het toestel met MusicCast compatibele apparaten uit.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Configureren van de Bluetooth® instellingen Instellen van het gebruik van Bluetooth® Selecteert of de Bluetooth functie moet worden gebruikt. Instelmenu (Setup) “Bluetooth” > “Bluetooth” Instellingen Off Schakelt de “Bluetooth” functie uit. On Schakelt de “Bluetooth” functie in. Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Verbreken van de verbinding tussen een Bluetooth® apparaat en het toestel Verbreekt de Bluetooth verbinding tussen een Bluetooth apparaat (zoals een smartphone) en het toestel. Selecteer “Disconnect” en druk op ENTER om de Bluetooth verbinding te verbreken. Instelmenu (Setup) “Bluetooth” > “Audio Receive” > “Disconnect” OPMERKING Deze instelling is niet beschikbaar wanneer er geen Bluetooth apparaten verbonden zijn.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van de functie Bluetooth® Standby Selecteert of het toestel kan worden ingeschakeld vanaf Bluetooth apparaten. Als deze functie is ingesteld op “On”, zal het toestel automatisch worden ingeschakeld wanneer er op het Bluetooth apparaat een verbindingshandeling wordt uitgevoerd. Instelmenu (Setup) “Bluetooth” > “Audio Receive” > “Bluetooth Standby” Instellingen Off On Schakelt de Bluetooth stand-byfunctie uit.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Instellen van het gebruik van de overdracht van audio transmission naar een Bluetooth® apparaat Selecteert of audio die wordt weergegeven door het toestel kan worden doorgegeven aan Bluetooth apparaten (zoals luidsprekers en hoofdtelefoons). Instelmenu (Setup) “Bluetooth” > “Audio Send” > “Transmitter” Instellingen Off Schakelt de Bluetooth audiozendfunctie uit. On Schakelt de Bluetooth audiozendfunctie in.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Verbinden van het toestel met een Bluetooth® apparaat dat overgedragen audio kan ontvangen Brengt een verbinding tot stand tussen het toestel en Bluetooth apparaten (zoals luidsprekers en hoofdtelefoons) die de door het toestel overgedragen audio kunnen ontvangen wanneer “Transmitter” is ingesteld op “On” in het menu “Setup”. Instelmenu (Setup) “Bluetooth” > “Audio Send” > “Device Search” 1 2 3 Bevestig de melding en druk op ENTER.
INSTELLINGEN > Verschillende functies configureren (menu Setup) Configureren van de taalinstellingen Instellen van de menutaal Selecteert de taal voor de menu's, zoals het instelmenu Instelmenu (Setup) “Language” Instellingen English Engels 日本語 Japans Français Frans Deutsch Duits Español Spaans Русский Russisch Italiano Italiaans 中文 Chinees Gerelateerde links “Basisbediening van het menu Setup” (p.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Basisbediening van het menu op het display op het voorpaneel Voer de volgende basisprocedure uit om het menu “Front Display” te bedienen. Bedien dit menu op het display op het voorpaneel met de bedieningsorganen op het voorpaneel. 1 Tik op MENU (CONNECT) op het voorpaneel.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Items op het menu op het display op het voorpaneel Gebruik de volgende tabel om de systeeminstellingen van het toestel te configureren.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Aanpassen van de helderheid van het display op het voorpaneel Past de helderheid van de volgende onderdelen op het voorpaneel aan. Een hogere waarde maakt het display op het voorpaneel helderder.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Elke aparte zone aan/uit (standby) zetten Schakelt de zone die u wilt bedienen heen en weer tussen aan en uit (standby). Menu op het display op het voorpaneel “Zone Power” > (zone) Instellingen Off Schakelt de zone uit. On Schakelt de zone in. Gerelateerde links “Basisbediening van het menu op het display op het voorpaneel” (p.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Instellen van het gebruik van het volume op het voorpaneel Selecteert of het volume op het voorpaneel kan worden gebruikt. U kunt de mogelijkheid om het volume op het toestel zelf in te stellen uitschakelen om te voorkomen dat het onverwacht heel hard wordt gezet, bijvoorbeeld door een kind.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Instellen van het gebruik van de signaalbronkeuze op het voorpaneel Selecteert of SELECT/ENTER op het voorpaneel kan worden gebruikt om de signaalbron te selecteren. Menu op het display op het voorpaneel “Settings” > “Function Lock” > “Input Selector Lock” Instellingen Off Schakelt het selecteren van de signaalbron met SELECT/ENTER op het toestel zelf in.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Instellen van het gebruik van de scènetoets op het voorpaneel Selecteert of SCENE (4 cijfers) op het voorpaneel kan worden gebruikt. Menu op het display op het voorpaneel “Settings” > “Function Lock” > “Scene Key Lock” Instellingen Off Schakelt het gebruik van SCENE op het toestel zelf in. On Schakelt het gebruik van SCENE op het toestel zelf uit.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Instellen van het gebruik van het bedieningsgeluid Selecteert of er een geluidssignaal zal klinken wanneer er een toets op het voorpaneel wordt gebruikt. Menu op het display op het voorpaneel “Settings” > “Touch Sound” Instellingen Off Produceert geen bedieningsgeluid. On Produceert wel bedieningsgeluid.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Instellen van het gebruik van de afstandsbediening Selecteert of de afstandsbedieningssensor op het voorpaneel kan worden gebruikt. Menu op het display op het voorpaneel “Settings” > “Remote Sensor” Instellingen Off Hiermee schakelt u de afstandsbedieningssensor uit. On Hiermee schakelt u de afstandsbedieningssensor in.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) De afstandsbedienings-ID selecteren Stelt de afstandsbedienings-ID van het toestel in zodat deze overeenkomt met de ID van de afstandsbediening. Bij gebruik van meerdere Yamaha AV-receivers moet u een unieke afstandsbedienings-ID instellen voor de bijbehorende receiver.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Instellen van informatie-items die moeten worden overgeslagen bij gebruik van SELECT/ENTER Stelt in welke informatie-items zullen worden overgeslagen bij gebruik van SELECT/ENTER. U kunt snel de gewenste informatie selecteren door deze functie te gebruiken om onnodige informatie over te slaan.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) De standaardinstellingen herstellen Herstelt de standaardinstellingen van het toestel (initialiseren). Menu op het display op het voorpaneel “Settings” > “Initialization” Keuzes All Initialization Herstelt de standaardinstellingen van het toestel. Network Initialization Herstelt de standaardinstellingen van netwerkconfiguraties.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Maken van reservekopieën en herstellen van alle instellingen Slaat de instellingen van dit toestel op een USB-flashgeheugen op en herstelt deze weer. Zorg van tevoren voor een geschikt USB-flashgeheugen met een FAT16 of FAT32 bestandsindeling.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) 3 Selecteer “Execute”. Terwijl dit bezig is, zal “Executing” worden weergegeven op het display op het voorpaneel. En “Restore Executing” zal worden weergegeven op de tv. Wanneer dit klaar is, zal de melding “Complete” verschijnen (“Restore Complete” op de tv). Het toestel zal automatisch na een paar seconden opnieuw worden opgestart.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Updaten van de firmware Werkt de firmware bij met extra functies of verbeteringen van het product. Nieuwe firmware kan worden gedownload van onze website. Raadpleeg de bijbehorende informatie bij de updates voor details. Menu op het display op het voorpaneel “Settings” > “Firmware Update” Keuzes Network Update Werkt de firmware bij via het netwerk.
INSTELLINGEN > Configureren van de instellingen van het toestel met het voorpaneel (menu op het display op het voorpaneel) Instellen van het gebruik van de Retail Demo demonstratiestand Selecteert of de Retail Demo demonstratiestand op het display op het voorpaneel kan worden gebruikt. In de Retail Demo demonstratiestand worden de kenmerken van het toestel en de QR-code weergegeven op het display op het voorpaneel.
BIJWERKEN > Bijwerken van de firmware van het toestel BIJWERKEN Bijwerken van de firmware van het toestel Bijwerken van de firmware Wanneer dit nodig is, verschijnt er nieuwe firmware die extra eigenschappen of productverbeteringen bevat. Ga voor meer informatie over de firmware naar de website van Yamaha. De firmware van het toestel kan worden bijgewerkt via het netwerk of met een USB-flashgeheugen.
BIJWERKEN > Bijwerken van de firmware van het toestel De firmware van het toestel bijwerken via het netwerk Wanneer het toestel is verbonden met het internet en er een update voor de firmware beschikbaar is, zal de volgende melding worden weergegeven wanneer er op SETUP wordt gedrukt. U kunt van taal veranderen. Bevestig de melding en start de firmware update via het netwerk. LET OP ( Gebruik het toestel niet en koppel het netsnoer en de netwerkkabel niet los wanneer de firmware wordt bijgewerkt.
BIJWERKEN > Bijwerken van de firmware van het toestel 1 2 Druk niet op ENTER maar op de cursortoets omlaag bij stap 2 hierboven. Druk op het volgende scherm op ENTER. De update van de firmware wordt gereserveerd. Als er een update is gereserveerd, zal het bevestigingsscherm voor het bijwerken van de firmware verschijnen op het display op het voorpaneel wanneer u het toestel uitschakelt. Druk op ENTER op het voorpaneel of op de afstandsbediening om het bijwerken van de firmware te laten beginnen.
BIJWERKEN > Bijwerken van de firmware van het toestel Bijwerken van de firmware met behulp van een USBflashgeheugen Als het toestel niet is verbonden met het internet, of als de snelheid van de internetverbinding laag is, kunt u de firmware update uitvoeren met een USB-flashgeheugen. Ga voor details over downloads en firmware updates naar de website van Yamaha. LET OP ( Gebruik het toestel niet en koppel het netsnoer en de netwerkkabel niet los wanneer de firmware wordt bijgewerkt.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt OPLOSSEN VAN PROBLEMEN Wanneer er een probleem optreedt Controleer bij problemen altijd eerst het volgende: Controleer het volgende wanneer het toestel niet naar behoren functioneert. of de netsnoeren van het toestel, de tv en de weergaveapparaten (zoals BD/DVD-spelers) goed zijn aangesloten op de stopcontacten. Het toestel, de subwoofer, de tv en de weergaveapparaten (zoals BD/DVD-spelers) zijn ingeschakeld.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Problemen met de stroomvoorziening, het systeem, of de afstandsbediening De stroom gaat niet aan ( Het veiligheidscircuit werd 3 keer achter elkaar geactiveerd. Als de stand-byindicator op het toestel knippert wanneer u de stroom probeert in te schakelen, betekent dit dat het niet mogelijk om de stroom in te schakelen vanwege een in werking getreden beveiliging.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt De stroom wordt niet synchroon met de tv ingeschakeld ( De HDMI Control op het toestel is uitgeschakeld. Als het uitschakelen van het toestel ook niet synchroon met de tv gebeurt, moet u de instelling voor HDMI Control op het toestel controleren. Zie voor details over HDMI Control: “Instellen van het gebruik van HDMI Control” (p. 200) ( ( De HDMI Control op de tv is uitgeschakeld.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt De stroom gaat niet uit ( De interne microcomputer blijft hangen door een externe elektrische schok (bijvoorbeeld blikseminslag en ontlading van statische elektriciteit) of door een daling van het voltage van de stroomvoorziening. Houd z (aan/uit) op het voorpaneel minstens 15 seconden ingedrukt om het toestel opnieuw op te starten.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt De stroom van dit toestel wordt onmiddellijk uitgeschakeld (stand-bymodus) ( Het toestel was ingeschakeld terwijl er kortsluiting was in een luidsprekerkabel. Draai de blootliggende draden van elk van de luidsprekerkabels stevig in elkaar en sluit de luidsprekers opnieuw aan op het toestel. Zie voor details: “Aansluiten van een luidspreker” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het toestel wordt automatisch in de stand-bymodus gezet ( De slaaptimer werkte. Zet het toestel aan start de weergave opnieuw. ( De functie voor autostand-by is geactiveerd omdat het toestel gedurende de opgegeven tijdsduur niet is gebruikt. Om de functie voor autostand-by uit te schakelen, moet u “Auto Power Standby” in het menu “Setup” instellen op “Off”.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het toestel reageert niet ( De interne microcomputer blijft hangen door een externe elektrische schok (bijvoorbeeld blikseminslag en ontlading van statische elektriciteit) of door een daling van het voltage van de stroomvoorziening. Houd z (aan/uit) op het voorpaneel minstens 15 seconden ingedrukt om het toestel opnieuw op te starten.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het toestel kan niet worden bediend met de afstandsbediening ( Het apparaat bevindt zich buiten het werkingsbereik. Gebruik de afstandsbediening binnen het werkingsbereik. Zie voor details: “Werkingsbereik van de afstandsbediening” (p. 13) ( ( De batterijen raken leeg. Plaats nieuwe batterijen. ( De sensor van de afstandsbediening van het toestel wordt blootgesteld aan direct zonlicht of sterke verlichting.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Kan de gewenste signaalbron niet selecteren, ook niet door op “INPUT” te drukken ( De functie voor het overslaan van bepaalde signaalbronnen is ingesteld. Stel “Input Skip” voor de gewenste signaalbron via het menu “Setup” in op “Off”. Zie voor details: “Instellen van signaalbronnen die moeten worden overgeslagen bij gebruik van de INPUTtoets” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het apparaat dat is aangesloten op het toestel via HDMI kan niet worden bediend met de RED/GREEN/YELLOW/BLUE toetsen op de afstandsbediening ( Een apparaat dat is aangesloten op het toestel via HDMI biedt geen ondersteuning aan de RED/ GREEN/YELLOW/BLUE-toetsen. Gebruik een apparaat dat wel ondersteuning biedt aan de RED/GREEN/YELLOW/BLUE-toetsen.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het display op het voorpaneel is uit ( De helderheid van het display op het voorpaneel is uitgeschakeld. Stel de “Dimmer” in het menu “Front Display” of “Setup” in op een hogere waarde dan “-5”. Zie voor details: “Aanpassen van de helderheid van het display op het voorpaneel” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Problemen met de audio Geen geluid ( Er is een andere signaalbron geselecteerd. Selecteer een geschikte signaalbron met de signaalbronkeuzetoetsen. Zie voor details: “Basisprocedure voor het weergeven van video en muziek” (p. 117) ( ( Het toestel ontvangt signalen die het niet kan reproduceren. Sommige digitale audio-indelingen kunnen niet op het toestel worden weergegeven.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het volume kan niet worden verhoogd ( Het maximumvolume staat te laag ingesteld. Gebruik “Max Volume” in het menu “Setup” om het maximumvolume aan te passen. Zie voor details: “Instellen van de limietwaarde voor het volume” (p. 225) ( ( Een apparaat dat is aangesloten op de uitgangen van het toestel staat niet aan. Schakel alle apparaten die zijn aangesloten op de uitgangen van het toestel aan.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Er wordt geen geluid weergegeven door een bepaalde luidspreker ( De weergavebron bevat geen signaal voor het kanaal. Om dit te controleren, moet u informatie over het huidige audiosignaal op de tv laten weergeven. Zie voor details: “Controleren van de audiosignaal-informatie” (p. 166) ( ( Het geselecteerde geluidsprogramma/decoder maakt geen gebruik van de luidspreker. Gebruik “Test Tone” in het menu “Setup” om dit te controleren.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Er klinkt geen geluid uit de subwoofer ( De weergavebron bevat geen Low Frequency Effect (LFE) of zeer lage frequentiesignalen. Controleer dit door “Extra Bass” in het menu “Setup” in te stellen op “On” om de lagefrequentiecomponenten van het voorkanaal via de subwoofer weer te geven. Zie voor details: “Instellen van het gebruik van Extra Bass” (p. 193) ( ( Weergave door de subwoofer is uitgeschakeld.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Er komt geen geluid uit het weergaveapparaat dat met HDMI is aangesloten op het toestel ( De tv biedt geen ondersteuning voor HDCP (High-bandwidth Digital Content Protection). Raadpleeg de instructiehandleidingen van de tv en controleer de technische gegevens van de tv. ( Het maximumaantal apparaten dat is aangesloten op de HDMI OUT-aansluiting is overschreden. Koppel enkele HDMI-apparaten los. ( De HDMI-audio-uitgang is ingesteld op “Off”.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Er komt geen geluid uit het weergaveapparaat wanneer HDMI Control wordt gebruikt ( De tv is ingesteld op audioweergave uit de tv-luidsprekers. Verander de instelling voor audioweergave op de tv zo dat de audio van het weergaveapparaat wordt weergegeven via de luidsprekers die op het toestel zijn aangesloten. ( Tv-audio is geselecteerd als de signaalbron. Selecteer een geschikte signaalbron met de signaalkeuzetoetsen.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Er komt geen geluid uit de tv wanneer HDMI Control wordt gebruikt ( De tv is ingesteld op audioweergave uit de tv-luidsprekers. Verander de instelling voor audioweergave op de tv zo dat de tv-audio wordt weergegeven via de luidsprekers die op het toestel zijn aangesloten. ( Een tv die geen eARC/ARC ondersteunt, wordt alleen met een HDMI-kabel aangesloten op het toestel. Gebruik een optisch digitale kabel om een audioaansluiting te maken.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt De audio van een ander apparaat wordt weergegeven wanneer u de signaalbron van het toestel overschakelt naar “TV” ( De functie eARC/ARC wordt niet gebruikt. Er wordt audio weergegeven van de audio-ingangsaansluiting die is geselecteerd bij “TV Audio Input” in het menu “Setup”, behalve wanneer er audio van de tv wordt weergegeven met de functie eARC/ARC. Dit is geen storing.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Alleen de voorluidsprekers produceren geluid bij multikanaalsaudio ( Het momenteel geselecteerde geluidsprogramma is “2ch Stereo”. Selecteer een ander geluidsprogramma dan “2ch Stereo”. Zie voor details: “Genieten van geluidsveldeffecten die geoptimaliseerd zijn voor het type materiaal” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt U hoort ruis of een bromgeluid ( Het toestel staat te dicht bij een ander digitaal apparaat of apparaat met radiofrequentie. Zet het toestel verder bij het apparaat vandaan. ( De kabel die het toestel verbindt met het weergaveapparaat is niet goed. Als er geen probleem is met de verbinding, moet u de kabel vervangen.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het geluid klinkt vervormd ( Een apparaat (zoals een externe eindversterker) dat is aangesloten op de audio-uitgangen van het toestel staat niet aan. Schakel alle apparaten die zijn aangesloten op de audio-uitgangen van het toestel aan. ( Het volume van het toestel is te hoog. Zet het volume lager. Als “ECO Mode” in het menu “Setup” is ingesteld op “On”, moet u dit instellen op “Off”.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Problemen met de video Geen video ( Er is een andere signaalbron geselecteerd op het toestel. Selecteer een geschikte signaalbron met de signaalbronkeuzetoetsen. ( Er is een andere signaalbron geselecteerd op de tv. Stel de signaalbron van de tv in op het videosignaal van het toestel. ( De weergave van videosignalen door het toestel wordt niet ondersteund door de tv. Controleer de videoweergave-instelling van het weergaveapparaat.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Er wordt geen video weergegeven door het weergaveapparaat dat met HDMI is aangesloten op het toestel ( Het ingevoerde videosignaal (resolutie) wordt niet ondersteund door het toestel. Zie om de informatie over het huidige videosignaal (resolutie) en de videosignalen die worden ondersteund door het toestel te controleren: “Controleren van de videosignaal-informatie” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Geen beeld (inhoud vereist een HDCP 1.4/2.3-compatibel HDMIapparaat) van het weergaveapparaat ( De tv (HDMI-ingangsaansluiting) biedt geen ondersteuning aan HDCP 1.4/2.3. Sluit het toestel aan op een tv (HDMI-ingang) die HDCP 1.4/2.3 ondersteunt. (De waarschuwing kan verschijnen op het tv-scherm.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het menu “Option” of “Setup” van het toestel wordt niet weergegeven op de tv ( Er is een andere signaalbron geselecteerd op de tv. Stel de tv-ingang in op het weergeven van video vanuit het toestel (HDMI OUT-aansluiting). ( De functie Pure Direct is ingeschakeld. Druk op PURE DIRECT om de functie Pure Direct uit te schakelen. Zie voor details: “Genieten van weergave met hogere kwaliteit (Pure Direct)” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Problemen met FM/AM-radio FM-radio-ontvangst is zwak of bevat veel ruis ( U ondervindt interferentie doordat hetzelfde signaal op verschillende manieren ontvangen wordt. Pas de hoogte of richting van de FM-antenne aan of plaats de antenne op een andere locatie. ( U bevindt zich te ver van de zender van de FM-zender. Druk op MODE op de afstandsbediening om mono FM-radio-ontvangst te selecteren.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt AM-ontvangst is zwak of bevat veel ruis ( Deze geluiden kunnen het gevolg zijn van TL-verlichting, motoren, thermostaten of andere elektrische apparatuur. Het is moeilijk om ruis helemaal te onderdrukken. Ruis kan worden verminderd door gebruik van een AM-buitenantenne.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Radiozenders kunnen niet automatisch worden geselecteerd ( U bevindt zich te ver van de zender van de FM-zender. Selecteer de zender handmatig. Of gebruik een buitenantenne. Wij raden het gebruik aan van een gevoelige multi-element antenne. Zie voor details over het selecteren van HDMI uitgangssignalen: “Luisteren naar de radio” (p. 125) ( ( Het AM-radiosignaal is zwak. Stem de richting af van de AM-antenne. Selecteer de zender handmatig.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt AM-radiozenders kunnen niet worden ingesteld als voorkeuzezender ( Auto Preset is gebruikt. Auto Preset dient alleen voor het registreren van FM-radiozenders. U moet AM-radiozenders handmatig instellen. Zie voor details: “Een radiozender handmatig registreren” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Radiozenders kunnen niet worden geselecteerd met PRESET ( Er zijn geen radiozenders geregistreerd. Wanneer er geen radiozenders zijn geregistreerd, zal “No Presets” verschijnen op het display op het voorpaneel wanneer u op PRESET drukt. Registreer de radiozender onder het voorkeuzenummer. Zie voor details: “Een radiozender handmatig registreren” (p. 128) U kunt ook FM-radiozenders met sterke signalen automatisch laten voorprogrammeren (Auto Preset).
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Problemen met DAB-radio Geen DAB-radio-ontvangst ( Er is geen eerste scan uitgevoerd. Voer een eerste scan uit om DAB-radio te kunnen ontvangen. Zie voor details: “Het afstemmen van DAB voorbereiden” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Geen DAB-radio-ontvangst, ook niet na uitvoeren van een eerste scan ( Ontvangst van DAB-radio is zwak. Controleer de sterkte van de ontvangst via Tune AID op het display op het voorpaneel en pas de hoogte of richting van de antenne aan, of plaats de antenne op een andere locatie. Zie voor details: “Het afstemmen van DAB voorbereiden” (p. 123) ( ( Er is geen DAB-dekking in uw omgeving. Raadpleeg uw leverancier of WorldDMB online via “http://www.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt DAB-ontvangst is zwak of bevat veel ruis ( U ondervindt interferentie doordat hetzelfde signaal op verschillende manieren ontvangen wordt. Controleer de sterkte van de ontvangst via Tune AID op het display op het voorpaneel en pas de hoogte of richting van de antenne aan, of plaats de antenne op een andere locatie. Zie voor details: “Het afstemmen van DAB voorbereiden” (p. 123) ( ( U bevindt zich te ver van de zender van de DAB-zender.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Er is geen DAB-informatie beschikbaar of de informatie klopt niet ( De geselecteerde DAB-radiozender is mogelijk tijdelijk buiten dienst of levert geen informatie. Neem contact op met de DAB-zender.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Geen DAB-radiogeluid ( De geselecteerde DAB-radiozender is mogelijk tijdelijk buiten dienst. Probeer de zender later opnieuw of selecteer een andere zender.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Problemen met USB Het toestel detecteert het USB-flashgeheugen niet ( Het USB-flashgeheugen is niet goed aangesloten op de USB-aansluiting. Zet het toestel uit, sluit het USB-flashgeheugen opnieuw aan en zet het toestel weer aan. ( Het bestandssysteem van het USB-flashgeheugen is niet FAT16 of FAT32. Gebruik een USB-flashgeheugen met een FAT16 of FAT32 bestandsindeling.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Mappen en bestanden op het USB-flashgeheugen kunnen niet worden weergegeven ( De gegevens op het USB-flashgeheugen zijn beveiligd met de codering. Gebruik een USB-flashgeheugen zonder coderingsfunctie.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt De geregistreerde inhoud op het USB-flashgeheugen kan niet worden opgeroepen met PRESET ( Er is een ander USB-flashgeheugen aangesloten op het toestel dan geregistreerd is. Sluit het USB-flashgeheugen aan dat de geregistreerde inhoud als snelkoppelingen bevat aan op het toestel. ( De geregistreerde inhoud (bestand) is naar een andere locatie verplaatst. Registreer de inhoud opnieuw.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het toestel voert geen doorlopende weergave uit met bestanden op een USB-flashgeheugen ( Wanneer het toestel een aantal bestanden detecteert die niet worden ondersteund tijdens het weergeven, stopt het weergeven automatisch. Sla geen bestanden die niet worden ondersteund (zoals afbeeldingen en verborgen bestanden) in mappen voor weergave. ( Er staan meer dan 500 muziekbestanden in de geselecteerde map.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Problemen met het netwerk De netwerkfunctie werkt niet ( De netwerkparameters (IP-adres enz.) zijn niet correct verkregen. Schakel de DHCP-serverfunctie in op uw router en stel “DHCP” in het menu “Setup” in op “On” op het toestel. Zie voor details: “Automatisch instellen van de netwerkparameters (DHCP)” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het toestel kan geen verbinding maken met het internet via een draadloze router (toegangspunt) ( De draadloze router (toegangspunt) is uitgeschakeld. Schakel de draadloze router in. ( Het toestel en de draadloze router (toegangspunt) zijn te ver van elkaar verwijderd. Plaats het toestel en de draadloze router (toegangspunt) dichter bij elkaar. ( Er is een hindernis tussen het toestel en de draadloze router (toegangspunt).
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Draadloze netwerk is niet gevonden ( Magnetrons of andere draadloze apparaten in uw omgeving kunnen de draadloze communicatie verstoren. Schakel deze apparaten uit of zet het toestel en de draadloze router (toegangspunt) verder uit elkaar. AIs uw draadloze router de 5 GHz band ondersteunt, moet u een nieuwe verbinding tot stand brengen in de 5 GHz band.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het toestel detecteert de mediaserver (pc/NAS) niet ( De instelling voor het delen van media is onjuist. Configureer de instelling voor het delen en selecteer het toestel als een apparaat waarmee muziek kan worden gedeeld. ( Bepaalde beveiligingssoftware op uw mediaserver blokkeert de toegang van het toestel tot uw mediaserver. Controleer de instellingen van de beveiligingssoftware op uw mediaserver.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt De bestanden op de mediaserver (pc/NAS) kunnen niet weergegeven of geopend worden ( De bestanden worden niet ondersteund door het toestel of de mediaserver. Gebruik een bestandsindeling die wordt ondersteund door het toestel en de mediaserver. Zie voor informatie over de bestandsindelingen die door het toestel worden ondersteund: “Ondersteunde bestanden” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt De geregistreerde inhoud op de mediaserver (pc/NAS) kan niet worden opgeroepen met PRESET ( De mediaserver (pc/NAS) staat uit. Zet de mediaserver met de geregistreerde inhoud aan. ( De mediaserver (pc/NAS) is niet verbonden met het netwerk. Controleer de netwerkverbindingen en de instellingen van uw router. ( De geregistreerde inhoud (bestand) is naar een andere locatie verplaatst. Registreer de inhoud opnieuw.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Er kan geen internetradio worden weergegeven ( Het toestel is niet verbonden met het internet. Om een internetradiozender te kunnen gebruiken, moet het toestel verbonden zijn met het internet. Controleer of de netwerkparameters (zoals het IP-adres) correct aan het toestel zijn toegewezen. Zie voor details: “Controleren van de netwerkinformatie van het toestel” (p. 268) ( ( De geselecteerde internetradiozender is tijdelijk niet beschikbaar.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt De iPhone herkent het toestel niet wanneer AirPlay wordt gebruikt ( Het toestel is aangesloten op een meervoudige-SSID-router. Toegang tot de router kan zijn beperkt door de netwerkscheidingsfunctie op de router. Sluit de iPhone aan op de SSID die toegang kan verkrijgen tot het toestel. (Maak verbinding met de primaire SSID bovenaan de lijst.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Er kan geen muziek worden weergegeven met AirPlay ( Het toestel kan de nummers die op de iPhone zijn opgeslagen niet weergeven. Controleer de songdata. Als de nummers niet kunnen worden afgespeeld met de iPhone zelf, is het mogelijk dat de digitale gegevens voor het nummer of de geheugenopslag defect zijn.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt De applicatie voor mobiele apparatuur kan het toestel niet vinden ( Het toestel en het mobiele apparaat zijn niet verbonden met hetzelfde netwerk. Controleer de netwerkverbindingen en de instellingen van uw router en verbindt vervolgens het toestel en uw mobiele apparaat met hetzelfde netwerk. ( Het toestel is aangesloten op een meervoudige-SSID-router. Toegang tot de router kan zijn beperkt door de netwerkscheidingsfunctie op de router.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Het bijwerken van de firmware via het netwerk is mislukt ( Afhankelijk van de kwaliteit van het netwerk kan dit onmogelijk zijn. Werk de firmware nog eens bij via het netwerk, of gebruik een USB-flashgeheugen. Zie voor details: “Updaten van de firmware” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Problemen met Bluetooth® Er kan geen Bluetooth® verbinding tot stand worden gebracht ( De draadloze antennes op het achterpaneel van het toestel staan niet rechtop. Zet de draadloze antennes rechtop om draadloos verbinding te maken met Bluetooth apparatuur. ( De Bluetooth functie van het toestel is uitgeschakeld. Schakel de Bluetooth functie in. Zie voor details: “Instellen van het gebruik van Bluetooth®” (p.
OPLOSSEN VAN PROBLEMEN > Wanneer er een probleem optreedt Er wordt geen geluid geproduceerd of het geluid wordt onderbroken tijdens het afspelen met een Bluetooth® verbinding ( Het volume van het Bluetooth apparaat is te laag ingesteld. Zet het volume van het Bluetooth apparaat hoger. ( Het Bluetooth apparaat is niet ingesteld om audiosignalen naar het toestel te verzenden. Schakel de audiouitgang van het Bluetooth apparaat over naar dit toestel. ( De Bluetooth verbinding is verbroken.
OPLOSSEN VAN PROBLEMEN > Foutberichten op het voorpaneel Foutberichten op het voorpaneel Foutberichten op het voorpaneel Raadpleeg de volgende tabel wanneer er een foutmelding verschijnt op het display op het voorpaneel. Bericht Check SP Wires Oorzaak Oplossing De luidsprekerkabels zijn kortgesloten. Draai de blootliggende draden van de kabels in elkaar en sluit ze correct aan op het toestel en de luidsprekers. Zie voor details: ( “Aansluiten van een luidspreker” (p.
APPENDIX > Onderhoud en reiniging APPENDIX Onderhoud en reiniging Onderhoud van het voorpaneel U dient op de volgende manier voor het voorpaneel te zorgen. Neem het voorpaneel af met een zachte, droge doek. Wrijf niet hard op het oppervlak. Als u zich hier niet aan houdt, dan kan het oppervlak beschadigd raken. Voor u het voorpaneel schoon gaat maken, moet u het toestel uit (standby) zetten.
APPENDIX > Op een draadloos netwerk aansluiten Op een draadloos netwerk aansluiten Selecteren van de netwerkverbindingsmethode Selecteer een draadloze verbindingsmethode in overeenstemming met uw netwerkomgeving. 1 2 3 4 Druk op SETUP. Selecteer “Network”. Selecteer “Network Connection”. Selecteer “Wireless(Wi-Fi)”. De volgende verbindingsmethoden zijn beschikbaar. “Instellen van een draadloze verbinding met de WPS-knop” (p. 358) “Instellen van een draadloze verbinding met een iPhone” (p.
APPENDIX > Op een draadloos netwerk aansluiten Instellen van een draadloze verbinding met de WPS-knop U kunt gemakkelijk een draadloze verbinding instellen door één keer op de WPS-knop van uw draadloze router te drukken. Instelmenu (Setup) “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Selecteer “WPS Button”. Volg de instructies op het scherm om verbinding te maken met het draadloze netwerk. Wanneer de verbindingsprocedure voltooid is, verschijnt “Completed” op de tv.
APPENDIX > Op een draadloos netwerk aansluiten Instellen van een draadloze verbinding met een iPhone U kunt een draadloze verbinding instellen door de instellingen van de verbinding op uw iPhone toe te passen. Controleer voor u verder gaat of uw iPhone verbonden is met een draadloze router. OPMERKING U hebt een iPhone met iOS 7 of hoger nodig. Instelmenu (Setup) “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Selecteer “WAC(iOS)”.
APPENDIX > Op een draadloos netwerk aansluiten Instellen van een draadloze verbinding door te selecteren van een lijst met beschikbare toegangspunten U kunt een draadloze verbinding maken door een toegangspunt te selecteren van een lijst met draadloze LAN-routers die gevonden zijn door het toestel. U moet de beveiligingssleutel met de hand invoeren. Instelmenu (Setup) “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Selecteer “Access Point Scan”.
APPENDIX > Op een draadloos netwerk aansluiten Een draadloze verbinding handmatig configureren U kunt een draadloze verbinding Instellen door de vereiste informatie met de hand in te voeren. U moet de SSID (netwerknaam), versleutelingssmethode en beveiligingssleutel voor uw netwerk instellen. Instelmenu (Setup) “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Selecteer “Manual Setting”. Volg de instructies op het scherm om verbinding te maken met het draadloze netwerk.
APPENDIX > Op een draadloos netwerk aansluiten Instellen van een draadloze verbinding met de WPS PIN-code U kunt een draadloze verbinding maken door de PIN-code van het toestel in te voeren in de draadloze router. De methode is beschikbaar als de draadloze router de WPS-PIN-codemethode ondersteunt. Instelmenu (Setup) “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Selecteer “PIN Code”. Volg de instructies op het scherm om verbinding te maken met het draadloze netwerk.
APPENDIX > Gebruiken van voor-aanwezigheidsluidsprekers Gebruiken van voor-aanwezigheidsluidsprekers Opstelling aanwezigheidsluidsprekers De volgende drie opstellingen zijn mogelijk voor de voor-aanwezigheidsluidsprekers. Kies de opstelling die het best past bij uw luisteromgeving. Front Height Overhead Dolby Enabled SP ( ( ( OPMERKING ( ( U kunt genieten van Dolby Atmos, DTS:X of CINEMA DSP 3D met elk van de opstellingen.
APPENDIX > Gebruiken van voor-aanwezigheidsluidsprekers Installeren van de voor-aanwezigheidsluidsprekers voor en hoog (Front Height) Installeer de voor-aanwezigheidsluidsprekers aan de voorwand (Front Height). Dit zorgt voor een natuurlijk geluidsveld met uitstekende koppeling van de geluidsruimten links, rechts, boven en onder en een effectieve uitbreiding van de geluidsweergave.
APPENDIX > Gebruiken van voor-aanwezigheidsluidsprekers Installeren van de voor-aanwezigheidsluidsprekers aan het plafond (Overhead) Installeer de voor-aanwezigheidsluidsprekers aan het plafond boven de luisterplek (Overhead). Dit zorgt voor realistische geluidseffecten van boven en een geluidsveld met uitstekende koppeling van de geluidsruimten voor en achter.
APPENDIX > Gebruiken van voor-aanwezigheidsluidsprekers Gebruiken van Dolby Enabled-luidsprekers als vooraanwezigheidsluidsprekers Gebruik Dolby Enabled-luidsprekers als voor-aanwezigheidsluidsprekers. Dit maakt gebruik van geluiden die door het plafond worden weerkaatst en laat u van geluid boven het hoofd genieten door alleen gebruik te maken van luidsprekers die op dezelfde hoogte als traditionele luidsprekers zijn geplaatst.
APPENDIX > Ondersteunde apparaten en bestandindelingen Ondersteunde apparaten en bestandindelingen Ondersteunde Bluetooth® apparatuur De volgende Bluetooth apparaten kunnen worden gebruikt door het toestel. Bluetooth apparaten die A2DP ondersteunen kunnen worden gebruikt. Er kan niet worden gegarandeerd dat alle Bluetooth apparaten correct zullen werken.
APPENDIX > Ondersteunde apparaten en bestandindelingen Ondersteunde USB-apparatuur De volgende USB-apparaten kunnen worden gebruikt door het toestel. Dit toestel is geschikt voor USB-geheugenapparaten met FAT16 of FAT32-formattering. Probeer geen andere types USB-apparatuur aan te sluiten. USB-apparaten met versleuteling kunnen niet worden gebruikt. Er kan niet worden gegarandeerd dat alle USB-apparaten correct zullen werken.
APPENDIX > Ondersteunde apparaten en bestandindelingen Ondersteunde bestanden De volgende bestandsindelingen kunnen worden gebruikt door het toestel.
APPENDIX > Zoneweergave Zoneweergave Multizoneweergave Multizoneweergave wordt als volgt getoond.
APPENDIX > Handelsmerken Handelsmerken Handelsmerken De handelsmerken die in deze handleiding worden gebruikt, zijn als volgt. Dolby, Dolby Vision, Dolby Atmos, en het dubbele-D symbool zijn handelsmerken van Dolby Laboratories Licensing Corporation. Gefabriceerd onder licentie van Dolby Laboratories. Vertrouwelijke niet-gepubliceerde werken. Copyright © 2012–2021 Dolby Laboratories. Alle rechten voorbehouden. Zie http://patents.dts.com voor DTS-patenten. Gefabriceerd onder licentie van DTS, Inc.
APPENDIX > Handelsmerken Het Wi-Fi CERTIFIED™ Logo en Wi-Fi Protected Setup Logo geregistreerde handelsmerken van Wi-Fi Alliance®. Wi-Fi, Wi-Fi CERTIFIED, Wi-Fi Protected Setup en WPA2 zijn handelsmerken of geregistreerde handelsmerken van Wi-Fi Alliance®. Het Bluetooth® woordmerk en de logo's zijn gedeponeerde handelsmerken van Bluetooth SIG, Inc. en elk gebruik ervan door Yamaha Corporation geschiedt onder licentie. Het toestel ondersteunt afstemmen op DAB/DAB+.
APPENDIX > Technische gegevens Technische gegevens Technische gegevens De technische gegevens van dit toestel zijn als volgt. Ingangen Analoge audio ( Audio x 4 (inclusief PHONO) Digitale audio ( Optisch x 1 (ondersteunde frequenties: 32 kHz tot 96 kHz) ( Coaxiaal x 1 (ondersteunde frequenties: 32 kHz tot 192 kHz) HDMI-ingang ( HDMI x 7 Andere aansluitingen ( USB x 1 (USB2.
APPENDIX > Technische gegevens Video-indeling (Repeater-modus) ( VGA ( 480i/60 Hz ( 576i/50 Hz ( 480p/60 Hz ( 576p/50 Hz ( 720p/60 Hz, 50 Hz ( 1080i/60 Hz, 50 Hz ( 1080p/120 Hz, 100 Hz, 60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz ( 4K/120 Hz, 100 Hz, 60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz ( 8K/60 Hz (8K60 )*, 50 Hz (8K50 )*, 30 Hz, 25 Hz, 24 Hz B B * Alleen DSC (Display Stream Compression) Het binnenkomende 8K-signaal wordt ondersteund door de HDMI 1-3 aansluitingen.
APPENDIX > Technische gegevens Bluetooth Sink-functie ( Bronapparaat naar AVR (bijv. smartphone/tablet) ( Ondersteund profiel A2DP, AVRCP ( Ondersteunde codecs SBC, AAC ( ( Bronfunctie ( AVR naar sink-apparaat (d.wz. de ontvanger, bijv. Bluetooth hoofdtelefoon) ( Ondersteund profiel A2DP, AVRCP ( Ondersteunde codecs SBC ( Geschikt voor bediening afspelen/stoppen vanaf het sink-apparaat (ontvanger) ( ( Bluetooth-versie ( Ver.4.
APPENDIX > Technische gegevens Post-decoderingsindeling ( Dolby Surround ( DTS Neo: 6 Music, DTS Neo: 6 Cinema ( Neural:X Audiogedeelte Nominaal uitgangsvermogen (2 kanalen) (20 Hz tot 20 kHz, 0,06% THD, 8 Ω) L/R voor, L/R surround, surround achter L/R 100 W/kan. ( ( Midden 100 W (1 kHz, 0,9% THV, 8 Ω) L/R voor, L/R surround, surround achter L/R 105 W/kan.
APPENDIX > Technische gegevens Impedantie hoofdtelefoon 16 Ω of meer Frequentierespons ( AUDIO 3 etc. naar Voor (Pure Direct) (10 Hz t/m 100 kHz) +0/-3 dB RIAA Equalizatie-afwijking ( PHONO (20 Hz t/m 20 kHz) 0±0,5 dB Totale Harmonische Vervorming ( PHONO naar PRE OUT (Pure Direct) (1 kHz, 1 V) 0,02% of minder ( AUDIO 3 enz.
APPENDIX > Technische gegevens FM-gedeelte Afstembereik ( ( ( [Modellen voor de V.S. en Canada] 87,5 MHz tot 107,9 MHz [Modellen voor Azië, Taiwan, Brazilië, Midden en ZuidAmerika en algemene modellen] 87,5/87,50 MHz tot 108,0/108,00 MHz [Overige modellen] 87,50 MHz tot 108,00 MHz 50 dB Rustgevoeligheid (IHF, 1 kHz, 100% MOD.
APPENDIX > Technische gegevens Algemeen Stroomvoorziening ( ( [Modellen voor de V.S. en Canada] 120 V, 60 Hz wisselstroom [Modellen voor Taiwan, Brazilië en Midden en ZuidAmerika] 110 tot 120 V, 60 Hz wisselstroom ( [Modellen voor China] 220 V, 50 Hz wisselstroom ( [Modellen voor Korea] 220 V, 60 Hz wisselstroom ( [Modellen voor Australië] 240 V, 50 Hz wisselstroom ( [Modellen voor het V.K.
APPENDIX > Standaardinstellingen Standaardinstellingen Standaardinstellingen van het menu Option De standaardinstellingen van het menu “Option” zijn als volgt.
APPENDIX > Standaardinstellingen Standaardinstellingen van het menu Setup De standaardinstellingen van het menu “Setup” zijn als volgt.
APPENDIX > Standaardinstellingen HDMI Video Format ( HDMI 1-7 4K Mode 1 Sound Treble, Bass Bypass (0,0 dB) Tone Control * Wanneer zowel “Treble” en “Bass” 0,0 dB zijn, zal “Bypass” verschijnen.
APPENDIX > Standaardinstellingen Scene Rename - Multi Zone Information - Zone2 ( ( Volume ( Volume Variable ( Max Volume +10,0 dB ( Initial Volume ( Left / Right Balance Off 0 Sound Mode ( Monaural ( Enhancer Off On ( Extra Bass Off ( Tone Control Auto ( Audio Delay 0 ms Party Mode Set ( Zone2 Enable Zone Rename ( Main Zone - ( Zone2 - Function Input Setting ( Input Rename ( HDMI 1-7 ( Overige ( Input Skip ( TV Audio Input Auto Manual Off AUDIO 1 DSP Skip O
APPENDIX > Standaardinstellingen User Interface ( Display Settings ( Dimmer -2 ( Volume dB ( Short Message ( Position ( Touch Sound ( Remote Color Key ( Memory Guard On Bottom On Default Off ECO ( Auto Power Standby ( ECO Mode 20 minutes Off Tuner FM50/AM9 (Alleen modellen voor Azië, Taiwan, Brazilië, algemene modellen en modellen voor Midden en Zuid-Amerika) Initialization - Backup/Restore - Firmware Update - Network Information - Network Connection Wired IP Address ( DH
APPENDIX > Standaardinstellingen Audio Send ( Transmitter ( Device Search Off - Language English 385
APPENDIX > Standaardinstellingen Standaardinstellingen van het menu op het display op het voorpaneel De standaardinstellingen van het menu “Front Display” zijn als volgt.
Layout Folder: YMH_PDF_Manual_A5_AV Stylesheet Name: 01_YMH_PDF_Manual_A5_AV_En-Multi Stylesheet Version: 2021.11.08 Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.