User Guide AV Receiver EN
CONTENTS CONTENTS BEFORE USING THE UNIT 9 Read me first............................................................................................ 9 How to use this guide............................................................................................................................................................... 9 Glossary.. .....................................................................................................................................................................
CONTENTS Connecting speakers................................................................................ 63 Speaker requirements.. ........................................................................................................................................................... 63 Cable requirements.................................................................................................................................................................. 64 How to connect speakers.. .......
CONTENTS ENJOYING SOUND 101 Enjoying sound field effects.. .................................................................. 101 Selecting your favorite sound mode.. ................................................................................................................................... 101 Enjoying 3-dimentional sound fields.. ..................................................................................................................................
CONTENTS Playing back music with the Bluetooth® connection.. ................................. 133 Playback of Bluetooth® device music on the unit.. .............................................................................................................. 133 Playback of music using Bluetooth® speakers/headphones.. ............................................................................................. 134 Playing back music with AirPlay.. .........................................................
CONTENTS CONFIGURATIONS 156 Configuring the unit............................................................................... 156 Using the menu.. .................................................................................................................................................................... 156 Configuring playback settings for different playback sources (Option menu)..157 Basic operation of the Option menu.. .........................................................................
CONTENTS Configuring the unit’s settings by operation of the body front panel (Front Display menu)....................................................................................... 281 Basic operation of the Front Display menu.. ........................................................................................................................ 281 Front Display menu items................................................................................................................................
CONTENTS APPENDIX 355 Care and cleaning.. ................................................................................ 355 Care for the front panel.......................................................................................................................................................... 355 Connecting to a network wirelessly.......................................................... 356 Selecting a wireless network connection method.. ....................................................
BEFORE USING THE UNIT > Read me first BEFORE USING THE UNIT Read me first How to use this guide Thank you very much for purchasing a Yamaha product. ( This unit is a product for enjoying video and music at home. ( This guide explains preparations and operations for everyday users of the unit. ( To use the unit safely and correctly, be sure to read this guide carefully before using it. When reading this guide, mind the following items.
BEFORE USING THE UNIT > Read me first Glossary For a glossary of terms used in this guide, refer to the site below. There are explanations of terms and technologies for this product and also for Yamaha AV products in general. https://manual.yamaha.
BEFORE USING THE UNIT > Checking the accessories Checking the accessories Checking the accessories Check that the following accessories are supplied with the product. £ AM antenna (Except for U.K., Europe, Russia and Australia models) £ FM antenna (Except for U.K., Europe, Russia and Australia models) * One of the above is supplied depending on the region of purchase. £ DAB/FM antenna (U.K.
BEFORE USING THE UNIT > Using the remote control Using the remote control Insert the batteries in the remote control Insert the batteries the right way round.
BEFORE USING THE UNIT > Using the remote control Operating range of the remote control The operating range of the remote control is shown in the following figure. Point the remote control at the remote control sensor on the unit.
FEATURES > What you can do with the unit FEATURES What you can do with the unit Supporting various speaker system According to the number of speakers that you are using, you can enjoy your favorite acoustic spaces in various styles. ( 7.1/5.1.2-channel system ( 5.1.2-channel system ( 7.1-channel system ( 5.1-channel system ( 3.1.2-channel system ( 3.1-channel system ( 2.
FEATURES > What you can do with the unit Automatically optimizing the speaker settings YPAO function detects speaker connections, measures the distances from them to your listening positions (measuring positions) by using YPAO microphone measurement, and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room (YPAO: Yamaha Parametric room Acoustic Optimizer). ( “Flow of the speaker configurations” (p.
FEATURES > What you can do with the unit Enjoying sound field effects with much presence The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). ( “Enjoying 3-dimentional sound fields” (p.102) ( “Enjoying sound field effects optimized for the type of content” (p.103) ( “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.
FEATURES > What you can do with the unit Wide variety of supported content via network When the unit is connected to a network, you can enjoy the various kinds of content via network on the unit. ( “Playback of music with AirPlay” (p.135) ( “Playback of music media servers (PCs/NAS)” (p.138) ( “Selecting an Internet radio station” (p.139) ( “Listening to a music streaming service” (p.
FEATURES > What you can do with the unit Playing back content of various devices A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), Bluetooth devices (such as smartphones), game consoles, USB flash drives, and other devices. You can play back content of them or tune in to a radio station. ( “Listening to the radio” (p.127) ( “Playback of Bluetooth® device music on the unit” (p.
FEATURES > What you can do with the unit Useful functions The unit is equipped with the various useful functions. The SCENE function allows you to select the input source and settings registered to the corresponding scene, such as sound program and Compressed Music Enhancer on/off, with just one touch. You can recall the registered content (such as music stored on media servers and Internet radio stations) by selecting the shortcut number.
FEATURES > What you can do with the unit Supporting wireless speakers The unit is equipped with the function connected with speakers wirelessly. You can enjoy audio played back on the unit using Bluetooth speakers/headphones. Also, using devices that support the MusicCast Surround function, the surround speakers and subwoofer can be wireless. ( “Playback of music using Bluetooth® speakers/headphones” (p.134) ( “Configuring wireless speakers” (p.
FEATURES > Useful applications Useful applications AV SETUP GUIDE AV SETUP GUIDE is an application that assists you with cable connections between AV Receiver and playback devices as well as AV Receiver setup. This app guides you through the various settings such as speaker connections, TV and playback device connections and selecting the speaker system. For details, search for “AV SETUP GUIDE” on the App Store or Google Play.
FEATURES > Useful applications MusicCast CONTROLLER MusicCast CONTROLLER is an application that allows you to link a MusicCast compatible device to other MusicCast compatible devices in other rooms and play them back simultaneously. This app lets you use your smartphone or other mobile device instead of the remote control to easily select music to play back as well as configure the unit and MusicCast compatible devices. For details, search for “MusicCast CONTROLLER” on the App Store or Google Play.
PART NAMES AND FUNCTIONS > Unit body PART NAMES AND FUNCTIONS Unit body Part names and functions of the front panel The part names and functions of the front panel are as follows. a b c d e f SELECT/ENTER SCENE ZONE USB YPAO PHONES i j 1 PURE DIRECT 2 3 4 RETURN MENU (CONNECT) 5V 1A g a h k z (power) Turns on/off (standby) the Main zone (p.82). b Remote control sensor Receives remote control signals (infrared) (p.13). c Indicator Lights up under the following condition.
PART NAMES AND FUNCTIONS > Unit body f SELECT/ENTER Selects the input source and operates the front display. g Standby indicator Lights up when the unit is in standby mode under any of the following conditions. h ( HDMI Control is enabled (p.201) ( Standby Through is enabled (p.203) ( Network Standby is enabled (p.272) ( Bluetooth Standby is enabled (p.277) USB jack For connecting a USB flash device (p.136). i YPAO jack For connecting the supplied YPAO microphone (p.89).
PART NAMES AND FUNCTIONS > Unit body Front display Part names and functions of the front display The part names and functions of the front display are as follows. a g a c b d e f h Operation mode icon Indicates the current mode of the front display (the input select mode or the info select mode). b Input default name Displays the default name when you have renamed the input source name.
PART NAMES AND FUNCTIONS > Unit body f Volume Indicates the current volume. g SELECT/ENTER indicator Indicates the available SELECT/ENTER status (push or rotate) for the right display area. h Additional information Displays the additional information of the current input such as Reception, DSP Program.
PART NAMES AND FUNCTIONS > Unit body Selecting the input information displayed on the front display The front display in the info select mode displays additional information related to the input source on the front display. Item Push SELECT/ENTER on the front panel to switch the front display to the info select mode. And rotate SELECT/ENTER to select between the various items. The additional information is displayed under the item. a b Displayed items vary depending on the input source.
PART NAMES AND FUNCTIONS > Unit body Currently input source Displayed item music streaming services (with playback information) Song, Artist, Album, IP Address, Ethernet MAC Address, Wi-Fi MAC Address, DSP Program, Audio Decoder, Output Channel, HDMI Status, System Status AirPlay music streaming services (without playback information) Alexa DSP Program, Audio Decoder, Output Channel, HDMI Status, System Status, IP Address, Ethernet MAC Address, Wi-Fi MAC Address MusicCast Link Bluetooth Song, Artist,
PART NAMES AND FUNCTIONS > Unit body 29
PART NAMES AND FUNCTIONS > Unit body Part names and functions of the rear panel The part names and functions of the rear panel are as follows. a f g h HDMI TRIGGER OUT 12V de bc HDMI OUT 0.
PART NAMES AND FUNCTIONS > Unit body i ANTENNA jacks For connecting to the radio antennas (p.72). j Power cable For connecting to an AC wall outlet (p.81). k AUDIO 1-5 jacks For connecting to audio playback devices and inputting audio signals (p.71). l SPEAKERS terminals For connecting to speakers (p.35).
PART NAMES AND FUNCTIONS > Remote control Remote control Part names and functions of the remote control The part names and functions of the supplied remote control are as follows. a b c d MAIN ZONE 2 SLEEP SCENE e 1 3 2 4 STRAIGHT PURE DIRECT ENHANCER SUR.
PART NAMES AND FUNCTIONS > Remote control a Remote control signal transmitter Transmits remote control signals (infrared). b z (power) key Turns on/off the zone selected by zone switch (p.152). c SLEEP key Sets the time of the sleep timer (p.141). d Zone switch Changes the zone that is controlled by the remote control (p.153). e SCENE keys Switches with one touch between multiple settings set using the SCENE function. Also, turn on the unit when it is in standby mode (p.142).
PART NAMES AND FUNCTIONS > Remote control o MUTE key Mutes the audio output. p OPTION key Displays the Option menu operated on the TV (p.157). q DISPLAY key Turns on/off the browse screen, playback screen, etc.
PREPARATIONS > Before starting PREPARATIONS Before starting Names and functions of speakers The names and functions of speakers connected to the unit are as follows. E0.5 to 1 m (1.6 0.5 to 1 m (1.6 to 3.3 ft) to 3.3 ft) 1 1.8 m (5.9 ft) 2 3 9 R 1.8 m (5.9 ft) 9 4 5 10° to 30° 10° to 30° 6 7 0.3 m (1 ft) or more Speaker type Front Center Abbr. 1/2 3 Function Produces front channel sounds (stereo sounds). Produces center channel sounds (such as movie dialogue and vocals).
PREPARATIONS > Before starting Related links ( ( ( “Flow of preparations (with surround speakers connected by speaker cables)” (p.37) “Flow of preparations (with surround speakers wirelessly connected)” (p.38) “Front presence speaker layout” (p.
PREPARATIONS > Before starting Flow of preparations Flow of preparations (with surround speakers connected by speaker cables) Basic flow of preparations for using the unit is as follows. 1 2 3 4 5 6 7 8 9 Place speakers. Connect speakers. Connect a TV. Connect playback devices. Connect the radio antennas. Prepare for connecting to a network. Set MusicCast network. Assign speaker configuration. Configure the speaker settings. Related links “How to place speakers (speaker systems)” (p.
PREPARATIONS > Before starting Flow of preparations (with surround speakers wirelessly connected) Basic flow of preparations for using the unit with surround speakers wirelessly connected is as follows. 1 2 3 4 5 6 7 8 9 10 Place speakers. Connect speakers. Connect a TV. Connect playback devices. Connect the radio antennas. Prepare for connecting to a network. Set MusicCast network. Connect wireless speakers. Assign speaker configuration. Configure the speaker settings.
PREPARATIONS > How to place speakers (speaker systems) How to place speakers (speaker systems) Speaker systems recommended to the unit (basic setup) This speaker system brings out the full performance of the unit. You can enjoy a highly-natural 3-dimensional sound field with any content. We recommend this speaker system for Dolby Atmos or DTS:X content. [Search tag]#Q01 Speaker systems n 7.1/5.1.2-channel system 0.5 to 1 m (1.6 to 3.3 ft) 0.5 to 1 m (1.6 to 3.3 ft) 1 1.8 m (5.9 ft) 9 R 2 3 1.
PREPARATIONS > How to place speakers (speaker systems) AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 5 4 3 2 1 76 RE 9 9 NOTE ( ( ( ( The surround back speakers and front presence speakers do not produce sounds simultaneously.
PREPARATIONS > How to place speakers (speaker systems) Other speaker systems (basic setup) 5.1.2-channel system To have a full effect of Dolby Atmos or DTS:X content, we recommend this speaker system. The front presence speakers produce a natural 3-dimensional surround field including overhead. [Search tag]#Q01 Speaker systems n For layout with front presence speakers in Front Height position E 0.5 to 1 m (1.6 0.5 to 1 m (1.6 to 3.3 ft) to 3.3 ft) 1 1.8 m (5.9 ft) 9 R 2 3 1.8 m (5.
PREPARATIONS > How to place speakers (speaker systems) n For layout with front presence speakers in Overhead position E R 1 2 3 9 9 4 5 10° to 30° 10° to 30° AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F.
PREPARATIONS > How to place speakers (speaker systems) NOTE ( ( ( When installing the front presence speakers on the ceiling above the listening position, or when using Dolby Enabled speakers as the front presence speakers, the front presence speaker layout settings must be changed. You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the same sounds. When using only one subwoofer, you can place it either in the left or right side.
PREPARATIONS > How to place speakers (speaker systems) 7.1-channel system This speaker system allows you to enjoy extended surround sound using the surround back speakers. [Search tag]#Q01 Speaker systems 1 9 2 3 9 4 5 10° to 30° 10° to 30° 6 7 0.
PREPARATIONS > How to place speakers (speaker systems) AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 5 4 3 2 1 76 9 9 NOTE ( ( You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the same sounds.
PREPARATIONS > How to place speakers (speaker systems) 5.1-channel system This is a basic speaker layout recommended for enjoying surround sound.
PREPARATIONS > How to place speakers (speaker systems) AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 9 9 54 3 21 NOTE ( ( You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the same sounds.
PREPARATIONS > How to place speakers (speaker systems) 3.1.2-channel system We recommend this speaker layout when you cannot place speakers in the back of the room. You can also enjoy Dolby Atmos or DTS:X content with this speaker system. [Search tag]#Q01 Speaker systems E 0.5 to 1 m (1.6 0.5 to 1 m (1.6 to 3.3 ft) to 3.3 ft) 1 1.8 m (5.9 ft) 9 R 2 3 48 1.8 m (5.
PREPARATIONS > How to place speakers (speaker systems) AUDIO 1 AUDIO 3 AUDIO 2 (7 TV) AUDIO 4 AUDIO 5 PHONO ZONE OUT ZONE 2 (3 MUSIC) OPTICAL COAXIAL PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F.
PREPARATIONS > How to place speakers (speaker systems) 3.1-channel system This is a speaker layout recommended for enjoying stereo sound with a center speaker. Center channel sound such as movie dialogue and vocals can be clearly obtained.
PREPARATIONS > How to place speakers (speaker systems) AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL PHONO ZONE OUT ZONE 2 PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 321 9 NOTE ( ( You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the same sounds.
PREPARATIONS > How to place speakers (speaker systems) 2.1-channel system This is a speaker layout recommended for enjoying stereo sound.
PREPARATIONS > How to place speakers (speaker systems) AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 9 21 NOTE ( ( You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the same sounds.
PREPARATIONS > How to place speakers (speaker systems) Virtual CINEMA FRONT This speaker layout is recommended if you cannot place speakers in the back of the room.
PREPARATIONS > How to place speakers (speaker systems) AUDIO 1 AUDIO 3 AUDIO 2 (7 TV) AUDIO 4 AUDIO 5 PHONO ZONE OUT ZONE 2 (3 MUSIC) OPTICAL COAXIAL PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F. PRESENCE /ZONE 2 54 3 21 9 NOTE ( ( ( To use Virtual CINEMA FRONT, the speaker configuration settings must be changed. You can also connect up to 2 subwoofers (with built-in amplifier) to the unit.
PREPARATIONS > How to place speakers (speaker systems) Speaker systems using the unit’s internal amplifier (advanced setup) List of speaker systems using the unit’s internal amplifier In addition to the basic speaker systems, the unit also allows you to apply the following speaker configurations. To enjoy following systems, configure the necessary speaker settings in “Power Amp Assign” in the “Setup” menu.
PREPARATIONS > How to place speakers (speaker systems) 7.1 +1Zone The Zone function allows you to play back an input source in the room where the unit is installed and in another room. [Search tag]#Q01 Speaker systems 1 9 1 2 3 2 9 4 5 6 7 Zone2 Main zone AUDIO 1 AUDIO 3 AUDIO 2 (7 TV) AUDIO 4 AUDIO 5 ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 (3 MUSIC) OPTICAL COAXIAL GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F.
PREPARATIONS > How to place speakers (speaker systems) NOTE ( ( ( ( To use the Zone speaker system, the speaker configuration settings must be changed. You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the same sounds. When using only one subwoofer, you can place it either in the left or right side. When Zone2 output is enabled, the surround back speakers in the Main zone do not output sound.
PREPARATIONS > How to place speakers (speaker systems) 5.1.2 +1Zone The Zone function allows you to play back an input source in the room where the unit is installed and in another room. [Search tag]#Q01 Speaker systems E R 1 1 2 3 9 2 9 4 5 Zone2 Main zone AUDIO 1 AUDIO 3 AUDIO 2 (7 TV) AUDIO 4 AUDIO 5 ZONE OUT ZONE 2 PHONO (3 MUSIC) OPTICAL COAXIAL PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F.
PREPARATIONS > How to place speakers (speaker systems) NOTE ( ( ( ( To use the Zone speaker system, the speaker configuration settings must be changed. You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the same sounds. When using only one subwoofer, you can place it either in the left or right side. When Zone2 output is enabled, the front presence speakers in the Main zone do not output sound.
PREPARATIONS > How to place speakers (speaker systems) BI-AMP You can connect the front speakers that support bi-amp connections. To enable the bi-amp function, configure the necessary speaker settings. [Search tag]#Q01 Speaker systems Bi-amp 1 2 3 9 9 4 AUDIO 1 AUDIO 2 (7 TV) (3 MUSIC) OPTICAL AUDIO 3 AUDIO 4 5 AUDIO 5 COAXIAL ZONE OUT ZONE 2 PHONO PRE OUT FRONT SUBWOOFER 1 GND 2 SPEAKERS SURROUND CENTER 54 3 FRONT EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F.
PREPARATIONS > How to place speakers (speaker systems) NOTICE ( Before making bi-amp connections, remove any brackets or cables that connect a woofer with a tweeter. If you are not making bi-amp connections, make sure that the brackets or cables are connected before connecting the speaker cables. Refer to the instruction manual of the speakers for details. NOTE The following speakers cannot be connected simultaneously.
PREPARATIONS > Connecting speakers Connecting speakers Speaker requirements Speakers and subwoofers to be connected to the unit must meet the following requirements: ( Use following speakers. the front speakers: with an impedance of at least 4-ohm other speakers: with an impedance of at least 6-ohm ( ( ( Use a subwoofer with built-in amplifier. [Search tag]#Q01 Speaker systems NOTE ( ( ( ( ( Prepare the number of speakers according to your speaker system.
PREPARATIONS > Connecting speakers Cable requirements Use the following types of commercially-available cables to connect speakers to the unit: ( Speaker cables (for connecting the speakers) + – ( + – Audio pin cable (for connecting a subwoofer) Related links “Connecting the speaker” (p.
PREPARATIONS > Connecting speakers How to connect speakers Connecting the speaker Connect a speaker cable between the negative (–) terminal of the unit and the negative (–) terminal of the speaker, and between the positive (+) terminal of the unit and the positive (+) unit of the speaker. Remove the unit’s power cable from an AC wall outlet before connecting the speaker.
PREPARATIONS > Connecting speakers NOTE ( ( If “Check SP Wires” appears on the front display when the unit is turned on, turn off the unit, and then confirm that the speaker cables are not short circuited. (U.S.A., Canada, China, Taiwan, Brazil, Central and South America and General models only) When using a banana plug, tighten the speaker terminal and insert a banana plug into the end of the terminal. a SP EA K FR ON T ER S Banana plug b Related links “Connecting the subwoofer” (p.
PREPARATIONS > Connecting speakers Connecting the subwoofer Use an audio pin cable to connect the subwoofer. Unplug the power cables of the unit and subwoofer from the AC wall outlets before connecting the subwoofer. Audio pin cable ZONE ZONEOUT 2 FRON PRE OU T T SUBW OOFER 1 2 Related links “HDMI connection with a TV” (p.
PREPARATIONS > Connecting a TV Connecting a TV HDMI connection with a TV Connect a TV to the unit with an HDMI cable. When the TV audio is played back on the unit, use eARC/ARC function or use a digital optical cable to input TV audio to the unit. [Search tag]#Q02 Connect TV NOTE ( ( ( ( Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable as short as possible to prevent signal quality degradation.
PREPARATIONS > Connecting a TV n Connecting a digital optical cable If your TV does not support eARC/ARC, connect your TV to the unit with a digital optical cable. The unit (rear) HDMI OUT jack HDMI input TRIGGER OUT 12V HDMI OUT 0.
PREPARATIONS > Connecting playback devices Connecting playback devices HDMI connection with a video device such as a BD/DVD player Connect a video device to the unit with an HDMI cable. HDMI 1–7 jacks HDMI 1 2 3 (1 MOVIE) (5 STB) (6 GAME) The unit (rear) 5 6 7 HDMI TRIGGER OUT 12V 4 HDMI OUT 0.
PREPARATIONS > Connecting playback devices Connection other than HDMI with a playback device AUDIO connection with an audio device such as a CD player Connect audio devices such as CD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections.
PREPARATIONS > Connecting the radio antennas Connecting the radio antennas Connecting the FM antenna Model For U.S.A., Canada, Asia, Korea, China, Taiwan, Brazil, General, and Central and South America Connect the supplied FM antenna to the unit. Fix the end of the FM antenna to a wall.
PREPARATIONS > Connecting the radio antennas Connecting the AM antenna Model For U.S.A., Canada, Asia, Korea, China, Taiwan, Brazil, General, and Central and South America Connect the supplied AM antenna to the unit. Place the AM antenna on a flat surface.
PREPARATIONS > Connecting the radio antennas Related links “Network connection of the unit” (p.
PREPARATIONS > Connecting the radio antennas Connecting the DAB/FM antenna Model For U.K., Europe, Russia and Australia Connect the supplied DAB/FM antenna to the unit. Fix the antenna ends to a wall. DAB/FM antenna The unit (rear) HDMI 3 NETWORK 4 5 6 7 (4 NET RADIO) (8 SERVER) (6 GAME) PHONO ZONE OUT ZONE 2 PRE OUT FRONT SUBWOOFER 1 ANTENNA ( 2 RADIO ) DAB/FM 75 2 EXTRA SP2 EXTRA SP1 SURROUND BACK /ZONE 2/BI-AMP F.
PREPARATIONS > Preparing for connecting to a network Preparing for connecting to a network Network connection of the unit The unit supports wired and wireless connections. Select a connection method according to your network environment. You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit. NOTICE ( Do not connect this product to public Wi-Fi and/or Internet directly.
PREPARATIONS > Preparing for connecting to a network Connecting a network cable (wired connection) Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). When using a router that supports DHCP, you do not need to configure any network settings for the unit.
PREPARATIONS > Preparing for connecting to a network Preparing wireless antennas (wireless connection) Stand the wireless antennas upright for connecting to the wireless network or a Bluetooth device wirelessly. NOTICE ( Do not apply excessive force on the wireless antenna. Doing so may damage the antenna. Related links ( ( ( “Adding the unit to the MusicCast network” (p.86) “Selecting a wireless network connection method” (p.356) “Connecting an external power amplifier” (p.
PREPARATIONS > Connecting other devices Connecting other devices Connecting an external power amplifier When connecting an external power amplifier (pre-main amplifier) to enhance speaker output, connect the input jacks of the power amplifier to the PRE OUT jacks of the unit. The same channel signals are output from the PRE OUT jacks as from their corresponding SPEAKERS terminals. NOTICE To prevent the generation of loud noises or abnormal sounds, make sure the followings before making connections.
PREPARATIONS > Connecting other devices Connecting a device compatible with the trigger function The trigger function can control an external device in conjunction with operating the unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that supports a system connection or a device with a trigger input jack, you can use the trigger function by connecting the external device to the TRIGGER OUT jack with a monaural mini-jack cable. TRIGGER OUT jack TRIGGER OUT 12V 0.
PREPARATIONS > Turning on the power of the unit Turning on the power of the unit Plugging in the power cable After all the connections are complete, plug in the power cable. The unit (rear) NETWORK 6 7 (4 NET RADIO) (8 SERVER) To an AC wall outlet ANTENNA SUBWOOFER AM ( 2 RADIO ) FM 75 Related links “Setting the power to on/standby (Main zone)” (p.
PREPARATIONS > Turning on the power of the unit Setting the power to on/standby (Main zone) Switch the power of Main zone between on and standby. NOTE Main zone is the room where the unit is installed. 1 2 Set the zone switch to “MAIN”. Press z. Each time you press the key, you can switch the power of Main zone between on and standby. NOTE When you turn on the unit for the first time, the message regarding the network setup appears on the TV.
PREPARATIONS > Selecting the menu language Selecting the menu language Selecting the menu language To set the desired menu language, switch the input of the TV to display video from the unit and press SETUP. And then, select “Language” in the “SETUP” menu. Related links ( ( ( “Setting the menu language” (p.280) “Basic operation of the Setup menu” (p.177) “What is MusicCast” (p.
PREPARATIONS > Setting MusicCast Setting MusicCast What is MusicCast MusicCast is a wireless musical solution from Yamaha, allowing you to share music among all of your rooms with a variety of devices. You can enjoy music from your smartphone, PC, NAS drive, Internet radio station and music streaming service anywhere in your house with one easy-to-use dedicated application “MusicCast CONTROLLER”. For more details and a lineup of MusicCast compatible products, visit the Yamaha website.
PREPARATIONS > Setting MusicCast Using MusicCast CONTROLLER To use the network features on the MusicCast compatible device, you need the dedicated application “MusicCast CONTROLLER” for the operation. Search for the free application “MusicCast CONTROLLER” on the App Store or Google Play and install it to your device. Related links “Adding the unit to the MusicCast network” (p.
PREPARATIONS > Setting MusicCast Adding the unit to the MusicCast network Perform the following procedure to add the unit to the MusicCast network. You can also configure the unit’s wireless network settings at once. 1 Launch the “MusicCast CONTROLLER” application on your mobile device and tap “Setup”. 2 Operate the “MusicCast CONTROLLER” application following the on-screen instructions.
PREPARATIONS > Using the MusicCast Surround function Using the MusicCast Surround function Configuring wireless speakers Using devices that support the MusicCast Surround function, you can enjoy a 5.1.2-channel or 5.1-channel system with wireless surround speakers and subwoofer. NOTE Refer to the instruction manual of the devices that support the MusicCast Surround function for details on settings and operations.
PREPARATIONS > Using the MusicCast Surround function NOTE ( ( In a 5.1.2-channel or 5.1-channel system, the surround speakers and subwoofer can be wireless. With other systems, only the subwoofer can be wireless. With wireless surround speakers Sound will not be output from the speaker terminals (SURROUND) on the unit. Surround back speakers cannot be used. With a wireless subwoofer One subwoofer can be wireless. Sound will not be output from the pre-out jacks (SUBWOOFER 1 and 2) on the unit.
PREPARATIONS > Configuring the speaker settings Configuring the speaker settings Flow of the speaker configurations Before using the unit, adjust the speaker settings such as volume balance and acoustic parameters. With the supplied YPAO microphone, the unit detects speaker connections and measures the distances from them to your listening position(s) that is measuring position(s). And then, the unit automatically optimizes the speaker settings such as volume balance and acoustic parameters.
PREPARATIONS > Configuring the speaker settings 5 Connect the YPAO microphone to the YPAO jack. The unit (front) 1 9 2 3 4 5 Ear height The following screen appears on the TV.
PREPARATIONS > Configuring the speaker settings 6 According to the guidance displayed on the screen, start the measurement. If you want to enable an item under “Measuring option”, use the left/right cursor keys to select the item. The following screen appears on the TV when the measurement finishes. After confirming the measurement results, press ENTER.
PREPARATIONS > Configuring the speaker settings Related links ( ( ( ( ( ( “Changing the speaker impedance setting” (p.199) “Assigning speaker configuration” (p.93) “Error messages from YPAO” (p.99) “Warning messages from YPAO” (p.100) “Configuring the speaker settings automatically based on the YPAO measurement results” (p.95) “Adjusting the high- and low-frequency levels automatically according to the volume” (p.
PREPARATIONS > Configuring the speaker settings Assigning speaker configuration If you use any of the following speaker configurations, configure the corresponding speaker settings manually. ( When using the surround back speakers ( When using bi-amp connections or zone connections ( When using the surround speakers placed in front (Virtual CINEMA FRONT) ( When using the front presence speakers for Dolby Atmos or DTS:X playback Related links ( ( ( “Setting your speaker system” (p.
PREPARATIONS > Configuring the speaker settings Optional measurement of YPAO YPAO measuring at multiple listening positions (multi measure) Select “Multi Measure” option if you will have several listening positions or if you want others to enjoy surround sound. You can take measurements at up to 8 different positions in the room. The speaker settings will be optimized to suit the area defined by those positions.
PREPARATIONS > Configuring the speaker settings Configuring the speaker settings automatically based on the YPAO measurement results Configuring the speaker settings automatically based on the YPAO multi measurement results Perform the following procedure to take a measurement when the “Multi Measure” option is selected. It takes about 15 minutes to measure 8 listening positions. NOTE ( ( During the measuring process, test tones are output at high volume. You cannot adjust the volume.
PREPARATIONS > Configuring the speaker settings 5 Connect the YPAO microphone to the YPAO jack. The unit (front) 1 9 2 3 4 5 Ear height 6 Select “Multiple” for measuring option on the entry screen.
PREPARATIONS > Configuring the speaker settings 7 According to the guidance displayed on the screen, start the measurement. The following screen appears on the TV when the measurement at the first position finishes. 8 Move the YPAO microphone to the next listening position and select “OK”. Repeat it until measurements at all listening positions (up to 8) have been taken. 9 When the measurements at the positions you want to measure are completed, select “Skip”.
PREPARATIONS > Configuring the speaker settings NOTICE ( The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment).
PREPARATIONS > Configuring the speaker settings Error messages from YPAO If any error message is displayed, resolve the problem by following on-screen instructions and perform YPAO again. [Search tag]#Q03 YPAO Error Error message Remedy E-1:No Front SP E-2:No Sur. SP E-3:No F.PRNS SP Exit YPAO, turn off the unit, and then check the speaker connections. E-4:No Sur. Back SP E-5:Noisy Keep the room quiet and retry YPAO.
PREPARATIONS > Configuring the speaker settings Warning messages from YPAO If a warning message is displayed, resolve the problem by following table and perform YPAO again. You can still apply the measurement results, however, we recommend you resolve the problem and perform YPAO again in order to use the unit with the optimal speaker settings. Warning message Remedy Check the cable connections (+/-) of the corresponding speaker. If the speaker is connected incorrectly: Reconnect the speaker cable.
ENJOYING SOUND > Enjoying sound field effects ENJOYING SOUND Enjoying sound field effects Selecting your favorite sound mode The unit is equipped with a variety of sound programs and surround decoders. You can enjoy playback sources with your favorite sound mode such as sound field effect or stereo playback. MAIN ZONE 2 SLEEP SCENE 1 3 2 4 STRAIGHT PURE DIRECT ENHANCER SUR.
ENJOYING SOUND > Enjoying sound field effects Enjoying 3-dimentional sound fields The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like actual movie theaters or concert halls in your room and enjoy natural 3-dimensional sound fields. NOTE ( ( ( You can adjust the effect level of the sound program (enhance or reduce the sound field effect) in “DSP Level” in the “Setup” menu.
ENJOYING SOUND > Enjoying sound field effects Enjoying sound field effects optimized for the type of content The unit is equipped with a variety of sound programs. You can enjoy playback sources with your favorite sound mode. You can select a sound program by pressing PROGRAM. ( ( We recommend a sound program in the “MOVIE” category displayed on the front display to enjoy video content. We recommend a sound program in the “MUSIC” category displayed on the front display to enjoy music content.
ENJOYING SOUND > Enjoying sound field effects Standard This program creates a sound field that emphasizes the surround feeling without disturbing the original acoustic positioning of multichannel audio. Its design is based on the concept of the ideal movie theater, in which the audience is surrounded by beautiful reverberations from the left, right, and rear. Spectacle This program delivers the scale and grandeur of spectacular movie productions.
ENJOYING SOUND > Enjoying sound field effects Enjoying sound field effects without surround speakers (Virtual CINEMA DSP) If you select one of the sound programs when no surround speakers are connected, the unit automatically creates the surround sound field using the front speakers. You can enjoy sound field effects without surround speakers. NOTE Virtual CINEMA DSP does not work on “2ch Stereo” and “All-Channel Stereo”. Select a sound program besides those.
ENJOYING SOUND > Enjoying sound field effects Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT) When the surround speakers are placed in front and “Virtual CINEMA FRONT” in the “Setup” menu is set to “On”, the unit creates the virtual surround speakers in the rear side. You can enjoy multichannel surround sound only with speakers placed in the front. Related links ( ( “Setting the use of Virtual CINEMA FRONT” (p.195) “Virtual CINEMA FRONT” (p.
ENJOYING SOUND > Enjoying sound field effects Enjoying surround sound with headphones (SILENT CINEMA) You can enjoy surround or sound field effects, like a multichannel speaker system, with stereo headphones by connecting the headphones to the PHONES jack and selecting a sound program or a surround decoder. Related links ( ( “Enjoying sound field effects optimized for the type of content” (p.103) “Enjoying multichannel playback without sound field effects (surround decoder)” (p.
ENJOYING SOUND > Enjoying unprocessed playback Enjoying unprocessed playback Enjoying original sound (straight decode) You can play back input sources without any sound field effects. The unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds for multichannel sources. Each time you press STRAIGHT, the straight decode mode is enabled or disabled. NOTE ( ( When surround back speakers are used, the unit produces 7.
ENJOYING SOUND > Enjoying unprocessed playback Enjoying multichannel playback without sound field effects (surround decoder) The unit enables multichannel playback from 2-channel/multichannel sources without sound field effects. Press SUR. DECODE to select a surround decoder. Each time you press SUR. DECODE, the surround decoder changes. NOTE ( ( ( ( ( You can also change the surround decoder “Sur.Decode” in the “Setup” menu.
ENJOYING SOUND > Enjoying unprocessed playback Enjoying pure high fidelity sound (Pure Direct) The unit plays back the selected source with the least circuitry and no sound field effects. It allows you to enjoy Hi-Fi sound quality. Each time you press PURE DIRECT, the direct playback mode is enabled or disabled. When the Pure Direct is enabled, “PURE DIRECT” lights up on the front panel. NOTE When the Pure Direct is enabled, the following functions are not available.
ENJOYING SOUND > Enjoying 3-dimensional sound Enjoying 3-dimensional sound Enjoying Dolby Atmos® and DTS:X™ Playing back Dolby Atmos or DTS:X content creates realistic sound that comes from every direction, including overhead. To receive the full effect, we recommend a speaker system with front presence speakers. About Dolby Atmos® ( Dolby Atmos content are decoded as Dolby TrueHD or Dolby Digital Plus in the following situations. (Dolby Atmos PCM format is always decoded as Dolby Atmos.
ENJOYING SOUND > Enjoying favorite sound Enjoying favorite sound Enjoying more powerful sound to the audio source (Compressed Music Enhancer) You can enjoy a dynamic sound by adding depth and breadth to the sound. This function can be used along with any other sound modes. For digitally compressed formats, you can play back an enriched sound close to the original sound before it was compressed. Each time you press ENHANCER, Compressed Music Enhancer is enabled or disabled.
ENJOYING SOUND > Enjoying favorite sound Enhancing the low-frequency range from the subwoofer You can enhance the low-frequency range from the subwoofer while avoiding interference with the front speakers in middle- and low-frequency range. Set “Subwoofer Trim” in the “Option” menu. Related links “Adjusting the subwoofer volume” (p.
ENJOYING SOUND > Enjoying favorite sound Enjoying powerful sound at low volume Automatically you can correct the high- and low-frequency levels, hardly heard at low volume, based on the YPAO measurement results and the auditory sensation. Set “YPAO Volume” in the “Option” menu. NOTE ( ( “YPAO Volume” works after the YPAO measurement. “YPAO Volume” is automatically enabled after the YPAO measurement. Related links “Adjusting the high- and low-frequency levels automatically according to the volume” (p.
ENJOYING SOUND > Enjoying favorite sound Making easy to hear the dialogue sounds You can adjust the volume of dialogue sounds to become easy to hear. Set “Dialogue Level” in the “Setup” menu. Related links “Adjusting the volume of dialogue sound” (p.
ENJOYING SOUND > Enjoying favorite sound Enjoying bass sound with small speakers (Extra Bass) You can enjoy sufficient bass sound, regardless of the size of the front speakers and the presence or absence of a subwoofer. Set “Extra Bass” in the “Setup” menu. Related links “Setting the use of Extra Bass” (p.
ENJOYING SOUND > Enjoying favorite sound Enjoying sound better Enjoying music streaming services ( You can listen to better sound in music streaming services. Set Compressed Music Enhancer to “On”. For details, see the following: “Enjoying more powerful sound to the audio source (Compressed Music Enhancer)” (p.112) ( Enjoying sound at a low volume at night ( Sound at a low volume is hard to listen to. Set “Adaptive DRC” to “On”.
PLAYBACK > Basic playback procedure PLAYBACK Basic playback procedure Basic procedure for playing back video and music Basic procedure for playing back video and music is as follows. 1 2 Turn on the external devices. Use the input selection keys to select an input source. MAIN ZONE 2 SLEEP SCENE 1 3 2 4 PROGRAM PROGR PR OGRAM AM STRAIGHT PURE DIRECT ENHANCER SUR.
PLAYBACK > Basic playback procedure Item names and functions of the playback screen When playback starts, the playback screen appears on the TV. 1 2 a Status indicators Display the current shuffle/repeat settings and playback status (such as play/pause). b Playback information Displays the artist name, album name, song title, track number, station name, and elapsed time. NOTE ( ( ( Displayed items vary depending on the content of playback.
PLAYBACK > Basic playback procedure Item names and functions of the browse screen When the following input source is selected, the browse screen appears on the TV. ( SERVER ( NET RADIO ( USB 1 4 2 5 3 a List name b Contents list Displays the list of contents. Select an item and press ENTER to confirm the selection. c Item number/total d Status indicators Display the current shuffle/repeat settings and playback status (such as play/pause).
PLAYBACK > Basic playback procedure NOTE ( ( Displayed items vary depending on the input source. The music content delivered from streaming services can be operated by using MusicCast CONTROLLER on your mobile device.
PLAYBACK > Playing back TV audio Playing back TV audio Playback of TV audio with eARC/ARC Connect your TV that supports eARC/ARC to the unit with an HDMI cable to play back the TV audio on the unit. When you select a TV program with the TV remote control, the input source of the unit will be automatically switched to “TV” and the TV audio will be played back on the unit. NOTE ( ( ( ( When using eARC, you may set the HDMI Control to “Off”.
PLAYBACK > Playing back TV audio Playback of TV audio with a digital optical cable In the following case, use a digital optical cable to input TV audio to the unit. ( Your TV does not support eARC/ARC. ( You do not want to use eARC/ARC. 1 2 Set “ARC” in the “Setup” menu to “Off”. Select a video content (a TV program) with the TV remote control. The input source of the unit is automatically switched to “TV” and the TV audio will be played back on the unit.
PLAYBACK > Listening to the radio Listening to the radio Preparing to listen to the radio Setting the frequency steps Model For Asia, Taiwan, Brazil, General, and Central and South America Set the radio tuning frequency steps of the unit depending on your country or region. At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM. Depending on your country or region, set the frequency steps to 100 kHz for FM and 10 kHz for AM. 1 2 3 4 5 Press SETUP. Select “Function”.
PLAYBACK > Listening to the radio Preparing the DAB tuning Model For U.K., Europe, Russia and Australia Before listening to DAB (Digital Audio Broadcasting) radio, perform an initial scan to register the DAB radio stations automatically. 1 2 Select “TUNER” as the input source. 3 Press [jTUNING] to start an initial scan. Press BAND to select the DAB band. When the initial scan finishes, the unit automatically tunes in to the first DAB radio station in order by frequency.
PLAYBACK > Listening to the radio Frequency Channel label 190.640 MHz 7B 192.352 MHz 7C 194.064 MHz 7D 195.936 MHz 8A 197.648 MHz 8B 199.360 MHz 8C 201.072 MHz 8D 202.928 MHz 9A 204.640 MHz 9B 206.352 MHz 9C 208.064 MHz 9D 209.936 MHz 10A 211.648 MHz 10B 213.360 MHz 10C 215.072 MHz 10D 216.928 MHz 11A 218.640 MHz 11B 220.352 MHz 11C 222.064 MHz 11D 223.936 MHz 12A 225.648 MHz 12B 227.360 MHz 12C 229.072 MHz 12D 230.784 MHz 13A 232.496 MHz 13B 234.
PLAYBACK > Listening to the radio Listening to the radio You can tune in to a radio station by using the unit’s built-in tuner. 1 Select “TUNER” as the input source. “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. “TUNED” lights up on the front display when the unit is receiving a radio station signal. “STEREO” lights up on the front display when the unit is receiving a stereo radio signal. 2 Press BAND to select the following band.
PLAYBACK > Listening to the radio Displaying the Radio Data System information Model For U.K., Europe and Russia Radio Data System is a data transmission system used by FM stations. The unit can receive various types of data, such as “Program Service”, “Program Type”, “Radio Text” and “Clock Time”, when it is tuned in to a Radio Data System broadcasting station. 1 2 Tune in to the desired Radio Data System broadcasting station.
PLAYBACK > Listening to the radio Displaying the DAB information Model For U.K., Europe, Russia and Australia The unit can receive various types of DAB information when it is tuned into a DAB radio station. 1 2 Tune in to the desired DAB radio station. Push and rotate SELECT/ENTER on the front panel to select between the various display items. The information appears on the front display.
PLAYBACK > Listening to the radio Registering a radio station manually Tune in to a radio station and register it to a preset number. 1 2 Tune in to the desired radio station. 3 4 Press PRESET to select the preset number. Hold down MEMORY for 3 seconds. Press MEMORY. This completes the registration. NOTE ( ( ( ( You can register up to 40 radio stations as presets.
PLAYBACK > Listening to the radio Registering FM radio stations automatically (Auto Preset) You can register FM radio stations automatically. FM radio stations with strong signals are automatically registered to the preset numbers. 1 2 Select the FM band. 3 4 Press PRESET to select the preset number from which to start the registration. Hold down MEMORY for 3 seconds. Press [jTUNING]. The Auto Preset process starts. NOTE ( ( ( You can register up to 40 radio stations as presets.
PLAYBACK > Listening to the radio Clearing preset stations Clears radio stations registered to the preset numbers. 1 2 Select “TUNER” as the input source. 3 4 Press PRESET to select a preset station to be cleared. Hold down MEMORY for 3 seconds. Press MODE. The preset station is cleared. 5 6 Repeat steps 3 to 4 until all desired preset stations are cleared. Press BAND. The front display returns to the input select mode.
PLAYBACK > Playing back music with the Bluetooth® connection Playing back music with the Bluetooth® connection Playback of Bluetooth® device music on the unit You can play back music files stored on a Bluetooth device (such as smartphones) on the unit. CAUTION When you use Bluetooth device controls to adjust volume, the volume may be unexpectedly loud, and it could result in difficulty in hearing or damage to devices. If the volume suddenly increases during playback, stop playback immediately.
PLAYBACK > Playing back music with the Bluetooth® connection Playback of music using Bluetooth® speakers/headphones You can enjoy audio played back on the unit using Bluetooth speakers/headphones. Be sure to connect the Bluetooth speakers/headphones whose volume is adjustable. You cannot adjust the volume of the Bluetooth speakers/headphones from the unit. The unit Bluetooth speakers/headphones 1 2 3 4 Select an input source other than “Bluetooth”. Press SETUP.
PLAYBACK > Playing back music with AirPlay Playing back music with AirPlay Playback of music with AirPlay The AirPlay allows you to play back music on the unit. Click (Tap) the AirPlay icon on your iPhone or iTunes/ music and select the unit as the audio output device. CAUTION ( When you use AirPlay device controls to adjust volume, the volume may be unexpectedly loud, and it could result in difficulty in hearing or damage to devices.
PLAYBACK > Playing back music stored on a USB flash drive Playing back music stored on a USB flash drive Playback of USB flash drive content You can play back music files stored on a USB flash drive on the unit. 1 Connect the USB flash drive to the USB jack. The unit (front) ZONE USB YPAO PURE DIRECT PHONES 5V 1A USB flash drive 2 Select “USB” as the input source. The browse screen is displayed on the TV. If playback is ongoing on your USB flash drive, the playback screen is displayed.
PLAYBACK > Playing back music stored on a USB flash drive Related links ( ( ( ( ( “Item names and functions of the browse screen” (p.120) “Item names and functions of the playback screen” (p.119) “Configuring the shuffle setting” (p.172) “Configuring the repeat setting” (p.173) “Registering a favorite content as shortcut” (p.
PLAYBACK > Playing back music stored on media servers (PCs/NAS) Playing back music stored on media servers (PCs/NAS) Playback of music media servers (PCs/NAS) You can play back music files stored on your media server on the unit. NOTE You need to configure the media sharing setting on each device or media server software in advance. For details, refer to the instruction manual for the device or software. 1 Select “SERVER” as the input source. The browse screen is displayed on the TV.
PLAYBACK > Listening to Internet radio Listening to Internet radio Selecting an Internet radio station Select an Internet radio station and start playback. 1 Select “NET RADIO” as the input source. The browse screen is displayed on the TV. 2 Select an item. Playback starts and the playback screen is displayed. NOTE ( ( ( ( ( ( Press NET repeatedly to select the input source. To return to the top level while on the browse screen, hold down RETURN on the remote control.
PLAYBACK > Listening to music streaming services Listening to music streaming services Listening to a music streaming service You can enjoy the music content delivered from streaming services. For details on supported music streaming services, refer to products information of the Yamaha website or the MusicCast CONTROLLER app. Additional information of music streaming services is also carried in the following website. https://manual.yamaha.
USEFUL FUNCTIONS > Sleep timer function USEFUL FUNCTIONS Sleep timer function Setting the time of the sleep timer The unit switches to the standby mode after set time passes. Press SLEEP repeatedly to set the time of the sleep timer (120 min, 90 min, 60 min, 30 min, off). When the sleep timer is on, the sleep timer indicator lights up on the front display.
USEFUL FUNCTIONS > SCENE function SCENE function Selecting the input source and favorite settings with one touch (SCENE) The SCENE function allows you to select the input source and settings registered to the corresponding scene with just one touch. The settings which can be registered are as follows.
USEFUL FUNCTIONS > SCENE function Selecting a registered scene Press the following key on the remote control, and the input source and settings registered to the corresponding scene are directly selected. The unit turns on automatically when it is in standby mode.
USEFUL FUNCTIONS > SCENE function Zone2 SCENE (1): AUDIO1 SCENE (2): TUNER SCENE (3): AUDIO2 SCENE (4): NET RADIO SCENE (5): AUDIO3 SCENE (6): AUDIO4 SCENE (7): USB SCENE (8): SERVER Related links ( ( “Setting the functions for the color keys on the remote control” (p.258) “Selecting items to be included as the scene assignments” (p.
USEFUL FUNCTIONS > SCENE function Registering a scene You can change the default setting assigned to each SCENE key. When “NET”, “USB”, “Bluetooth” or “TUNER” is selected for the input source, you can register the assigned radio station or content. [Search tag]#Q04 SCENE 1 2 Prepare the unit’s settings you want to assign to a scene. Hold down the desired SCENE key on the remote control until the following message appears.
USEFUL FUNCTIONS > Shortcut function Shortcut function Registering a favorite content as shortcut You can register favorite content (such as music stored on media servers and Internet radio stations) as shortcuts. 1 2 Play back a song or a radio station to be registered. Hold down MEMORY for 3 seconds. MAIN ZONE 2 SLEEP SCENE 1 3 2 4 TOPP MENU TO POP UP/MENU HOME STRAIGHT PURE DIRECT ENHANCER SUR.
USEFUL FUNCTIONS > Shortcut function Recalling a registered content as shortcut Recall a registered content (such as music stored on media servers and Internet radio stations) by selecting the shortcut number. 1 Press BLUETOOTH, NET or USB. MAIN ZONE 2 SLEEP SCENE 1 3 2 4 PROGRAM PROGR PR OGRAM AM STRAIGHT PURE DIRECT ENHANCER SUR.
ENJOYING IN MULTIPLE ROOMS (ZONES) > Preparing zones ENJOYING IN MULTIPLE ROOMS (ZONES) Preparing zones Playback in multiple rooms (multi zone function) You can play back an input source in the room where the unit is installed and in another room. You can use the unit according to your favorite, for example, while you are watching TV in the living room (Main zone), another person can listen to radio in the study room (Zone2).
ENJOYING IN MULTIPLE ROOMS (ZONES) > Preparing zones Multi-zone configuration examples You can enjoy music using speakers placed in other rooms. n Using SPEAKERS terminals Audio Study room (Zone2) Living room (Main zone) n Using ZONE OUT jacks Audio Study room (Zone2) Living room (Main zone) Related links “Connecting zone speakers using the unit’s internal amplifier” (p.
ENJOYING IN MULTIPLE ROOMS (ZONES) > Preparing zones Connecting zone speakers Connecting zone speakers using the unit’s internal amplifier Connect zone speakers to the unit with speaker cables. And according to the speaker’s connection, change your speaker configuration setting. NOTICE ( Unplug the unit’s power cable from an AC wall outlet before connecting the speakers. 1 2 Connect zone speakers to the EXTRA SP1 or EXTRA SP2 terminals. Set “Power Amp Assign” in the “Setup” menu.
ENJOYING IN MULTIPLE ROOMS (ZONES) > Preparing zones Connecting zone speakers using an external amplifier Connect the external amplifier placed in zone to the unit with a stereo pin cable. You can adjust the volume for zone output with the unit. When using an external amplifier with volume control, set “Volume” in “Zone2” in the “Setup” menu to “Fixed”. NOTICE ( Unplug the unit’s power cable from the AC wall outlet before connecting an external amplifier.
ENJOYING IN MULTIPLE ROOMS (ZONES) > Operating zones Operating zones Turning on/off the power of zones Switch the power of each zone between on and off. 1 2 Set the zone switch on the remote control to the zone that you want to operate. Press z. Each time you press the key, you can turn on/off the zone. When the zone is turned on, “ZONE” lights up on the front panel. NOTE ( ( If all of the zones are turned off, the unit switches to the standby mode.
ENJOYING IN MULTIPLE ROOMS (ZONES) > Operating zones Basic procedure in zone Basic procedure for playback in zone is as follows. The zone selected by the zone switch can be operated. 1 2 3 4 5 Turn on the zone. Turn on the external devices connected to the unit. Use the input selection keys to select an input source. Start playback on the external device or select a radio station. Press VOLUME to adjust the volume. NOTICE ( To avoid unexpected noise, never play back DTS-CDs in Zone2.
ENJOYING IN MULTIPLE ROOMS (ZONES) > Operating zones Other procedure in zone Other procedure in every zone is as follows. ( ( ( Press SCENE key to select the input source and settings with just one touch. To set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP repeatedly. The zone output will be disabled after a specified period of time. To enable the Compressed Music Enhancer function, press ENHANCER.
ENJOYING IN MULTIPLE ROOMS (ZONES) > Operating zones Enjoying the same source in multiple rooms (party mode) The party mode allows you to play back in all zones the same music that is being played back in the Main zone. During the party mode, stereo playback is automatically selected for all zones. Each time you press PARTY, the party mode is turned on or off. Related links “Setting the use of switching to the party mode on zone” (p.
CONFIGURATIONS > Configuring the unit CONFIGURATIONS Configuring the unit Using the menu The unit is equipped with following menus. “Option” menu: You can configure playback settings according to the input source currently being played back. Operate this menu displayed on the TV with the remote control. “Setup” menu: You can configure the unit’s various functions. Operate this menu displayed on the TV with the remote control. “Front Display” menu: You can configure the unit’s system settings.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Configuring playback settings for different playback sources (Option menu) Basic operation of the Option menu Perform the following basic procedure to operate the “Option” menu. Operate this menu displayed on the TV with the remote control. 1 Press OPTION. MAIN ZONE 2 SLEEP SCENE 1 3 2 MUTE 4 STRAIGHT PURE DIRECT ENHANCER SUR.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Related links “Default settings of the Option menu” (p.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Option menu items Use the following table to configure playback settings of the unit. Item Page YPAO Volume p.160 Adaptive DRC p.161 Adaptive DSP Level p.162 Enhancer p.163 Input Trim p.164 Subwoofer Trim p.165 Lipsync p.166 Format p.167 Channel In p.167 Channel Out p.167 Sampling p.167 Dialogue p.167 Video In p.168 Video Out p.168 Color Format p.168 Audio In Audio In p.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Configuring the volume automatically based on the YPAO measurement results Adjusting the high- and low-frequency levels automatically according to the volume Selects whether to adjust the high- and low-frequency levels to the volume automatically. If this function is set to “On”, you can enjoy natural sounds even at low volume. YPAO Volume works effectively after the YPAO measurement.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Adjusting the dynamic range automatically Selects whether to adjust the dynamic range (from maximum to minimum) to the volume automatically. If this function is set to “On”, it is useful for listening to playback at a low volume at night. Option menu “YPAO Volume” > “Adaptive DRC” Settings Off Does not adjust the dynamic range automatically. On Automatically adjusts the dynamic range.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Configuring DSP/Surround Adjusting the sound field effect level automatically Selects whether to automatically adjust the effect level of the sound program. Option menu “DSP/Surround” > “Adaptive DSP Level” Settings Off Does not adjust the effect level automatically. On Adjusts the effect level automatically depending on the YPAO measurement results and volume adjustments.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Setting Compressed Music Enhancer Selects whether to use Compressed Music Enhancer. You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer. Option menu “DSP/Surround” > “Enhancer” Settings Off Disables Compressed Music Enhancer. On Enables Compressed Music Enhancer. NOTE This setting is applied separately to each input source.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Correcting volume differences during playback Correcting volume differences between input sources Corrects volume differences between input sources. If you are bothered by volume differences when switching between input sources, use this function to correct it. Option menu “Volume Trim” > “Input Trim” Setting range -6.0 dB to +6.0 dB NOTE This setting is applied separately to each input source.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Adjusting the subwoofer volume Fine-adjusts the subwoofer volume. Option menu “Volume Trim” > “Subwoofer Trim” Setting range -6.0 dB to +6.0 dB Related links “Basic operation of the Option menu” (p.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Enabling Lipsync adjustment Selects whether to use the adjustment configured in “Lipsync” in the “Setup” menu. Option menu “Lipsync” > “Lipsync” Settings Off Disables the “Lipsync” adjustment. On Enables the “Lipsync” adjustment. NOTE This setting is applied separately to each input source. Related links ( ( “Setting the adjustment method of the Lipsync function” (p.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Checking the audio signal information Displays information about the audio signal. Option menu “Audio Signal Information” Format Channel In Channel Out Audio format of the input signal The number of source channels in the input signal (front/surround/LFE) For example, “3/2/0.1” means 3 front channels, 2 surround channels, and LFE.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Checking the video signal information Displays information about the video signals. Option menu “Video Signal Information” Video In Type and resolution of the input video signal Video Out Type and resolution of the output video signal Color Format Color format of the video signal Related links “Basic operation of the Option menu” (p.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Combining an audio input jack with a HDMI input jack Selects the audio input jack to play back together with a HDMI input jack. You can play back HDMI video with audio via an audio input jack except HDMI input jack. After select HDMI you want to set as the input source, select an audio input jack in this menu.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Selecting a video source to be displayed with the selected audio source Selects a video source to be displayed with the selected audio source. You can watch the video from a different source while listening to the radio and so on. Option menu “Video Out” > “Video Out” Settings Off Does not output video. HDMI 1-7 Outputs video input through the corresponding video input jack.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Setting the use of Auto Play function Selects whether to use Auto Play function in the content such as streaming services. Option menu “Auto Play” Settings Off Disables Auto Play function. On Starts automatically to play back the last content which you played back. Auto Starts automatically to play back the content which only you played back at setting the unit to standby mode.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Configuring the shuffle setting Configures the shuffle setting for playback. Option menu “Shuffle” > “Shuffle” Settings Off Turns off the shuffle function. On Plays back songs in the current album (folder) in random order. NOTE This setting is available only when “USB” or “SERVER” is selected as the input source. Related links “Basic operation of the Option menu” (p.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Configuring the repeat setting Configures the repeat setting for playback. Option menu “Repeat” > “Repeat” Settings Off Turns off the repeat function. One Plays back the current song repeatedly. All Plays back all songs in the current album (folder) repeatedly. NOTE This setting is available only when “USB” or “SERVER” is selected as the input source. Related links “Basic operation of the Option menu” (p.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Setting the use of volume control via AirPlay/Bluetooth Selects whether to use volume control from AirPlay devices and Bluetooth devices. If other than “Off” is set, you can adjust the unit’s volume from the AirPlay devices and Bluetooth devices. Option menu “Volume Interlock” > “Interlock” Settings Off Disables volume control from AirPlay/Bluetooth devices.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Adding a “NET RADIO” radio station to the “Favorites” folder When you select “NET RADIO” as the input source, you can register the currently playing radio station to the “Favorites” folder. On the playback screen, the current station is added to the “Favorites” folder. On the browse screen, the station selected in the list is added to the “Favorites” folder.
CONFIGURATIONS > Configuring playback settings for different playback sources (Option menu) Removing a radio station from the “Favorites” folder Removes a radio station from the “Favorites” folder. On the browse screen, select the station to be removed in advance.
CONFIGURATIONS > Configuring various functions (Setup menu) Configuring various functions (Setup menu) Basic operation of the Setup menu Perform the following basic procedure to operate the “Setup” menu. Operate this menu displayed on the TV with the remote control. 1 Press SETUP. MAIN ZONE 2 SLEEP SCENE 1 3 2 MUTE 4 STRAIGHT PURE DIRECT ENHANCER SUR.
CONFIGURATIONS > Configuring various functions (Setup menu) NOTE ( ( If new firmware is available, the message screen appears. If new firmware is available, the envelope icon (p) appears in the “Setup” menu. Related links ( ( “Updating the unit’s firmware via the network” (p.298) “Default settings of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setup menu items Speaker Settings Item Page Power Amp Assign Configuration p.188 Subwoofer p.189 Front p.190 Center p.190 Surround p.190 Surround Back p.190 Presence p.190 Layout p.191 Crossover p.192 Subwoofer Phase p.193 Extra Bass p.194 Virtual CINEMA FRONT p.195 Distance p.196 Level p.197 Equalizer p.198 Speaker Impedance p.199 Test Tone p.
CONFIGURATIONS > Configuring various functions (Setup menu) HDMI Settings Item Page HDMI Control p.201 Audio Output p.202 Standby Through p.203 4K Upscaling p.204 HDCP Version p.205 Standby Sync p.206 ARC p.207 HDMI Video Format p.
CONFIGURATIONS > Configuring various functions (Setup menu) Sound Settings Item Page Tone Control DSP Parameter Surround Decoder All-Channel Stereo Lipsync Dialogue Volume Virtual Speaker p.209 (sound program) p.210 Surround Decode p.212 Center Spread p.213 Center Image p.214 Level p.215 Front / Rear Balance p.216 Left / Right Balance p.217 Height Balance p.218 Monaural Mix p.219 Select p.220 Adjustment p.221 Dialogue Level p.222 DTS Dialogue Control p.
CONFIGURATIONS > Configuring various functions (Setup menu) Scene Settings Item Page Scene Setting p.230 Scene Rename p.
CONFIGURATIONS > Configuring various functions (Setup menu) Multi Zone Settings Item Page Information p.232 Volume p.233 Max Volume p.234 Initial Volume p.235 Left / Right Balance p.236 Monaural p.237 Enhancer p.238 Extra Bass p.239 Tone Control Tone Control p.240 Audio Delay Audio Delay p.241 Volume (zone) Sound Mode Party Mode Set p.242 Zone Rename p.
CONFIGURATIONS > Configuring various functions (Setup menu) Function Settings Item Input Setting Page Input Rename p.244 Input Skip p.246 TV Audio Input p.247 DSP Skip Trigger Output p.248 Trigger Mode p.249 Target Zone p.252 Display Settings User Interface ECO Tuner Dimmer p.253 Volume p.254 Short Message p.255 Position p.256 Touch Sound p.257 Remote Color Key p.258 Memory Guard p.259 Auto Power Standby p.260 ECO Mode p.261 Frequency Step p.262 Initialization p.
CONFIGURATIONS > Configuring various functions (Setup menu) Network Settings Item Page Information p.267 Network Connection p.268 IP Address p.270 DMC Control p.271 Network Standby p.272 Network Name p.273 MusicCast Link Power Interlock p.
CONFIGURATIONS > Configuring various functions (Setup menu) Bluetooth Settings Item Page Bluetooth Audio Receive Audio Send p.275 Disconnect p.276 Bluetooth Standby p.277 Transmitter p.278 Device Search p.
CONFIGURATIONS > Configuring various functions (Setup menu) Language Setting Item Page Language p.
CONFIGURATIONS > Configuring various functions (Setup menu) Configuring the speaker settings Setting your speaker system Selects the setting according to the speakers that are connected. Setup menu “Speaker” > “Power Amp Assign” Settings Basic A normal speaker system. 7.1 +1Zone Zone speakers in addition to the 7.1 system in the Main zone. 5.1.2 +1Zone Zone speakers in addition to the 5.1.2 system in the Main zone. BI-AMP Front speakers that support bi-amp connections.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of a subwoofer Selects the setting according to the use of your subwoofer. Setup menu “Speaker” > “Configuration” > “Subwoofer” Settings One or two subwoofers are connected. Use None The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. No subwoofer is connected. The front speakers will produce low-frequency components.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of each speaker and its size Selects the setting according to the use and size of your speakers. Setup menu “Speaker” > “Configuration” > (speaker) Settings Small Large None Small speakers. As a general guideline, the woofer diameter is smaller than 16 cm (6.1/4”). The subwoofer will produce low-frequency components (configurable in “Crossover”). Large speakers. As a general guideline, the woofer diameter is larger than 16 cm (6.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the layout of the front presence speakers Selects a presence layout when front presence speakers are used. This setting facilitates the optimization of the sound field effect. Setup menu “Speaker” > “Configuration” > “Layout” Settings Front Height The front presence speakers are installed on the front wall. Overhead The front presence speakers are installed to the ceiling.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the crossover frequency of the low-frequency components Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to “Small”. A frequency sound lower than the specified value will be produced from the subwoofer or front speakers.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the phase of the subwoofer Sets the phase of the subwoofer. When the bass sound is lacking, switch the subwoofer phase. Setup menu “Speaker” > “Configuration” > “Subwoofer Phase” Settings Normal Does not reverse the subwoofer phase. Reverse Reverses the subwoofer phase. Related links ( ( “Setting the use of a subwoofer” (p.189) “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of Extra Bass Uses Extra Bass to enhance bass sound. If this function is set to “On”, you can enjoy sufficient bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer. Setup menu “Speaker” > “Configuration” > “Extra Bass” Settings Off Disables Extra Bass. On Enables Extra Bass. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of Virtual CINEMA FRONT Selects whether to use Virtual CINEMA FRONT. Setup menu “Speaker” > “Configuration” > “Virtual CINEMA FRONT” Settings Off Disables Virtual CINEMA FRONT. On Enables Virtual CINEMA FRONT. NOTE This setting is not available when “Surround” in the “Setup” menu is set to “None”. Related links ( ( ( “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the distance between each speaker and the listening position Sets the distance so that sounds from the speakers reach the listening position at the same time. Setup menu “Speaker” > “Distance” > (speaker) Setting range 0.30 m to 24.00 m (1.0 ft to 80.0 ft) NOTE Select the unit of distance from “Meter” or “Feet” in “Unit”. Related links ( ( “Setting the use of each speaker and its size” (p.190) “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the volume of each speaker Adjusts the volume of each speaker to suit your listening position. Setup menu “Speaker” > “Level” > (speaker) Setting range -10.0 dB to +10.0 dB NOTE Test tone output helps you to adjust the speaker balance while confirming its effect. Related links ( ( ( “Setting the use of each speaker and its size” (p.190) “Outputting test tones” (p.200) “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the equalizer Selects the type of equalizer to adjust the tone. Setup menu “Speaker” > “Equalizer” > “EQ Select” Settings GEQ Adjusts the equalizer manually. YPAO:Flat Adjusts each speaker to achieve the same characteristics. YPAO:Front Adjusts each speaker to achieve the same characteristics as the front speakers. YPAO:Natural Adjusts each speaker to achieve the same characteristics with lowered high frequency range.
CONFIGURATIONS > Configuring various functions (Setup menu) Changing the speaker impedance setting Sets the unit’s speaker impedance settings depending on the impedance of the speakers connected. Setup menu “Speaker” > “Speaker Impedance” Settings 6 Ω MIN 8 Ω MIN For 6-ohm or higher speakers. You can also connect 4-ohm speakers for the front speakers. For 8-ohm or higher speakers. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Outputting test tones Outputs the test tone when you adjust the speaker balance or equalizer while confirming its effect. Setup menu “Speaker” > “Test Tone” Settings Off Does not output test tones. On Outputs test tones. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Configuring the HDMI settings Setting the use of HDMI Control Selects whether to use HDMI Control which operate HDMI Control-compatible devices. Setup menu “HDMI” > “HDMI Control” Settings Off On Disables HDMI Control. Enables HDMI Control. The settings in “Standby Sync” and “ARC” are applied. NOTE You need to perform the HDMI Control link setup after connecting HDMI Control-compatible devices.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the output of HDMI audio to the TV's speakers Selects whether to output HDMI audio to the speakers of a TV connected via the HDMI OUT jack. Setup menu “HDMI” > “Audio Output” Settings Off Disables audio output from the TV. On Enables audio output from the TV. NOTE This setting is available only when “HDMI Control” in the "Setup" menu is set to “Off”. Related links ( ( “Setting the use of HDMI Control” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of HDMI Standby Through Selects whether to output video/audio, which is input through HDMI jacks, to the TV when the unit is in standby mode. Setup menu “HDMI” > “Standby Through” Settings Off Does not output video/audio to the TV. On Outputs video/audio to the TV. The unit consumes more power than when “Off” or “Auto” is selected.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of 4K upscaling of the HDMI video signal Selects whether to use 4K upscaling of the HDMI video signal. If this function is set to “On”, 1080p content is displayed at 4K resolution. Setup menu “HDMI” > “4K Upscaling” Settings Off Disables the 4K upscaling. On Enables the 4K upscaling. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the version of HDCP used on the HDMI input jacks Selects the HDCP version of the HDMI input jacks. You can set this function for watching 4K video content if necessary. This setting is applied separately to each HDMI input jack. Setup menu “HDMI” > “HDCP Version” > (HDMI input) Settings Auto Automatically sets the version of HDCP according to content. 1.4 Sets the version of HDCP to always be 1.4.
CONFIGURATIONS > Configuring various functions (Setup menu) Linking the standby modes of the unit and the TV Selects whether to use HDMI control to link the unit's standby mode to the TV's power when “HDMI Control” in the “Setup” menu is set to “On”. Setup menu “HDMI” > “Standby Sync” Settings Off Does not link the unit's standby mode. On Sets the unit to standby mode when the TV is turned off.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of ARC Selects whether to output TV audio to the speakers connected to the unit when “HDMI Control” in the “Setup” menu is set to “On”. Setup menu “HDMI” > “ARC” Settings Off Disables ARC. On Enables ARC. NOTE You do not need to change “On” (default setting) normally. In case noises are produced because TV audio signals input to the unit are not supported by the unit, set to “Off”. And use the TV’s speakers.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the HDMI 4K signal format Selects the format of signals input/output at the unit when HDMI 4K compatible TV and playback device are connected to the unit. This setting is applied separately to each HDMI input jack. Setup menu “HDMI” > “HDMI Video Format” > (HDMI input) Settings Mode 1 Inputs/outputs 4K signals shown in the following table. Mode 2 Inputs/outputs 4K signals shown in the following table.
CONFIGURATIONS > Configuring various functions (Setup menu) Configuring the sound settings Adjusting the tone of the audio output Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually. Setup menu “Sound” > “Tone Control” Setting range -6.0 dB to +6.0 dB NOTE ( ( ( When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears. If you set an extreme value, sounds may not match those from other channels.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the sound field effect level Adjusts the effect level of the sound program to enhance or reduce the sound field effect. Select the sound program and press ENTER for adjusting. Setup menu “Sound” > “DSP Parameter” > (sound program) Setting range Item Function DSP Level Adjusts the effect level of the sound program (to enhance or reduce -6 dB-+3 dB the sound field effect).
CONFIGURATIONS > Configuring various functions (Setup menu) Item Function Settings Surround Back Room Size Adjusts the broadening effect of the surround back sound field. Higher value enhances the broadening effect, and lower value reduces it. 0.1-2.0 The surround back sound field is created in the rear side. Adjusts the loss of the surround back sound field. Higher value Surround Back Liveness strengthens the reflectivity, and lower value weakens it.
CONFIGURATIONS > Configuring various functions (Setup menu) Selecting the surround decoder used in the program Selects a surround decoder. It is used when “Surround Decode” is selected by PROGRAM on the remote control. Setup menu “Sound” > “Surround Decoder” > “Surround Decode” Settings Uses the decoder automatically selected by input source. Auto The DTS Neural:X decoder is selected for DTS sources and the Dolby Surround decoder is selected for other sources. Dolby Surround decoder.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of Center Spread Selects whether to spread the center channel signals from a 2-channel source to left and right when “bDsur” is selected for the surround decoder. Setup menu “Sound” > “Surround Decoder” > “Center Spread” Settings Off Disables Center Spread. On Enables Center Spread. NOTE If you feel the center sound is too strong, set this function to “On”.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the center localization (broadening effect) of the front sound field Adjusts the center localization (broadening effect) of the front sound field when “Neo:6 Music” is selected for the surround decoder. Higher value strengthens the center localization (less broadening effect) and lower value weakens it (more broadening effect). Setup menu “Sound” > “Surround Decoder” > “Center Image” Setting range 0.0 to 1.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the entire volume Adjusts the entire volume. This setting is effective when “All-Channel Stereo” is selected in the sound programs. Setup menu “Sound” > “All-Channel Stereo” > “Level” Setting range -5 to +5 Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the front and rear volume balance Adjusts the front and rear volume balance. Higher value enhances the front side, and lower value enhances the rear side. This setting is effective when “All-Channel Stereo” is selected in the sound programs. Setup menu “Sound” > “All-Channel Stereo” > “Front / Rear Balance” Setting range -5 to +5 Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the left and right volume balance Adjusts the left and right volume balance. Higher value enhances the right side, and lower value enhances the left side. This setting is effective when “All-Channel Stereo” is selected in the sound programs. Setup menu “Sound” > “All-Channel Stereo” > “Left / Right Balance” Setting range -5 to +5 Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the height volume balance Adjusts the height volume balance using the front presence speakers. Higher value enhances the upside, and lower value enhances the downside. This setting is effective “All-Channel Stereo” is selected in the sound programs. Setup menu “Sound” > “All-Channel Stereo” > “Height Balance” Setting range 0 to 10 NOTE The front presence speakers do not produce sounds when “Height Balance” is set to “0”.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of Monaural Mix Outputs mixed monaural sound. This setting is effective when “All-Channel Stereo” is selected in the sound programs. Setup menu “Sound” > “All-Channel Stereo” > “Monaural Mix” Settings Off Disables monaural sound output. On Enables monaural sound output. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the adjustment method of the Lipsync function Selects the method for adjusting the delay between video and audio output (Lipsync). Setup menu “Sound” > “Lipsync” > “Select” Settings Manual Adjusts the delay between video and audio output manually. The setting in “Adjustment” is applied to the audio output timing. Adjusts the delay between video and audio output automatically.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the delay of the Lipsync function Adjusts the delay between video and audio output (Lipsync) manually. Setup menu “Sound” > “Lipsync” > “Adjustment” Setting range 0 ms to 500 ms NOTE You can fine-adjust the audio output timing when “Select” in the "Setup" menu is set to “Auto”. Related links ( ( “Setting the adjustment method of the Lipsync function” (p.220) “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the volume of dialogue sound Adjusts the volume of dialogue sounds that are hardly heard. Higher value strengthens the dialogue sounds. Setup menu “Sound” > “Dialogue” > “Dialogue Level” Setting range 0 to 3 Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the volume of dialogue sound during DTS:X™ playback Adjusts the volume of dialogue sounds that are hardly heard for DTS:X content. Higher value strengthens the dialogue sounds. Setup menu “Sound” > “Dialogue” > “DTS Dialogue Control” Setting range 0 to 6 NOTE This setting is available only when DTS:X content which supports the DTS Dialogue Control feature is played back. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the perceived height of dialogue sound Adjusts the perceived height of dialogue sounds when the position (height) of dialogue sound is artificial. Bigger setting value gets the higher position. If the dialogue sounds as if it is coming from below the screen, you can raise its perceived height by increasing this setting.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the dynamic range adjustment method Selects the dynamic range (from maximum to minimum) adjustment method for Dolby Digital and DTS signals playback. Setup menu “Sound” > “Volume” > “Dynamic Range” Settings Maximum Produces audio without adjusting the dynamic range. Standard Optimizes the dynamic range for regular home use. Sets the dynamic range for clear sound even at night or at low volumes.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the limit value of the volume Sets the limit value of the volume adjusted by using such as VOLUME keys on the remote control. Setup menu “Sound” > “Volume” > “Max Volume” Setting range -60.0 dB to +15.0 dB, +16.5 dB [20.5 to 95.5, 97.0] Related links ( ( “Setting the scale of the volume display” (p.254) “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the initial volume for when the unit is turned on Sets the initial volume when the unit is turned on. Setup menu “Sound” > “Volume” > “Initial Volume” Settings Off Sets the volume level when it last entered standby mode. Mute On -80.0 dB to +16.5 dB [0.5 to 97.0] Mutes the audio output. Sets the specified volume level. This setting works only when the volume level is set lower than “Max Volume”.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting Virtual Surround Back Speaker (VSBS) Selects whether to create Virtual Surround Back Speaker (VSBS). When VSBS is enabled, the unit creates VSBS using the surround speakers even if no surround back speakers are connected. Setup menu “Sound” > “Virtual Speaker” > “VSBS” Settings Off Does not create Virtual Surround Back Speaker (VSBS). On Creates Virtual Surround Back Speaker (VSBS). NOTE ( ( VSBS is effective only when 6.1/7.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting DTS Format Notification Informs the BD player about the DTS formats that the unit supports. Setup menu “Sound” > “DTS Mode” Settings Mode 1 Mode 2 Conforms to the DTS:X standard. This setting is used normally. This setting is used if the BD player fails to properly output a DTS signal even when it is playing back DTS-HD or DTS:X content. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Configuring the scene settings Selecting items to be included as the scene assignments Selects items to be included as the scene assignments. You can also view the settings currently assigned to the selected scene. Setup menu “Scene” > “Scene Setting” 1 2 Select the SCENE name and press ENTER. Select an item and switch between “Enable” and “Disable”.
CONFIGURATIONS > Configuring various functions (Setup menu) Renaming the SCENE name Changes the SCENE name displayed on the front display or on the TV. Setup menu “Scene” > “Scene Rename” 1 2 Select the SCENE name and press ENTER to enter the name edit screen. 3 4 Select “OK”. Edit the name. Press SETUP. This completes the settings. NOTE ( ( To clear the entry, select “CLEAR”. To restore the default name, select “RESET”. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Configuring the multi zone settings Checking the zone information Displays information about zone. Setup menu “Multi Zone” > “Information” On/Off The power on/off for zone Input The input source selected for zone Volume The volume setting for zone Tone Control The tone control setting (the level of Treble and Bass) for zone Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of volume adjustments for zone output Sets volume adjustments for zone output. If you have connected an external amplifier with volume control to the unit, set this function to “Fixed”. Setup menu “Multi Zone” > (zone) > “Volume” > “Volume” Settings Fixed Disables volume adjustments for zone output. Variable Enables volume adjustments for zone output.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the zone upper limit of the volume Sets the zone upper limit of the volume adjusted by using such as VOLUME keys on the remote control. Setup menu “Multi Zone” > (zone) > “Volume” > “Max Volume” Setting range -60.0 dB to +10.0 dB [20.5 to 90.5] NOTE This setting is available only when “Volume” is set to “Variable”. Related links ( ( “Setting the use of volume adjustments for zone output” (p.233) “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the zone initial volume for when the unit is turned on Sets the zone initial volume for when the unit is turned on. Setup menu “Multi Zone” > (zone) > “Volume” > “Initial Volume” Settings Off Sets the level at the volume level when it last entered standby mode. Mute On -80.0 dB to +10.0 dB [0.5 to 90.5] Mutes the audio output. Sets the level to the specified volume level.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the volume balance for zone output Adjusts the volume balance for zone output. Higher value enhances the right side volume, and lower value enhances the left side volume. Setup menu “Multi Zone” > (zone) > “Volume” > “Left / Right Balance” Setting range -20 to +20 Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of monaural sounds for zone output Selects whether to produce monaural sounds for zone output. Setup menu “Multi Zone” > (zone) > “Sound Mode” > “Monaural” Settings Off Does not produce monaural sounds in zone. On Produces monaural sounds in zone. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of Compressed Music Enhancer for zone output Sets Compressed Music Enhancer for zone output. You can also use ENHANCER on the remote control. Setup menu “Multi Zone” > (zone) > “Sound Mode” > “Enhancer” Settings Off Disables Compressed Music Enhancer. On Enables Compressed Music Enhancer. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of Extra Bass for zone output Sets Extra Bass for zone output. If Extra Bass is enabled, you can enjoy sufficient bass sounds, regardless of the size of speakers. Setup menu “Multi Zone” > (zone) > “Sound Mode” > “Extra Bass” Settings Off Disables Extra Bass. On Enables Extra Bass. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the tone for zone output Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) for zone output. Setup menu “Multi Zone” > (zone) > “Tone Control” > “Tone Control” Settings Auto Manual Bypass Adjusts the levels of Treble and Bass automatically in synchronization with the main volume. Adjusts the level of Treble and Bass manually. The adjusting range is -6.0 to +6.0 dB.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the time deviation in relation to the Main zone Adjusts the time deviation (Audio Delay) in relation to the Main zone. Setup menu “Multi Zone” > (zone) > “Audio Delay” > “Audio Delay” Setting range 0 ms to 100 ms Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of switching to the party mode on zone Enables switching to the party mode. Setup menu “Multi Zone” > “Party Mode Set” > (target zone) Settings Disable Enable Disables switching to the party mode. Enables switching to the party mode. You can turn on/off the party mode by pressing PARTY on the remote control. NOTE When the party mode is turned on, you cannot change the settings.
CONFIGURATIONS > Configuring various functions (Setup menu) Renaming the zone name Changes the zone name displayed on the TV. Setup menu “Multi Zone” > “Zone Rename” 1 Select a zone name to be renamed. The cursor moves to the name edit screen. 2 Edit the name. 3 4 Select “OK”. Press SETUP. NOTE ( ( To clear the entry, select “CLEAR”. To restore the default name, select “RESET”. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Configuring the function settings Automatically setting the input source names Automatically sets the input source names depending on the connected external device. Setup menu “Function” > “Input Setting” > “Input Rename” > (input) 1 2 3 4 Select an input source to be renamed. Select “Auto”. To change another input source name, repeat steps 1 to 2. Press SETUP. This completes the settings.
CONFIGURATIONS > Configuring various functions (Setup menu) Manually setting the input source names Manually sets the input source names. Setup menu “Function” > “Input Setting” > “Input Rename” > (input) 1 2 3 4 5 6 7 Select an input source to be renamed. Select “Manual”. Press ENTER. Edit the name. Select “OK”. To change another input source name, repeat steps 1 to 5. Press SETUP. This completes the settings. NOTE ( ( To cancel the entry, select “CLEAR”. To restore the default name, select “RESET”.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting input sources to be skipped when operating the INPUT key Sets which input sources are skipped when operating the INPUT key. You can select the desired input source quickly by using this function. Setup menu “Function” > “Input Setting” > “Input Skip” > (input) Settings Off Does not skip the selected input source. On Skips the selected input source. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the audio input jack used for TV audio Selects an audio input jack, which connected to TV audio output, of the unit. When you switch the input source of the unit to “TV”, the playback of TV audio is as follows. ( ( Without eARC/ARC function: the TV audio is played back with the audio input jack set for TV audio in “TV Audio Input”.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting sound programs to be skipped when operating the PROGRAM keys Sets which sound programs are skipped when operating the PROGRAM keys. You can select the desired sound program quickly by using this function. Setup menu “Function” > “DSP Skip” Settings Off Does not skip the selected sound program. On Skips the selected sound program. NOTE This setting is applied separately to each sound program.
CONFIGURATIONS > Configuring various functions (Setup menu) Specifying the condition for the TRIGGER OUT jack to function Specifies the condition for the TRIGGER OUT jack functions which make the external devices synchronize with the unit. Setup menu “Function” > “Trigger Output” > “Trigger Mode” Settings Power Source Synchronizes transmitting/stopping the electronic signal with the power status of the zone specified with “Target Zone”.
CONFIGURATIONS > Configuring various functions (Setup menu) Specifying the output level of the electronic signal transmitted with each input Specifies the output level of the electronic signal transmitted with each input when “Trigger Mode” is set to “Source”. Setup menu “Function” > “Trigger Output” > “Trigger Mode” > “Source” > (input) Settings Low Stops the electronic signal transmission when you switch to the input source specified in this option.
CONFIGURATIONS > Configuring various functions (Setup menu) Switching the output level for electronic signal transmission manually Switches the output level for electronic signal transmission manually when “Trigger Mode” is set to “Manual”. This setting can be used to confirm proper function of the external device connected via the TRIGGER OUT jack. Setup menu “Function” > “Trigger Output” > “Trigger Mode” > “Manual” Settings Low Stops the electronic signal transmission.
CONFIGURATIONS > Configuring various functions (Setup menu) Specifying the zone with which the TRIGGER OUT jack functions are synchronized Specifies the zone with which the TRIGGER OUT jack functions are synchronized when “Trigger Mode” is set to “Power” or “Source”. Setup menu “Function” > “Trigger Output” > “Target Zone” Settings Main Synchronizes with the Main zone. (zone name) Synchronizes with each zone. All Synchronizes with the Main or each zone.
CONFIGURATIONS > Configuring various functions (Setup menu) Adjusting the brightness of the front display Adjusts the brightness of the following on the front panel. Higher value brightens the front display. ( Front display ( Indicators (ZONE, PURE DIRECT) Setup menu “Function” > “User Interface” > “Display Settings” > “Dimmer” Front Display menu “Dimmer” Setting range -5 to 0 NOTE ( ( ( ( ( ( The front display is turned off by “-5”. The default setting is “-2”.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the scale of the volume display Switches the scale of the volume display. Setup menu “Function” > “User Interface” > “Display Settings” > “Volume” Settings dB The “dB” unit 0-97 The numeric value (0-97) Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of short messages on the TV Selects whether to display short messages on the TV when the unit is operated. Setup menu “Function” > “User Interface” > “Display Settings” > “Short Message” Settings Off Does not display short messages. On Displays short messages. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the position of short messages Sets the position of short messages on the TV screen. Setup menu “Function” > “User Interface” > “Display Settings” > “Position” Settings Bottom Displays short messages at the bottom of the TV screen. Top Displays short messages at the top of the TV screen. NOTE This setting is available only when “Short Message” in the “Setup” menu is set to “On”.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the operation sound Selects whether to ring a sound when operating the touch key on the front panel. Setup menu “Function” > “User Interface” > “Touch Sound” Settings Off Does not output the operation sound. On Outputs the operation sound. NOTE This setting is interlocked with the setting of “Touch Sound” in the “Front Display” menu. Related links ( ( “Setting the use of the operation sound” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the functions for the color keys on the remote control Sets the functions for the RED/GREEN/YELLOW/BLUE keys on the remote control. Setup menu “Function” > “User Interface” > “Remote Color Key” Settings Default Assigns the functions of devices connected to the unit with an HDMI cable. This setting is effective when “HDMI Control” in the “Setup” menu is set to “On”. Assigns the functions of sound mode to each key.
CONFIGURATIONS > Configuring various functions (Setup menu) Preventing accidental changes to the settings Protects the settings to prevent accidental changes. Setup menu “Function” > “User Interface” > “Memory Guard” Settings Off Does not protect the settings. Protects the settings. On Change in the setting is prohibited until “Off” is selected. The lock icon (o) is displayed on the menu screen. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the amount of time for the auto-standby function Sets the amount of time for setting the unit to standby mode automatically. Setup menu “Function” > “ECO” > “Auto Power Standby” Settings Off Does not set the unit to standby mode. 5 minutes, 20 minutes Sets the unit to standby mode when you have not operated the unit and the unit has not detected any input signal for the specified time.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of the eco mode Reduces the unit’s power consumption by setting the eco mode. If this function is set to “On”, be sure to restart the unit. New setting becomes effective after a restart. Setup menu “Function” > “ECO” > “ECO Mode” Settings Off On Disables the eco mode. Enables the eco mode. The front display may become dark. NOTE If you want to play audio at high volume, set “ECO Mode” to “Off”.
CONFIGURATIONS > Configuring various functions (Setup menu) Changing the FM/AM tuning frequency setting Model For Asia, Taiwan, Brazil, General, and Central and South America Sets the FM/AM tuning frequency setting of the unit depending on your country or region. Setup menu “Function” > “Tuner” > “Frequency Step” Settings FM100/AM10 Adjusts the FM frequency by 100-kHz steps and AM by 10-kHz steps. FM50/AM9 Adjusts the FM frequency by 50-kHz steps and AM by 9-kHz steps.
CONFIGURATIONS > Configuring various functions (Setup menu) Restoring the default settings Restores the default settings for the unit (initialization). Setup menu “Function” > “Initialization” Choices All Restores the default settings for the unit. Network Restores the default settings for network configurations. 1 2 Select “All” or “Network”. Press ENTER to execute the initialization. In case of “All”, the unit will restart automatically a few seconds later.
CONFIGURATIONS > Configuring various functions (Setup menu) Backuping and restoring all the settings Informs the unit's setting to a USB flash drive and restores it to the unit. Prepare a USB flash drive using FAT16 or FAT32 format in advance. Setup menu “Function” > “Backup/Restore” Choices Backup Backups all the settings for the USB flash drive. Restore Restores all the previous backuped settings. n In case of “Backup” 1 2 Connect the USB flash drive to the USB jack on the front panel.
CONFIGURATIONS > Configuring various functions (Setup menu) If “Restore Failed” appears on the TV (“Error” on the front display), check the following and start the process again. ( Check that the file is stored in the route of the USB flash drive. NOTE ( ( ( “Restore” is effective after backuping all the settings. Do not turn off the unit during the restoring process. Otherwise, the settings may not be restored correctly.
CONFIGURATIONS > Configuring various functions (Setup menu) Updating the firmware Updates the firmware. You can also check the firmware version and system ID. Setup menu “Function” > “Firmware Update” Choices Network Update Updates the firmware via the network. USB Update Updates the firmware using a USB flash drive. NOTE ( ( ( ( ( “Network Update” is not selectable when firmware update is in preparation. Do not perform this menu unless firmware update is necessary.
CONFIGURATIONS > Configuring various functions (Setup menu) Configuring the network settings Checking the network information of the unit Displays the network information of the unit.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the network connection method (Wired/Wireless) Selects the network connection method. Setup menu “Network” > “Network Connection” Choices Wired Connects the unit to a network with a network cable. Wireless(Wi-Fi) Connects the unit to a network via the wireless router (Wi-Fi). Related links ( ( ( “Network connection of the unit” (p.76) “Selecting a wireless network connection method” (p.356) “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the network parameters automatically (DHCP) Sets the network parameters (such as IP address, Subnet Mask, and Default Gateway) automatically using a DHCP server. Setup menu “Network” > “IP Address” > “DHCP” Settings Off On Does not use a DHCP server. You can configure the network parameters manually. Uses a DHCP server. The unit’s network parameters are configured automatically. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the network parameters manually Sets the network parameters (such as IP address, Subnet Mask, and Default Gateway) manually. Setup menu “Network” > “IP Address” 1 2 3 4 5 6 Set “DHCP” to “Off”. Select a parameter type. Set the network parameter. Press ENTER. To set another parameter, repeat steps 2 to 4. Press SETUP. This completes the settings. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of a Digital Media Controller Selects whether to allow a Digital Media Controller (DMC) to control playback. If this function is enabled, you can control playback of the unit from DMCs on the same network. Setup menu “Network” > “DMC Control” Settings Disable Does not allow DMCs to control playback. Enable Allows DMCs to control playback. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of the Network Standby function Selects whether the unit can be turned on from other network devices. Setup menu “Network” > “Network Standby” Settings Off On Disables the network standby function. Enables the network standby function. The unit consumes more power than when “Off” is selected. Enables the network standby function.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the network name of the unit Edits the unit’s name on the network (the network name) displayed on other network devices. Setup menu “Network” > “Network Name” 1 2 3 4 Press ENTER. Edit the name. Select “OK”. Press SETUP. This completes the settings. NOTE ( ( To clear the entry, select “CLEAR”. To restore the default network name, select “RESET”. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the power interlock from the unit to MusicCast compatible devices Selects whether turning on the power of the unit (the master device) also turns on the power of other devices (the slave device) of the MusicCast network. Setup menu “Network” > “MusicCast Link Power Interlock” Settings Off Disables the power interlock from the unit to MusicCast compatible devices.
CONFIGURATIONS > Configuring various functions (Setup menu) Configuring the Bluetooth® settings Setting the use of Bluetooth® Selects whether to use the Bluetooth function. Setup menu “Bluetooth” > “Bluetooth” Settings Off Disables the Bluetooth function. On Enables the Bluetooth function. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Terminating the connection between a Bluetooth® device and the unit Terminates the Bluetooth connection between a Bluetooth device (such as a smartphone) and the unit. Select “Disconnect” and press ENTER to terminate the Bluetooth connection. Setup menu “Bluetooth” > “Audio Receive” > “Disconnect” NOTE This setting is not available when no Bluetooth devices are connected. Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of the Bluetooth® Standby function Selects whether to turn on the unit from Bluetooth devices. If this function is set to “On”, the unit automatically turns on when a connect operation is performed on the Bluetooth device. Setup menu “Bluetooth” > “Audio Receive” > “Bluetooth Standby” Settings Off On Disables the Bluetooth standby function. Enables the Bluetooth standby function.
CONFIGURATIONS > Configuring various functions (Setup menu) Setting the use of audio transmission to a Bluetooth® device Selects whether to transmit audio played back on the unit to Bluetooth devices (such as speakers and headphones). Setup menu “Bluetooth” > “Audio Send” > “Transmitter” Settings Off Disables the Bluetooth audio transmitter function. On Enables the Bluetooth audio transmitter function. Related links ( ( “Connecting the unit to a Bluetooth® device that receives transmitted audio” (p.
CONFIGURATIONS > Configuring various functions (Setup menu) Connecting the unit to a Bluetooth® device that receives transmitted audio Establishes a connection between the unit and Bluetooth devices (such as speakers and headphones) that receive audio transmitted from the unit when "Transmitter" is set to "On" in the "Setup" menu. Setup menu “Bluetooth” > “Audio Send” > “Device Search” 1 2 3 4 Confirm the message and press ENTER. Select the list.
CONFIGURATIONS > Configuring various functions (Setup menu) Configuring the language settings Setting the menu language Selects the menu language such as the Setup menu. Setup menu “Language” Settings English English 日本語 Japanese Français French Deutsch German Español Spanish Русский Russian Italiano Italian 中文 Chinese Related links “Basic operation of the Setup menu” (p.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Configuring the unit’s settings by operation of the body front panel (Front Display menu) Basic operation of the Front Display menu Perform the following basic procedure to operate the “Front Display” menu. Operate this menu displayed on the front display using the front panel. 1 Touch MENU (CONNECT) on the front panel. SELECT/ENTER RETURN 2 MENU (CONNECT) Select an item by using SELECT/ENTER.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Front Display menu items Use the following table to configure system settings of the unit.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Adjusting the brightness of the front display Adjusts the brightness of the following on the front panel. Higher value brightens the front display. ( Front display ( Indicators (ZONE, PURE DIRECT) Setup menu “Function” > “User Interface” > “Display Settings” > “Dimmer” Front Display menu “Dimmer” Setting range -5 to 0 NOTE ( ( ( ( ( ( ( The front display is turned off by “-5”.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Setting the power of each zone to on/standby Switches the power of the zone to be operated between on and off (standby). Front Display menu “Zone Power” > (zone) Settings Off Turns off the zone. On Turns on the zone. Related links “Basic operation of the Front Display menu” (p.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Setting the use of the volume on the front panel This feature can be used if the firmware is updated. Selects whether to use the volume on the front panel. You can disable the volume operation on the unit to prevent the volume from being set unexpectedly loud by a child. Front Display menu “Settings” > “Function Lock” > “Volume Knob Lock” Settings Off Enables the volume operation on the unit.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Setting the use of the input selector on the front panel This feature can be used if the firmware is updated. Selects whether to use SELECT/ENTER on the front panel as the input selector. Front Display menu “Settings” > “Function Lock” > “Input Selector Lock” Settings Off Enables the input selection operation of SELECT/ENTER on the unit.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Setting the use of the scene key on the front panel This feature can be used if the firmware is updated. Selects whether to use SCENE (4 numbers) on the front panel. Front Display menu “Settings” > “Function Lock” > “Scene Key Lock” Settings Off Enables the operation of SCENE on the unit. On Disables the operation of SCENE on the unit. Related links “Basic operation of the Front Display menu” (p.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Setting the use of the operation sound Selects whether to ring a sound when operating the touch key on the front panel. Front Display menu “Settings” > “Touch Sound” Settings Off Does not output the operation sound. On Outputs the operation sound. NOTE This setting is interlocked with the setting of “Touch Sound” in the “Setup” menu. Related links ( ( “Setting the operation sound” (p.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Setting the use of the remote control Selects whether to use the remote control sensor on the front panel. Front Display menu “Settings” > “Remote Sensor” Settings Off Turns off the remote control sensor. On Turns on the remote control sensor. NOTE ( ( While the remote control sensor is turned off, you cannot control the unit from the remote control. Set this function to “On” normally.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Selecting the remote control ID Sets the unit’s remote control ID so that it matches the remote control’s ID. When using multiple Yamaha AV receivers, set a unique remote control ID for its corresponding receiver.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Setting information items to be skipped when operating SELECT/ENTER Sets which information items are skipped when operating SELECT/ENTER on the front panel. You can select the desired information quickly by using this function to skip the unnecessary information. Front Display menu “Settings” > “Information Skip” > (information item) Settings Off Does not skip the selected information item.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Restoring the default settings Restores the default settings for the unit (initialization). Front Display menu “Settings” > “Initialization” Choices All Initialization Restores the default settings for the unit. Network Initialization Restores the default settings for network configurations. 1 2 Select “All Initialization” or “Network Initialization”. Select “Execute”.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Backuping and restoring all the settings Informs the unit's setting to a USB flash drive and restores it to the unit. Prepare a USB flash drive using FAT16 or FAT32 format in advance. Front Display menu “Settings” > “Backup/Restore” Choices Backup Backups all the settings for the USB flash drive. Restore Restores all the previous backuped settings.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) 3 Select “Execute”. In process, “Executing” is displayed on the front display. And “Restore Executing” is displayed on the TV. When the process finishes, “Complete” is displayed (“Restore Complete” on the TV). The unit will restart automatically a few seconds later. If “Error” appears on the front display (“Restore Failed” on the TV), check the following and start the process again.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Updating the firmware Updates the firmware that provides additional features or product improvements. New firmware can be downloaded from our website. For details, refer to the information supplied with updates. Front Display menu “Settings” > “Firmware Update” Choices Network Update Updates the firmware via the network. USB Update Updates the firmware using a USB flash drive.
CONFIGURATIONS > Configuring the unit’s settings by operation of the body front panel (Front Display menu) Setting the use of Retail Demo Mode This feature can be used if the firmware is updated. Selects whether to use Retail Demo Mode of the front display. In Retail Demo Mode, the feature of the unit and QR code are displayed on the front display. When you scan the QR code with your smartphone, you can read the introduction page of the unit.
UPDATE > Updating the unit’s firmware UPDATE Updating the unit’s firmware Firmware updates New firmware that provides additional features or product improvements will be released as needed. For details on firmware, visit the Yamaha website. The unit’s firmware can be updated via the network or using a USB flash drive. n When the unit is connected to the Internet If a firmware update is ready, the firmware update indicator on the front display lights up.
UPDATE > Updating the unit’s firmware Updating the unit’s firmware via the network When the unit is connected to the Internet and a firmware update is ready, the following message appears after SETUP is pressed. You can switch the language. Confirm the message and start the firmware update via the network. NOTICE ( Do not operate the unit or disconnect the power cable or network cable during firmware update. If the firmware update is interrupted, there is a possibility that the unit will malfunction.
UPDATE > Updating the unit’s firmware The procedure for reservation is as follows. 1 2 Press not ENTER but the down cursor key in previous step 2. On the next screen, press ENTER. The firmware update is reserved. With an update reservation, the firmware update confirmation screen is displayed on the front display when you turn off the unit. Press ENTER on the front panel or on the remote control to start the firmware update. After the firmware update is complete, the unit will turn off automatically.
UPDATE > Updating the unit’s firmware Updating the unit’s firmware using a USB flash drive If the unit is not connected to the Internet, or the Internet connection speed is slow, update the firmware using the USB flash drive. For details on downloads and firmware updates, visit the Yamaha website. NOTICE ( Do not operate the unit or disconnect the power cable or network cable during firmware update. If the firmware update is interrupted, there is a possibility that the unit will malfunction.
TROUBLESHOOTING > When any problem appears TROUBLESHOOTING When any problem appears If trouble occurs, first check the following: Make sure of the following when the unit does not function properly. ( The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely. ( The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on. ( The connectors of each cable are securely inserted in to jacks on each device.
TROUBLESHOOTING > When any problem appears Power, system, or remote control trouble The power does not turn on ( The protection circuitry has been activated three times consecutively. If the standby indicator on the unit blinks when you try to turn on the power, it means that capability to turn on the power is disabled as a safety precaution. Contact your nearest Yamaha dealer or service center to request repair.
TROUBLESHOOTING > When any problem appears The power does not turn on in synchronization with the TV ( HDMI Control on the unit is disabled. If turning off the unit is not synchronized to the TV either, check the setting of HDMI Control on the unit. For details on HDMI Control, see the following: “Setting the use of HDMI Control” (p.201) ( ( HDMI Control on the TV is disabled. If only turning on the unit is not synchronized to the TV, check the setting on the TV.
TROUBLESHOOTING > When any problem appears The power does not turn off ( The internal microcomputer has frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 15 seconds to reboot the unit. If the problem persists, disconnect the power cable from the AC wall outlet and plug it again.
TROUBLESHOOTING > When any problem appears The power turns off (standby mode) immediately ( The unit was turned on while a speaker cable was shorted. Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers. For details, see the following: “Connecting the speaker” (p.
TROUBLESHOOTING > When any problem appears The unit enters standby mode automatically ( The sleep timer worked. Turn on the unit and start playback again. ( The auto-standby function activated because the unit was not used for the specified time. To disable the auto-standby function, set “Auto Power Standby” in the “Setup” menu to “Off”. For details, see the following: “Setting the amount of time for the auto-standby function” (p.260) ( ( The speaker impedance setting is incorrect.
TROUBLESHOOTING > When any problem appears The unit is not reacting ( The internal microcomputer is frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 15 seconds to reboot the unit. If the problem persists, disconnect the power cable from the AC wall outlet and plug it again. ( The volume operation on the front panel is disabled.
TROUBLESHOOTING > When any problem appears The unit cannot be controlled using the remote control ( The unit is out of the operating range. Use the remote control within the operating range. For details, see the following: “Operating range of the remote control” (p.13) ( ( The batteries are weak. Replace with new batteries. ( The unit’s remote control sensor is exposed to direct sunlight or strong lighting. Adjust the lighting angle, or reposition the unit.
TROUBLESHOOTING > When any problem appears Cannot select the desired input source even if “INPUT” is pressed ( The function which skips some input sources is set. Set “Input Skip” of the desired input source in the “Setup” menu to “Off”. For details, see the following: “Setting input sources to be skipped when operating the INPUT key” (p.
TROUBLESHOOTING > When any problem appears The device connected to the unit via HDMI cannot be controlled using the RED/GREEN/YELLOW/BLUE keys of the remote control ( The device which is connected to the unit via HDMI does not support the operation of the RED/ GREEN/YELLOW/BLUE keys. Use a device which supports the operation of the RED/GREEN/YELLOW/BLUE keys. ( The settings of the RED/GREEN/YELLOW/BLUE keys of the unit's remote control have been changed.
TROUBLESHOOTING > When any problem appears The front display is turned off ( The brightness of the front display is set to be turned off. Set “Dimmer” in the “Front Display” menu or “Setup” menu to bigger than “-5”. For details, see the following: “Adjusting the brightness of the front display” (p.
TROUBLESHOOTING > When any problem appears Audio trouble No sound ( Another input source is selected. Select an appropriate input source with the input selection keys. For details, see the following: “Basic procedure for playing back video and music” (p.118) ( ( Signals that the unit cannot reproduce are being input. Some digital audio formats cannot be played back on the unit. Ensure that the signals are types that the unit is able to play back.
TROUBLESHOOTING > When any problem appears The volume cannot be increased ( The maximum volume is set too low. Use “Max Volume” in the “Setup” menu to adjust the maximum volume. For details, see the following: “Setting the limit value of the volume” (p.226) ( ( A device connected to the output jacks of the unit is not turned on. Turn on all devices connected to the output jacks of the unit.
TROUBLESHOOTING > When any problem appears No sound is coming from a specific speaker ( The playback source does not contain a signal for the channel. To check it, display information about the current audio signal on the TV. For details, see the following: “Checking the audio signal information” (p.167) ( ( The currently selected sound program/decoder does not use the speaker. To check it, use “Test Tone” in the “Setup” menu. For details, see the following: “Outputting test tones” (p.
TROUBLESHOOTING > When any problem appears No sound is coming from the subwoofer ( The playback source does not contain Low Frequency Effect (LFE) or low-frequency signals. To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the front channel lowfrequency components from the subwoofer. For details, see the following: “Setting the use of Extra Bass” (p.194) ( ( Subwoofer output is disabled. Perform YPAO or set “Subwoofer” in the “Setup” menu to “Use”.
TROUBLESHOOTING > When any problem appears No sound from the playback device connected to the unit with HDMI ( The TV does not support HDCP (High-bandwidth Digital Content Protection). Refer to the instruction manuals for the TV and check the TV’s specifications. ( The number of devices connected to the HDMI OUT jack exceeds the limit. Disconnect some of the HDMI devices.
TROUBLESHOOTING > When any problem appears No sound from the playback device when HDMI Control is used ( The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the playback device audio is output from the speakers connected to the unit. ( TV audio is selected as the input source. Select an appropriate input source with the input selection keys.
TROUBLESHOOTING > When any problem appears No sound from the TV when HDMI Control is used ( The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the TV audio is output from the speakers connected to the unit. ( A TV that does not support eARC/ARC is connected to the unit only with an HDMI cable. Use a digital optical cable to make an audio connection. For details, see the following: “HDMI connection with a TV” (p.
TROUBLESHOOTING > When any problem appears Any other device's audio is played back when you switch the input source of the unit to “TV” ( The eARC/ARC function is not used. Audio is played back with the audio input jack selected in “TV Audio Input” in the “Setup” menu unless the TV audio is played back with eARC/ARC function. It is not a malfunction.
TROUBLESHOOTING > When any problem appears Only the front speakers work on multichannel audio ( The currently selected sound program is “2ch Stereo”. Select the sound program other than “2ch Stereo”. For details, see the following: “Enjoying sound field effects optimized for the type of content” (p.
TROUBLESHOOTING > When any problem appears Noise/hum is heard ( The unit is too close to another digital or radio frequency device. Move the unit further away from the device. ( The cable connecting the unit and playback device is broken. If there is no problem with the connection, replace with another cable.
TROUBLESHOOTING > When any problem appears The sound is distorted ( A device (such as an external power amplifier) connected to the unit’s audio output jacks is not turned on. Turn on all devices connected to the unit’s audio output jacks. ( The volume of the unit is too high. Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to “Off”. For details, see the following: “Setting the use of the eco mode” (p.
TROUBLESHOOTING > When any problem appears Video trouble No video ( Another input source is selected on the unit. Select an appropriate input source with the input selection keys. ( Another input source is selected on the TV. Switch the TV input to display the video from the unit. ( The video signal output from the unit is not supported by the TV. Check the video output setting of the playback device. For information about video signals supported by the TV, refer to the instruction manuals for the TV.
TROUBLESHOOTING > When any problem appears No video from the playback device connected to the unit with HDMI ( The input video signal (resolution) is not supported by the unit. To check the information about the current video signal (resolution) and video signals supported by the unit, see the following: “Checking the video signal information” (p.168) ( ( The TV does not support HDCP (High-bandwidth Digital Content Protection). Refer to the instruction manuals for the TV and check the TV’s specifications.
TROUBLESHOOTING > When any problem appears No image (contents required the HDCP 1.4/2.3 - compatible HDMI device) from the playback device ( The TV (HDMI input jack) does not support HDCP 1.4/2.3. Connect the unit to the TV (HDMI input jack) that supports HDCP 1.4/2.3. (The Warning message can be displayed on the TV screen.
TROUBLESHOOTING > When any problem appears The “Option” menu or “Setup” menu is not displayed on the TV ( Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack). ( The Pure Direct is enabled. Press PURE DIRECT to disable the Pure Direct. For details, see the following: “Enjoying pure high fidelity sound (Pure Direct)” (p.
TROUBLESHOOTING > When any problem appears FM/AM radio trouble FM radio reception is weak or noisy ( There is multi-path interference. Adjust the FM antenna height or orientation, or place it in a different location. ( Your area is too far from the FM station transmitter. Press MODE on the remote control to select monaural FM radio reception.
TROUBLESHOOTING > When any problem appears AM radio reception is weak or noisy ( The noises may be caused by fluorescent lamps, motors, thermostats, or other electrical equipment. It is difficult to completely eliminate noise. It may be reduced by using an outdoor AM antenna.
TROUBLESHOOTING > When any problem appears Radio stations cannot be selected automatically ( Your area is too far from the FM station transmitter. Select the station manually. Or use an outdoor antenna. We recommend using a sensitive multi-element antenna. For details on selecting the station manually, see the following: “Listening to the radio” (p.127) ( ( The AM radio signal is weak. Adjust the AM antenna orientation. Select the station manually. Use an outdoor AM antenna.
TROUBLESHOOTING > When any problem appears AM radio stations cannot be registered as presets ( Auto Preset has been used. Auto Preset is for registering FM radio stations only. Register AM radio stations manually. For details, see the following: “Registering a radio station manually” (p.
TROUBLESHOOTING > When any problem appears Radio stations cannot be selected by pressing PRESET ( No radio stations are registered. When no radio stations are registered, “No Presets” appears on the front display by pressing PRESET. Register the radio station to the preset number. For details, see the following: “Registering a radio station manually” (p.130) You can also register FM radio stations with strong signals automatically (Auto Preset).
TROUBLESHOOTING > When any problem appears DAB radio trouble No DAB radio reception ( An initial scan has not been performed. Perform an initial scan to receive DAB radio. For details, see the following: “Preparing the DAB tuning” (p.
TROUBLESHOOTING > When any problem appears No DAB radio reception even after performing an initial scan ( Reception strength of DAB radio is poor. Check reception strength in Tune AID displayed on the front panel, and adjust the antenna height or orientation, or place it in a different location. For details, see the following: “Preparing the DAB tuning” (p.125) ( ( There is no DAB coverage in your area. Check with your dealer or WorldDMB online at “http://www.worlddab.
TROUBLESHOOTING > When any problem appears DAB radio reception is weak or noisy ( There is multi-path interference. Check reception strength in Tune AID displayed on the front panel, and adjust the antenna height or orientation, or place it in a different location. For details, see the following: “Preparing the DAB tuning” (p.125) ( ( Your area is too far from the DAB station transmitter. Use an outdoor antenna. We recommend using a sensitive multi-element antenna.
TROUBLESHOOTING > When any problem appears DAB information is not available or is inaccurate ( The selected DAB radio station may be temporarily out of service or may not provide information. Contact the DAB broadcaster.
TROUBLESHOOTING > When any problem appears No DAB radio sound ( The selected DAB radio station may be temporarily out of service. Try the station later or select another station.
TROUBLESHOOTING > When any problem appears USB trouble The unit does not detect the USB flash drive ( The USB flash drive is not connected to the USB jack securely. Turn off the unit, reconnect your USB flash drive, and turn the unit on again. ( The file system of the USB flash drive is not FAT16 or FAT32. Use a USB flash drive with FAT16 or FAT32 format.
TROUBLESHOOTING > When any problem appears Folders and files in the USB flash drive cannot be viewed. ( The data in the USB flash drive is protected by the encryption. Use a USB flash drive without an encryption function.
TROUBLESHOOTING > When any problem appears The registered content in the USB flash drive cannot be recalled by pressing PRESET ( A USB flash drive different from registration is connected to the unit. Connect the USB flash drive which contains the registered content as shortcut to the unit. ( The registered content (file) has been moved to another location. Register the content again. ( Some music files have been added or deleted to or from the folder.
TROUBLESHOOTING > When any problem appears The unit does not perform continuous playback on files of USB flash drive ( When the unit detects a series of unsupported files during playback, playback stops automatically. Do not save unsupported files (such as images and hidden files) in folders for playback. ( Over 500 music files are in the selected folder. The maximum limits of the unit's shuffle setting for playback are 500 music files.
TROUBLESHOOTING > When any problem appears Network trouble The network feature does not function ( The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on your router and set “DHCP” in the “Setup” menu to “On” on the unit. For details, see the following: “Setting the network parameters automatically (DHCP)” (p.
TROUBLESHOOTING > When any problem appears The unit cannot connect to the Internet via a wireless router (access point) ( The wireless router (access point) is turned off. Turn on the wireless router. ( The unit and the wireless router (access point) are too far apart. Place the unit and the wireless router (access point) closer to each other. ( There is an obstacle between the unit and the wireless router (access point).
TROUBLESHOOTING > When any problem appears Wireless network is not found ( Microwave ovens or other wireless devices in your neighborhood might disturb the wireless communication. Turn off these devices or move the unit and the wireless router (access point) away from them. If your wireless router supports 5 GHz band, establish a new connection in 5 GHz band. ( Access to the network is restricted by the firewall settings of the wireless router (access point).
TROUBLESHOOTING > When any problem appears The unit does not detect the media server (PC/NAS) ( The media sharing setting is not correct. Configure the sharing setting and select the unit as a device to which music contents are shared. ( Some security software installed on your media server is blocking the access of the unit to your media server. Check the settings of security software installed on your media server. ( The unit and media server are not in the same network.
TROUBLESHOOTING > When any problem appears The files in the media server (PC/NAS) cannot be viewed or played back ( The files are not supported by the unit or the media server. Use the file format supported by both the unit and the media server. For information about the file formats supported by the unit, see the following: “Supported file formats” (p.
TROUBLESHOOTING > When any problem appears The registered content in the media server (PC/NAS) cannot be recalled by pressing PRESET ( The media server (PC/NAS) is turned off. Turn on the media server which contains the registered content. ( The media server (PC/NAS) is not connected to the network. Check the network connections and your router settings. ( The registered content (file) has been moved to another location. Register the content again.
TROUBLESHOOTING > When any problem appears The Internet radio cannot be played ( The unit is not connected to the Internet. To use an Internet radio station, the unit must be connected to the Internet. Check whether the network parameters (such as the IP address) are properly assigned to the unit. For details, see the following: “Checking the network information of the unit” (p.267) ( ( The selected Internet radio station is currently not available.
TROUBLESHOOTING > When any problem appears The iPhone does not recognize the unit when using AirPlay ( The unit is connected to a multiple SSID router. Access to the unit might be restricted by the network separation function on the router. Connect the iPhone to the SSID which can access the unit. (Connect it to the Primary SSID at the top of the list.
TROUBLESHOOTING > When any problem appears Unable to play back music with AirPlay ( The unit cannot play back the songs stored on the iPhone. Check the song data. If it cannot be played on the iPhone itself, the song data or storage area may be broken.
TROUBLESHOOTING > When any problem appears The application for mobile devices does not detect the unit ( The unit and mobile device are not in the same network. Check the network connections and your router settings, and then connect the unit and mobile device to the same network. ( The unit is connected to a multiple SSID router. Access to the unit might be restricted by the network separation function on the router. Connect the iPhone to the SSID which can access the unit.
TROUBLESHOOTING > When any problem appears Firmware update via the network is failed ( It may not be possible depending on the condition of the network. Update the firmware via the network again or use a USB flash drive. For details, see the following: “Updating the firmware” (p.
TROUBLESHOOTING > When any problem appears Bluetooth® trouble A Bluetooth® connection cannot be established ( The wireless antennas on the rear panel of the unit does not stand upright. Stand the wireless antennas upright for connecting to a Bluetooth device wirelessly. ( The Bluetooth function of the unit is disabled. Enable the Bluetooth function. For details, see the following: “Setting the use of Bluetooth®” (p.275) ( ( The Bluetooth function of a Bluetooth device is turned off.
TROUBLESHOOTING > When any problem appears No sound is produced, or the sound is interrupted during playback with Bluetooth® connection ( The volume of the Bluetooth device is set too low. Turn up the volume of the Bluetooth device. ( The Bluetooth device is not set to send audio signals to the unit. Switch the audio output of the Bluetooth device to the unit. ( The Bluetooth connection has been terminated. Establish a Bluetooth connection between the Bluetooth device and the unit again.
TROUBLESHOOTING > Error indications on the front display Error indications on the front display Error indications on the front display Refer to the following table when the error message is indicated on the front display. Message Cause Remedy Check SP Wires The speaker cables are short circuited. Twist the bare wires of the cables firmly and connect to the unit and speakers properly. For details, see the following: ( “Connecting the speaker” (p.
APPENDIX > Care and cleaning APPENDIX Care and cleaning Care for the front panel The way of care for the front panel is as follows. ( ( ( Wipe the front panel with a soft dry cloth. Do not wipe the surface hard. Failure to observe this may cause damage to the surface. Before you clean the front panel, be sure to turn off (standby) the power to the unit. In standby mode, hold down SELECT/ENTER to disable the touch panel operation so that you can prevent the unit from turning on carelessly.
APPENDIX > Connecting to a network wirelessly Connecting to a network wirelessly Selecting a wireless network connection method Select a wireless connection method according to your network environment. 1 2 3 4 Press SETUP. Select “Network”. Select “Network Connection”. Select “Wireless(Wi-Fi)”. The following connection methods are available. ( “Setting up a wireless connection using the WPS button” (p.357) ( “Setting up a wireless connection using an iPhone” (p.
APPENDIX > Connecting to a network wirelessly Setting up a wireless connection using the WPS button You can easily set up a wireless connection with one push of the WPS button on the wireless router. Setup menu “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Select “WPS Button”. According to the on-screen guidance, connect to the network wirelessly. When the connection process finishes, “Completed” appears on the TV.
APPENDIX > Connecting to a network wirelessly Setting up a wireless connection using an iPhone You can set up a wireless connection by applying the connection settings on iPhone. Before proceeding, confirm that your iPhone is connected to a wireless router. NOTE You need iPhone with iOS 7 or later. Setup menu “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Select “WAC(iOS)”. According to the on-screen guidance, connect to the network wirelessly.
APPENDIX > Connecting to a network wirelessly Setting up a wireless connection by selecting from the list of available access points You can set up a wireless connection by selecting an access point from the list of wireless LAN routers found by the unit. You need to manually enter the security key. Setup menu “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Select “Access Point Scan”. According to the on-screen guidance, connect to the network wirelessly.
APPENDIX > Connecting to a network wirelessly Setting up a wireless connection manually You can set up a wireless connection by entering the required information manually. You need to set up the SSID (network name), encryption method and security key for your network. Setup menu “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Select “Manual Setting”. According to the on-screen guidance, connect to the network wirelessly. When the connection process finishes, “Completed” appears on the TV.
APPENDIX > Connecting to a network wirelessly Setting up a wireless connection using the WPS PIN code You can set up a wireless connection by entering the unit’s PIN code into the wireless router. The method is available if the wireless router supports the WPS PIN code method. Setup menu “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Select “PIN Code”. According to the on-screen guidance, connect to the network wirelessly. When the connection process finishes, “Completed” appears on the TV.
APPENDIX > Using front presence speakers Using front presence speakers Front presence speaker layout The following three layout patterns are available for the front presence speakers. Choose a layout pattern that suits your listening environment. ( Front Height ( Overhead ( Dolby Enabled SP NOTE ( ( You can enjoy Dolby Atmos, DTS:X or CINEMA DSP 3D with any layout pattern.
APPENDIX > Using front presence speakers Installing the front presence speakers in Front Height position Install the front presence speakers on the front wall (Front Height). It delivers a natural sound field with excellent linkage of left, right, top and bottom sound spaces, and sound extensity effectively.
APPENDIX > Using front presence speakers Installing the front presence speakers in Overhead position Install the front presence speakers to the ceiling above the listening position (Overhead). It delivers realistic overhead sound effects and sound field with excellent linkage of front and rear sound spaces effectively. CAUTION ( Be sure to use speakers that are made for ceiling use and take anti-drop measures. Ask a qualified contractor or dealer personnel for installation works.
APPENDIX > Using front presence speakers Using Dolby Enabled speakers as the front presence speakers Use Dolby Enabled speakers as the front presence speakers. This utilizes sound reflected from ceiling and lets you enjoy overhead sound only from speakers that are placed at the same level as traditional speakers. For details, refer to the instruction manual for the Dolby Enabled speakers. NOTE ( ( Place the Dolby Enabled speakers on top of or near the traditional front speakers.
APPENDIX > Supported devices and file formats Supported devices and file formats Supported Bluetooth® devices The following Bluetooth devices can be used by the unit. ( Bluetooth devices that support A2DP can be used. ( Operation of all Bluetooth devices cannot be guaranteed.
APPENDIX > Supported devices and file formats Supported USB devices The following USB devices can be used by the unit. ( This unit is compatible with USB memory devices that are in FAT16 or FAT32 format. Do not connect any other type of USB devices. ( USB devices with encryption cannot be used. ( Operation of all USB devices cannot be guaranteed.
APPENDIX > Supported devices and file formats Supported file formats The following file formats can be used by the unit. File Sampling frequency (kHz) Quantization bits Bitrate (kbps) (bit) Number of channels Support for gapless playback 32/44.1/48/ 88.2/96/ 176.4/192/384 16/24/32 - 2 , MP3 32/44.1/48 - 8 to 320 2 - WMA 32/44.1/48 - 8 to 320 2 - MPEG-4 AAC 32/44.1/48 - 8 to 320 2 - FLAC 32/44.1/48/ 88.2/96/ 176.4/192/384 16/24 - 2 , ALAC 32/44.1/48/ 88.
APPENDIX > Trademarks Trademarks Trademarks The trademarks used in this manual are as follows. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Dolby Vision, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc.
APPENDIX > Trademarks The Wi-Fi CERTIFIED™ Logo and Wi-Fi Protected Setup are certification marks of Wi-Fi Alliance®. Wi-Fi, Wi-Fi CERTIFIED, Wi-Fi Protected Setup and WPA2 are registered trademarks of Wi-Fi Alliance®. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. The unit supports DAB/DAB+ tuning. “SILENT CINEMA” is a trademark of Yamaha Corporation.
APPENDIX > Specifications Specifications Specifications The specifications of this unit are as follows. Input jacks Analog Audio ( Audio x 4 (including PHONO) Digital Audio ( Optical x 1 (Supported frequencies: 32 kHz to 96 kHz) ( Coaxial x 1 (Supported frequencies: 32 kHz to 192 kHz) HDMI Input ( HDMI x 7 Other jacks ( USB x 1 (USB2.
APPENDIX > Specifications Video Format (Repeater Mode) ( VGA ( 480i/60 Hz ( 576i/50 Hz ( 480p/60 Hz ( 576p/50 Hz ( 720p/60 Hz, 50 Hz ( 1080i/60 Hz, 50 Hz ( 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz ( 4K/60Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz Audio Format ( Dolby Atmos ( Dolby TrueHD ( Dolby Digital Plus ( Dolby Digital ( DTS:X ( DTS-HD Master Audio ( DTS-HD High Resolution ( DTS Express ( DTS ( DSD 2-ch to 6-ch (2.8 MHz) ( PCM 2-ch to 8-ch (Max. 192 kHz/24-bit) Content Protection: HDCP 1.4/2.
APPENDIX > Specifications Bluetooth Sink Function ( Source Device to AVR (ex. Smartphone/Tablet) ( Supported profile A2DP, AVRCP ( Supported codec SBC, AAC ( ( Source Function ( AVR to Sink Device (ex. Bluetooth Headphone) ( Supported profile A2DP, AVRCP ( Supported codec SBC ( Capable of Play/Stop Operation from Sink Device ( ( Bluetooth version ( Ver. 4.
APPENDIX > Specifications Post Decoding Format ( Dolby Surround ( DTS Neo: 6 Music, DTS Neo: 6 Cinema ( Neural:X Audio Section Rated Power Output (2-channel driven) (20 Hz to 20 kHz, 0.06% THD, 8 Ω) Front L/R, Surround L/R, Surround Back L/R 100 W/ch ( ( Center 100 W (1 kHz, 0.9% THD, 8 Ω) Front L/R, Surround L/R, Surround Back L/R 105 W/ch ( ( Center 105 W Power Output (1-channel driven) (1 kHz, 0.9% THD, 8 Ω) Front L/R, Center, Surround L/R, Surround Back L/R 125 W (1 kHz, 0.
APPENDIX > Specifications Headphone Impedance 16 Ω or more Frequency Response ( AUDIO 3 etc. to Front (Pure Direct) (10 Hz to 100 kHz) +0/-3 dB RIAA Equalization Deviation ( PHONO (20 Hz to 20 kHz) 0±0.5 dB Total Harmonic Distortion ( PHONO to PRE OUT (Pure Direct) (1 kHz, 1 V) 0.02% or less ( AUDIO 3 etc. to Front (Pure Direct) (20 Hz to 20 kHz, 50 W, 8 Ω) 0.04% or less Signal to Noise Ratio (IHF-A Network) ( PHONO (Pure Direct) (Input 1 kΩ Shorted, Speaker Out) ( AUDIO 3 etc.
APPENDIX > Specifications FM Section Tuning Range ( ( ( [U.S.A. and Canada models] 87.5 MHz to 107.9 MHz [Asia, Taiwan, Brazil, Central and South America and General models] 87.5/87.50 MHz to 108.0/108.00 MHz [Other models] 87.50 MHz to 108.00 MHz 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.) ( Monaural 3 μV (20.8 dBf) Signal to Noise Ratio (IHF) ( Monaural 69 dB ( Stereo 68 dB Harmonic Distortion (IHF, 1 kHz) ( Monaural 0.5% ( Stereo 0.
APPENDIX > Specifications General Power Supply ( ( [U.S.A. and Canada models] AC 120 V, 60 Hz [Taiwan, Brazil and Central and South America models] AC110 to 120 V, 60 Hz ( [China model] AC 220 V, 50 Hz ( [Korea model] AC 220 V, 60 Hz ( [Australia model] AC 240 V, 50 Hz ( [U.K.
APPENDIX > Default settings Default settings Default settings of the Option menu The default settings of the “Option” menu are as follows. YPAO Volume ( YPAO Volume Off ( Adaptive DRC Off DSP/Surround ( Adaptive DSP Level ( Enhancer On ( HDMI 1-7, AUDIO 1-5, TV Off ( Others On Volume Trim ( Input Trim 0.0 dB ( Subwoofer Trim 0.
APPENDIX > Default settings Default settings of the Setup menu The default settings of the “Setup” menu are as follows. Speaker Power Amp Assign Basic Configuration ( Subwoofer ( Front Use Small ( Center Small ( Surround Small ( Surround Back None ( Front Presence Small ( Layout ( Crossover ( Subwoofer Phase Front Height 80 Hz Normal ( Extra Bass Off ( Virtual CINEMA FRONT Off Distance 3.00 m (10.0 ft) Level 0.
APPENDIX > Default settings Standby Sync Auto ARC On HDMI Video Format ( HDMI 1-7 Mode 1 Sound Treble, Bass Bypass (0.0 dB) Tone Control * When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears. DSP Parameter - Surround Decoder ( Surround Decoder ( Center Spread Auto Off ( Center Image 0.
APPENDIX > Default settings DTS Mode Mode 1 Scene Scene Setting - Scene Rename - Multi Zone Information - Zone2 ( ( Volume ( Volume Variable ( Max Volume +10.
APPENDIX > Default settings Trigger Output ( Trigger Mode ( Target Zone Power All User Interface ( Display Settings ( Dimmer -2 ( Volume dB ( Short Message ( Position ( Touch Sound ( Remote Color Key ( Memory Guard On Bottom On Default Off ECO ( Auto Power Standby ( ECO Mode 20 minutes Off Tuner FM50/AM9 (Asia, Taiwan, Brazil, General, and Central and South America models only) Initialization - Backup/Restore - Firmware Update - Network Information - Network Connection
APPENDIX > Default settings Bluetooth Bluetooth On Audio Receive ( Disconnect ( Bluetooth Standby On Audio Send ( Transmitter ( Device Search Off - Language English 383
APPENDIX > Default settings Default settings of the Front Display menu The default settings of the “Front Display” menu are as follows.
Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.
