OWNER'S MANUAL
10 Ventilation - Slots and openings in the cabinet for ventilation and to ensure reliable operation product RISKOF ELECTRIC SHOCK DONOTOPEN CAUTION: ELECTRIC TO REDUCE THE RISK OF SHOCK, DO NOT REMOVE of Graphical 11 12 defeat WARNING Retain Instructions - The safety and operating instructions should be retained for future reference. 3 Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
___,T__'JIAVk'#lgtlle_'4i[elAvl¢ d) If the product the operating does not operate normally by following instructions.
1 To assure the finest performance, please read this 13 manual carefully. Keep it in a safe place for future reference. 2 3 4 5 Install this unit in a well ventilated, cool, dry, clean place with at least 30 cm on the top, 20 cm on the left and right, and 10 cm at the back of this unit -- away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
CONTENTS ............................................................ FEATURES ............................................................. GETTING STARTED ............................................ 1 2 3 Checking the package contents ................................. 3 Installing batteries in the remote control ................... 3 CONTROLS AND FUNCTIONS ......................... 4 Front panel ................................................................ Remote control ............................
Built-in 6-channel power amplifier • Minimum RMS output power (0.
Check your package to make sure it contains Remote control the following items. Batteries (4) (AAA, R03, ua-4) AM loop antenna 0000 0000 0000 [] Qr_ Front VIDEO Indoor FM antenna (U.S.A., Canada, China, Korea and General models) AUX jack cap 75-ohm/300-ohm antenna adapter (U.K. model) Fq r=n r=n r=n rqn rqn E23 EE3 (Europe, U.K.
o? ii I il i................... (U.K. and Europe models) _]! STANDBY/ON _) Turns this unit on, or set it to the standby INPUT MODE Sets the priority for the types you turn this unit on, you will hear a click and there will DTS, ANALOG) to receive be a 4 to 5-second sound. connected Standby delay before mode. When this unit can reproduce a small amount infrared-signals from the of Selects the input source is selected is Priority cannot as the input source.
,_m]Avlltr,{e]l_,"f_,yAVlll=71hV[Bjrl[e]Av_ O _ SILENT Allows headphones. are output _) (PHONES jack) you enjoy DSP effect When you connect to the speakers SPEAKERS listening headphones, or the OUTPUT with no signals jacks. connected to the A and/or between reproduction.
I[gI] AVl t : {I] Ik'f This section _"yAV l mi _] I] A*_ [I,J I [O] AV _ describes their functions. Make the remote control controls and sure that the AMP mode is selected before starting operation. See "REMOTE FEATURES" on pages 48 to 52. o CONTROL Infrared I_ Outputs component O control signals. at the indicator while the remote control is sending signals. STANDBY Sets this unit in the standby _) Aim this window you want to operate.
,gmIAVltt,{ellf,,"f_'yAVlDI,71hV[BJrI[e]AV_ O SELECT A/V Sets the remote to control a component other than the one selected using the input selector buttons. _) AMP Switches the function of the same controls between AMP and the component selected using the input selector buttons. I_) VOL +/Increasesor decreases the volume level. i i_) MUTE 6 m (20 feet) Mutes the sound. Press again to restore the audio output to the previous volume level. I_) SET MENU Selects the SET MENU mode.
I[gI] AVl t : {I] Ik'f : YAV l mi ;] Ih*_[I,J I [#] AV _ I vcRl ovD M0jc L I_ _T_,,r'_ Jfnn Dmir_.inm II-SILENTI ....... OTS DOLBY DIGITALPRO LOGIC "n"_ j_ _IrSTEREO AU' _ • MOVIE THTR 12ENTERTAINMENTJI_ _ITUNE0 MEM( II VOLUME '*ls' ,,_!!!!!!!! ..... !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I_44!! _B."B BBBBB BBBBB N_ _ N_ N_ N_ B."BBB BBBBB BBBBB ."_ !I ,;[][]®_[]_ (U.K.
This unit has been designed field quality fight speakers, speaker, brands to provide with a 6-speaker system, rear left and right speakers, and a rear center speaker. of speakers system, the following diagram when you place the speakers. a center Centerspeaker speaker(R) tonal qualities) Rearspeaker(R) in your human voice and other types may not shift smoothly.
Ek'!".t=r__YN:1:B.'!_lll]" Be sure to connect the left channel (L), fight channel faulty, no sound will be heard from the speakers, will be unnatural and lack bass. • Use speakers with the specified • Do not let the bare speaker and/or shown of the speaker properly. If the connections connections is incorrect, are the sound on the rear panel of this unit. wires touch each other or any metal part of this unit. This could damage this unit the speakers.
-/g=_flf_ifl=ill, f' Main B speaker Right Left Main A speaker Right Left Center speaker O ® ® O O ® ® D (9 O 0 ® Subwoofer system 0 Right Left Rear center Rear speaker speaker The diagram shows the speaker layout in the listening room.
Ek'!".t=rzlN:1:B.'!_lll]" • IMPEDANCE SELECTOR switch WARNING Do not change setting of the IMPEDANCE SELECTOR switch the unit. If this unit fails to turn on when STANDBY/ON SELECTOR switch may not be fully slid to either this unit is in the standby position. when the power (or SYSTEM POWER) If so, slide the switch of this unit is on, this may damage is pressed, the IMPEDANCE all the way to either position when mode.
• Connecting to digital jacks This unit has digital jacks digital signals through You can use the digital Do not connect mains this unit or other components power until all connections components Some methods ° When components digital require different jack names. other YAMAHA ° connect jacks to input PCM, Dolby Digital All digital sampling digital input jacks are acceptable signals.
IPi'li'ffl_li'li'l _ Refer • to the connection examples • If your video component has an S-video output or component video output, connect the S-video signal output jack on the component to the S VIDEO jack or connect the component video signal output jacks on the component to the COMPONENT VIDEO jacks. • The AUDIO jacks are available for a video component which does not have optical digital output jack. However, multichannel reproduction cannot be obtained with audio signals input from AUDIO jacks.
,_,h'll'l=(_il, il'F OPTICA-_ VCR TV/digital TV/ 1 OUTPUT I I cable TV I VIDEO OUTPUTr • INPUTt • _INPUT OUTPUT _OUTPUT AUD,OV,DEO y OUTPUT OUTPUT DVD VIDEO INPUT OUTPUT player i i Video monitor VIDEO OUTPUT Game console camcorder indicates signal direction --8 indicates left analog --_= indicates right analog --_ indicates optical '__ indicates video cables cables I I OUTPuTOPTICAL cables or _ cables 15
IPi'li'li'l_lNi'F • Connecting a CD player Connect the coaxial to the DIGITAL digital INPUT output jack on your CD player CD jack. • The AUDIO jacks are available for a CD player which does not have coaxial digital output jack. • Connecting a CD recorder or MD CD-R jack for digital recording.
_ioli'ffl_iNi'F Both AM and FM indoor unit. In general, antennas these antennas are included should provide with this sufficient signal strength. Connect each antenna terminals. correctly (included) AM loop antenna _ • Connecting [] Set up the AM loop antenna, then connect it. to the designated Indoor FM antenna (included) i [] Ground (GND terminal) For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground.
I[_i'li'li'l_li'li'l_ If you want to increase the power output to the speakers, or want to use another amplifier, connect an external amplifier to the OUTPUT jacks as follows. This unit is equipped • When RCA pin plugs are connected to the OUTPUT jacks for output to an external amplifier, signals are output from the SPEAKERS terminals as well. Connect the output jacks on your external decoder to the 6CH INPUT jacks.
_ioli'ffl_iNi'F When all connections this unit. VOLTAGE SELECTOR • Connecting the AC power cord AC OUTLETS U.S.A., General [] U.K. and Australia Use these outlets components the power by this unit's and STANDBY). to any source component whenever connected consumption of components) to the AC OUTLETS to this unit varies • models Remote control DSP program name appear and then the current on the front panel display.
You can video display operational monitor. program settings on a monitor, and information source on is playing, signal the OSD unit and on a DSP it is much parameters the front is not output not be recorded than panel easier it is by display. is superimposed is no video SET MENU can to the OUT (REC) with any video • You can set the OSD the this over the image.
This unit has 6 SPEAKER configuration SET items on the SET MENU and their size. The following as well as other possible that you must set according table summarizes these SPEAKER to the number SET items, of speakers in your and shows the initial settings settings. If the initial settings shown in the following table are not appropriate for your speaker configuration, see "1 SPEAKER SET" on pages 42-44 to change the settings.
This section explains how to adjust using the test tone generator. complete, the output speaker When output this adjustment level heard at the listening should be the same from each speaker. levels is position Use the test tone to balance This is important speakers. for best performance of the digital sound field processor, and the various decoders (Dolby Digital, Dolby Pro Logic, Dolby The adjustment the output of each should be made at your listening remote control.
:yl) l l[.',*l l h_[t.]k'! ".t._r_f[f .,_,:El] ll r.,l ll lll/ =l vi:i _. LEFT LEFT SURROUND RIGHT RIGHT SURROUND [] * Subwoofer speaker ;ENTER test tone is output (LEFT ^ v • To adjust the level of the main speakers, use VOLUME knob (or VOL +/- on the remote control). _1 REAR Adjust the level of the effect speakers using < / > so that it matches the level of the main speakers. While adjusting, the test tone is heard from the selected speaker.
4 6 4 [] Press INPUT <_ / _> repeatedly (one of the input selector buttons on the remote control) to select the input source. The selected input source name and input mode appear on the front panel display for a few seconds. ............. 81 or _>W/CBk VC__ VCR_/OVR QQQ ©00_[ 3 7 Front panel 7;R_/_,_ VCI:_I Remote V.AUX &W/CBL D_D _/C&R TUNER control CO pI-tONO VOLt_E =I!!!plI!.... ......r'..= "r'.. ""=i i"=" i_ _ r"l ,...i I i.
Start playback on the source or select a broadcast station component. Refer to the operation BGV (background The BGV instructions source. the volume The volume level is displayed Example: Control to the desired digitally. VOLUME MUTE (minimum) to 0 dB (maximum) level indicator also shows the current volume level as a bar graph. If desired, use BASS and TREBLE.
I :Y_,g:'][e,l ".lW,_t "d:P_T_ [ • This unit comes with a variety the type of input signals input jacks. You can select you desire. Each time you turn on the power mode is set according the SET MENU • of this unit, the input to "9 INPUT MODE" setting on Notes on 96-kHz sampling signals The digital input jacks of this unit can handle sampling digital signals. sampling digital signal is input to this unit: - DSP programs - Sound (see page 46 for details).
You can enhance DSP program. 30 to 34. your listening For details experience by selecting about each program, a see pages After selecting the desired program, press the same button repeatedly to select the desired sub-program if available. Example: Pressing MOVIE THEATER 1 repeatedly switches the sub-program between "Sci-Fi" and "Spectacle". H_L J_Z CLUe C_RV _A,_MENT r--;q r--;q r--;q r--z-q S_RTS _1_ T_ _ TH_TER 2 %gT°_ .....
I:Y_.V,."][e_'.,If,_|'d:P_T_; • Selecting PRO LOGIC ]1 You can enjoy the 2-channel six discrete channels sources by selecting [] decoded into five or PRO LOGIC Press SELECT repeatedly to select the decoder; PRO LOGIC or PRO LOGIC 1]. II in _ _ ENTER_ CONCE_TT_NMENT a_CL_ [-_ I-_ I-_ r_-] program No. 9. _ORTS _1 PROGRAM <:1/ _> M_E THEATER _ _T_R_ After selecting on the decoder (PRO LOGIC ll), select the mode appropriate for the source by pressing DN/DTS SUR.
• Playing Dolby Digital Surround EX or DTS ES software Press EX/ES to turn on the Dolby compatible Digital • SILENT You can enjoy EX or DTS-ES by connecting indicator lights up. while !F EX/ES MArx W_CVR VCRI V-AUX _W/C_ OVO M0/C_ TUNER MOVIETHTRI changes AUTO _ time the EX/ES button AUTO: Matrix6.1: .,"1 Matrix6.1 _ program using lights up effects stereo reproduction.
A sound field is defined particular space." early reflections produced as the "characteristic In concert and reverberations by the artist(s). other reverberations each venue as well as the direct The variations among its special sound reflections halls and other music venues, of a we hear sound in the early reflections the different music and recognizable venues and is what gives sound quality.
Filmmakers intend for the dialog even farther back, and the surround the images is an upgraded integrates the DTS, programs to provide CINEMA-DSP Dolby a surround so the listener sound In addition Surround the listener.
The 6-channel using matrix localization soundtracks processing. that 6-channel sound designed Digital • found on 70-mm This unit's MOVIE soundtracks for movie or DTS technology theaters THEATER precise sound field localization programs do. The built-in Dolby provide Digital into your home. With this unit's to recreate Dolby Digital/DTS film produce a dynamic or DTS decoder MOVIE and sound the professional-quality programs, you can use Dolby of being in a public theater.
• For movie programs: This unit automatically chooses No. 7 to 9 the appropriate decoder and DSP sound field pattern according to the input signal format. Table of Program Names for Each Input Format put No. 7 Program _ MOVIE THEATER 1 2 channel Stereo 70 mm Spectacle MOVIE DGTL DOLBY DIGITAL DTS 6.
The following list gives you a brief description mind that most of these are precise feel sounds best regardless No. 7 digital of the sound fields recreations produced of actual acoustic of the name and description Keep in Select the DSP program that you given for it below. Features Program MOVIE THEATER by each of the DSP programs. environments. Spectacle 1 This program precisely creates field incredibly Surround, Sci-Fi This the extremely reproduces real.
[] There are 2 ways to tune; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. • Automatic Press PRESET/TUNING <_ / [> once to begin automatic tuning. Press I::>to tune in to a higher frequency, or press <:1 to tune in to a lower frequency.
• Automatically presetting stations (for FM stations) You can use the automatic FM stations. This function automatically preset tuning feature enables this unit to tune in to FM stations to store with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order. This feature enables you to easily tune in to any preset number station by selecting the preset station (see page 38). Press FM/AM to select the FM band. _M/AM I." :.
iqi'lli'l • • Manually presetting stations You can also store up to 40 stations groups) (8 stations [] Press PRESET/TUNING <3 / D to select a preset station number (1 to 8) while the "MEMORY" indicator is flashing. Press I::>to select a higher preset station number. Press <3 to select a lower preset station number. x 5 manually. PRESEV_UN,N_ _" ! VG_2/OVR VCRI V-AUX &TV/CSL OVD MD/CC-R TUNER CO PHONO ,_ _ _ 4 3 [] I-: i"_;,I _"i['t 2,5 [] Tune in to a station.
You can tune any desired preset station number station under simply by selecting the which it was stored. You can exchange The example exchanging the assignment below describes preset station 21 of two preset the procedure "El" with "A5". 1,31,3 1 2 [] stations. for 2,4 Tune in to preset station "El" by using the A/B/C/DIE and PRESET/TUNING <_ / _>. See "Tuning in to a preset station" at left.
Use this feature standby mode to automatically after the amount sleep timer is useful this unit is playing set this unit in the of time you have set. The when you are going or recording to sleep while a source. The sleep timer also automatically turns off the external connected to AC OUTLET(S). • Press SLEEP appears component(s) repeatedly on the front After a few seconds, "SLEEP" The sleep timer can only be set with the remote control.
Recording adjustments performed from the recording operation instructions and other operations are components. Refer to the for these components. • Do a test recording • When 1 2 before you start an actual this unit is set in the standby between the components • The setting of BASS, connected TREBLE, • A given input channel.
The SET MENU consists of 11 items including the speaker mode setting. Choose the appropriate item and adjust or select the values as necessary. _%• You can adjust the items on the SET MENU while playing a Adjustment should be made with the remote control. source. • We recommend that you adjust the items on the SET MENU while using a video monitor. ,2 • The indication the OSD.
I-'1-'illt_1,ti'I _ Depending item. on the item, press A/v to select a sub 2 LFE'L,U,,'_L _''_ SPEAKER ...... HE ¢ff:,F'HONE .... ÷ OdE: OdB Use this feature to select suitable output modes for your speaker configuration. • When 96-kHz sampling digital signals are input to this unit, some items are not affected. [] Press < / > repeatedly to change the setting of the item. A 2 LFELEUEL ÷ SF'EAEER ...... HErB, PHONE..
• 1B MAIN (main speaker Choices: LARGE, mode) • 1D REAR CT (rear center speaker mode) SMALL LARGE By adding Select this if you have large main speakers. configuration, this unit can provide to-back and transitions. range of the main left and right channel The entire signal is directed to the main left and right speakers. frequency signals are directed speakers.
|'l-'illt_l_i*l _ • 1F MAIN Lv (main level mode) Change this setting of the center, main if you cannot speakers performance because of unusually from the main Nrm (Normal), Choices: match the output rear (L/R), and rear center speakers level with the high-efficiency Use this feature to adjust the delay of the center and the rear center channel sounds. This feature works when there speakers.
Use this feature is effective to adjust the dynamic range. only when this unit is decoding This setting Dolby Digital signals. Choices: Use this feature to change the name of the input which appears on the OSD or the front panel display. [] MAX, STD (standard), MIN (minimum) Press an input selector button to select the input you want to change the name of. MAX Select the "MAX" for feature films. [;,_._ [;, ÷ DHC, STD Select the "STD" for general < .._> A.._v use.
I"l'illt)l_i'l' It is possible to assign jacks according to be used if this unit's COMPONENT or DIGITAL names it possible connect INPUT/OUTPUT for jacks) jack to the component VIDEO input jack settings differ from that component. to change the jack assignment (component on this unit (see page 26 for details • and effectively Choices: more components.
Use this feature on this unit. Choices: to prevent accidental to settings ON, OFF Select ON to protect the following ° ° The on-screen display (OSD) All SET MENU items ° Center, levels ° DSP program • When changes rear speakers, features: mode rear center, and subwoofer parameters this item is set to ON, you cannot • When this item is set to ON, you cannot MENU items. use the test tone.
In addition to controlling manufacturers. this unit, the remote To control • Controlling The shaded areas when the AMP AMP mode. other components, control can operate this unit below mode can be used is selected. Press other A/V components you must set up the remote to control this unit AMP to select the Controlling The shaded areas components. component button button on the selected can be used has A/V.
_t.,_l_[ej l.'lr_re] AV lll,7{el I.,_ _f ,_W ll ll r,i _ Press A / v You can control other components by setting a manufacturer code. Codes can be set for each of the 12 component controls. video manufacturers display Component control (buttons) LD YAMAHA B CD-R YAMAHA C TV - PHONO VCR - V-AUX VCR - TUNER TUNER CD D-TV/CBL VCR1 VCR2/DVR A I I L If you want to change a library category), press < / ).
I,:t:lArl[l]l.,IGJ[l]A*qlt_,{l]ll.7._r:|ll];t_ You can change the name that appears in the display window on the remote control if you want to use a different name than the original. have set the input selector This is useful when you buttons to control different components. mum Press an input select selector the source button component or _ to you want to rename. The selected window. component name appears in the display =Ypg'_,_A=_ n=_ I]_`_ _E_.
[] Press and hold CLEAR again for about 3 seconds. "C:OK" [] appears in the display window. i'_!_!i;i!ii_i!! i_ffi!!i_')!!i!!!i_!!i! Press an input selector button or _ to select the component control for which you want to clear the name, function or manufacturer code. i!ii ]i!i!ii]iii Dm[] r_ [] OO© OO© OOO v-Aux [] . • "C:NG" TUNrR aO/CO_ C_W/CBL VCR1 appears unsuccessful. VC_2/OVR [] Press CLEAR by using a ballpoint pen or similar object.
I,:t:FArl[l]l.,IG*[l]A*qlt_,{l]ll.7._r:|ll];t_ You can operate other components when you have set the manufacturer code for your component. Note, however, that some buttons may not operate your component. Once you select an input source, the remote control switches to the mode for operating the component. You can also select a component to operate other than the one selected as the input source by pressing SELECT A/V. The display window shows the currently selected component that you can operate.
You can adjust (center, while the output level of each effect speaker [] rear left and right, rear center and subwoofer) listening Adjustment Press < / ) to adjust • The control to a source. should right speakers be made with the remote • The control to -20 dB. control. the speaker output level. range for the center or rear left and is from +10 dB to -10 dB.
What really creates are the multiple addition to making enable the rich, full tones of a live instrument reflections the sound us to tell where Elements straight these reflections is situated, and the size to the direct sounds reach our ears extremely sound), a wall. These fall into specific environment, and provide our ears. Early reflections sound.
__ellAVlBi=71_BBI'.Jr.{eIef:V=,YI_I'.I=,f:V=,YI_I_t_:i_B]IIIAV[Z [] You can enjoy high quality parameters. Although sound with the factory-set you do not have to change < be made with the remote control. _%• It is recommended settings. > to [] should A the initial settings, you can change some of the parameters better suit the input source or your listening room. Adjustments Press A / v to select the parameter. Press < / > to change the parameter value.
You can adjust the values listening Not all of the following • room. of certain digital sound INIT. DLY (Initial delay) [P. INT. DLY for the presence Function: This parameter direct Description: Control Range: field parameters parameters changes accurately in your sound field] the apparent sound and the first reflection the closer distance from the source sound by adjusting the delay between the heard by the listener.
.] [€'l l [_ Y_'To] l]A_l ml,,_l :ll/ ml ",_*_ Y,T V:T__l :l l _,7| m]:[..'f_,711",gl [e]A__ LIVENESS Function: This parameter adjusts early reflections Description: The early reflections surfaces Control range: the reflectivity of the virtual of a sound source than in one which has highly is referred to as "dead", while a room LIVENESS room. parameter lets you adjust 0to surfaces.
• REV.TIME Function: (Reverberation This parameter adjusts time) the amount of time it takes for the dense, decay by 60 dB (at 1 kHz). This changes extremely Description: Control range: subsequent size of the acoustic reverberation environment sound to over an wide range. Set a longer for "live" the apparent reverberation sources time for "dead" and listening sources and listening room environments, and a shorter time room environments. 1.0 to 5.
.] [€'l l [_ Y_'To] l]A_l ml,,_l :ll/ ml ",_*_ Y,T V:T__l :l l _,7| m]:[..'f_,711",gl [e]A__ For 6ch Stereo Function: Control These range: parameters adjust the volume level for each channel in 6-channel stereo mode.
Refer to the chart below when this unit does not function properly. If the problem below or if the instruction below does not help, set this unit to the standby contact the nearest authorized YAMAHA dealer or service center.
iiPlq:l_-Wlqqili'l _ Problem Cause Remedy Refer to page The sound suddenly goes off. The protection circuit has been activated because of a short circuit, etc. Check the IMPEDANCE to the appropriate back on. SELECTOR position switch Check the speaker wires are not touching and then turn this unit back on. Only the speaker on one side can be heard. No sound effect from the The sleep timer has functioned. Turn on the power, The sound is muted.
Problem Cause Refer Remedy to page No sound center from the rear speaker. A "humming" can be heard. sound Select LRG or SML. The Dolby Digital EX decoder or the DTS-ES compatible decoder is not on. Press the EX/ES button turn it on. Incorrect Firmly connect the audio plugs. If the problem persists, the cables may be defective. cable connections. No connection GND terminal. The volume level is low while playing The volume a record. level cannot be increased, or the sound is distorted.
iil'lq:l_-Wl'l'tili'l • _ Tuner Problem Cause Remedy Refer to page FM stereo reception is noisy. The characteristics of FM stereo Check the antenna broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. Use the manual There FM is distortion, and good interference. FM 35 tuning method. Adjust the antenna position multipath interference. The station is too weak.
• • Dolby Surround Dolby Surround to reproduce uses a 4 channel realistic analog and dynamic left and right channels (stereo), sound 2 main (monaural), and a rear channel effects (monaural). The rear channel within Dolby a narrow Surround for special reproduces range.
_r=pJ-l-'Mil' • Virtual CINEMA YAMAHA has developed algorithm • CINEMA DSP effects even without any rear speakers transmitted by using rear speakers. It is even possible minimal to enjoy virtual 2-speaker system CINEMA DSP using a that does not include a center speaker. • PCM (Linear PCM) PCM is a signal format audio signal is digitized, using any compression.
AUDIO SECTION FM SECTION • Minimum RMS Output Power for Main, Center, Rear, Rear Center 20 Hz to 20 kHz, 0.06% THD, 8 _ ....................................... 75 W 1 kHz, 0.06% THD, 8 _ ........................................................ 80 W • Tuning Range [U.S.A. mad Canada models] ............................ 87.5 to 107.9 MHz [Other models] .............................................. 87.50 to 108.00 MHz • DIN Standard Output Power [Europe model] 1 kHz, 0.7% THD, 4 g2 .......................
OYAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIE 90620, U,S,A, CANADA MUSIC LTD. 135 MILNER AVE,, SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELUNGEN BE1 HAMBURG, F.R, OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B.
