English for Asia*, Africa, Oceania and Latin America Quick Reference Guide ■ *Except for China and Korea Accessories The following accessories are supplied with this product. PUSH Batteries (2) (AAA, R03, UM-4) Remote control AM loop antenna Indoor FM antenna VIDEO AUX input cover YPAO microphone Preparing the remote control 1 3 Take off the battery compartment cover. 2 Insert the two supplied AAA batteries into the battery case, following the polarity markings.
Connect and install as follows the first time you use this unit. See the following explanations for the connections for each number. TV 3 2 BD/DVD player (recorder) 4 This unit Front speaker R Front speaker L Subwoofer Surround speaker R 1 Center speaker 6.1 Surround back speaker 1 Surround speaker L 7.1 7.1 Surround back speaker L Surround back speaker R 7.1 Connect when using with 7.1-channel speaker layout. Place the surround back speakers (L/R) 30 cm or more away from each other.
1 Connect the speakers Front speaker R L Surround speaker R L 7.1 HDMI 2 HDMI 3 HDMI 4 7.1 Connect when using with 7.1-channel speaker layout. 6.1 Connect when using with 6.1-channel speaker layout. Surround back speaker R L 7.1 6.1 Caution: • Remove the AC power cable of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables.
2 Connect a TV If your TV has multiple inputs, connect with the following priority (A to C). DOCK HDMI 1 HDMI OUT 1 ARC SELECTABLE PHONO H (BD/DVD) HDMI 2 HDMI ARC ANTENNA FM REMOTE GND AM PR PR COMPONENT VIDEO IN GND PR OUT 75 PB compatible TV. COMPONENT VIDEO COMPONENT VIDEO PR PB PB Y Y B When using a component PB VIDEO VIDEO Y A When using an HDMI HDMI Y V video input-compatible TV. +12V 0.
3 Connect playback device such as BD/DVD players and recorders If your playback device has multiple audio/video outputs, connect with the following priority (A to D) to enjoy a higher quality sounds and images.
5 Set up the speaker parameters automatically (YPAO) When all connections are complete, adjust the configuration, sizes, and volume balance of the speakers to provide an optimal sound field. This unit is equipped with a Yamaha Parametric Room Acoustic Optimizer (YPAO) function that adjusts the speaker balance automatically with a simple procedure. When using YPAO, a test tone will be output from the speakers for approximately 3 minutes to measure acoustics. Be aware of the following when using YPAO.
5 Use the cursor B/C to select the “Measure” and press ENTER to start measurement. MAIN When “Multi Position” is set to “Yes” (default), the measurement of multiple positions will follow. Refer to “Setting up the speaker parameters automatically (YPAO)” for details on “Multi Position” in the Owner’s Manual. ZONE 2 CODE SET SOURCE RECEIVER RECEIVER A HDMI 1 2 5 V-AUX V VAUX 3 4 AUDIO The following display appears if measurement finishes without any problems.
Operation guide A B C D MAIN ZONE PURE DIRECT ZONE2 ZONE CONTROL INFO MEMORY FM PRESET AM TUNING VOLUME INPUT SCENE BD DVD TV CD RADIO PROGRAM PHONES YPAO MIC TONE CONTROL VIDEO AUX STRAIGHT SILENT CINEMA HDMI IN G VIDEO L AUDIO R F A Switches this unit between on and standby mode A This unit switches between on and standby mode every time you press this key.
Owner’s Manual AV Receiver English for Asia*, Africa, Oceania and Latin America *Except for China and Korea
CONTENTS INTRODUCTION Connecting the FM/AM antennas .................................. 31 Features and capabilities ................................................... 4 Setting up the speaker parameters automatically (YPAO).............................................................................. 32 Using the TV OSD to operate the unit ............................. 5 View or modify content for the current input source ...........................................................
SETUP Configuring input sources (Input menu) ....................... 66 Configuring input sources .............................................. 66 Input menu...................................................................... 67 Editing the SCENE function (SCENE menu) ............... 70 Editing a scene................................................................ 70 SCENE menu.................................................................. 71 Setting sound program parameters (Sound Program menu) ....
INTRODUCTION Features and capabilities ■ Built-in high-quality, high-power 7-channel amplifier ■ 6 HDMI input jacks (5 + 1 VIDEO AUX) supporting Audio Return Channel and 3D video signal ■ 2 HDMI output jacks – Selecting the HDMI OUT jack ................................................................................................................40 ■ 1-button input/sound program switching (SCENE function)................................42 ■ Speaker connections for 2- to 7.
INTRODUCTION Using the TV OSD to operate the unit This unit features a sophisticated on-screen display (OSD) for the TV screen. The OSD is designed to enable visual guidance that simplifies operations. The OSD mainly displays the ON SCREEN and OPTION menus, as well as the Content window that displays the content of current input sources. ■ Select an input source, SCENE and sound program – Select an input source .................................................................................................
INTRODUCTION Using the TV OSD to operate the unit ■ Adjust video signals output from this unit – Convert analog video signal to another type of signal .......................84 – Specify the resolution and aspect ratio of analog video signal converted to HDMI or specify upscaling resolution for 480i/576i- or 480p/576p-HDMI output signal ...........................................
INTRODUCTION Using the TV OSD to operate the unit About this manual • Some features are not available in certain regions. • This manual is created prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority. • “dHDMI1” (example) indicates the name of the parts on the remote control. Refer to the “Remote control” (☞p. 11) for the information about each position of the parts.
INTRODUCTION Part names and functions Front panel e INFO a MAIN ZONE A (Power) f b c d Switches this unit between on and standby mode. HDMI Through/iPod Charge indicator Lights up in any of the following cases while the unit is in standby mode. • When the Standby Through function is enabled and audio/video from an external component connected with HDMI is output to a TV during standby mode (☞p. 87).
INTRODUCTION Part names and functions Rear panel f REMOTE IN/OUT jacks a DOCK jack g b c d e For connecting an optional Universal Dock for iPod/iPhone (such as YDS-12), iPod wireless receiver (YID-W10), or Bluetooth wireless audio receiver (YBA-10) (☞p. 59, p. 62, p. 64). PHONO jacks For connecting a turntable (☞p. 27). HDMI OUT 1-2 jacks For connecting an HDMI - compatible TV to output audio/video signals (☞p. 22). ANTENNA jacks For connecting AM and FM antennas (☞p. 31).
INTRODUCTION Part names and functions h MUTE indicator Front panel display a HDMI indicator b c d e f g ■ Switching information on the front panel display Flashes when audio is muted. i VOLUME indicator Lights up during normal HDMI communication when any of the HDMI1-5 inputs are selected. OUT 1/OUT 2 indicators Lights up which outputs audio/video signals from the HDMI OUT jack (☞p. 22). CINEMA DSP indicator Lights up when a sound field effect that uses CINEMA DSP technology is selected.
INTRODUCTION Part names and functions a Remote control signal transmitter Remote control h PARTY Switches the party mode on and off (☞p. 104). Transmits infrared signals. b MAIN/ZONE2 Switches the zone to be operated by the remote control between the Main zone and Zone2 (☞p. 104).
INTRODUCTION Part names and functions ■ Displaying the following menus or viewing the current status of this unit on the TV screen On-screen display When a TV is connected to this unit, the supplied remote control can be used to specify and verify this unit’s settings via menus and options displayed on the TV screen. • ON SCREEN menu Press ON SCREEN to display the ON SCREEN menu. • OPTION menu Press OPTION to display the OPTION menu. • Content window Press Input selector to display the Content window.
CONNECTIONS Connecting speakers This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and connections in your listening environment. Speaker channels and functions ■ Surround left and right speakers ■ Surround back left and right speakers ■ Front left and right speakers The surround speakers are for effect and vocal sounds with the 5.
CONNECTIONS Connecting speakers Speaker layout ■ Enjoying the 7.1 channel audio source ■ 7.1-channel speaker layout (7 speakers + subwoofer) Front speaker R Subwoofer Front speaker L Surround speaker R ■ Assigning a speaker configuration ■ Connections of speakers A speaker configuration must be assigned to this unit to activate the speakers. Use the “Power Amp Assign” function to easily apply the appropriate speaker settings to this unit according to the speaker configuration.
CONNECTIONS Connecting speakers ■ Enjoying the 7.1 channel audio source without surround back speakers ■ 5.1-channel speaker layout (5 speakers + subwoofer) Front speaker R ■ Assigning a speaker configuration ■ Connections of speakers A speaker configuration must be assigned to this unit to activate the speakers. Use the “Power Amp Assign” function to easily apply the appropriate speaker settings to this unit according to the speaker configuration.
CONNECTIONS Connecting speakers ■ Using speakers in two rooms (Zone2 function) ■ 7.1-channel speaker layout + Zone2 (7 speakers (in main zone) + subwoofer (in main zone) + front speakers (in secondary zone)) In addition to the main room, speakers in another room can also be controlled. When the built-in amplifier for the speakers in another room is turned on, the speakers that output the sound are switched from the surround back speakers to the speakers in another room automatically.
CONNECTIONS Connecting speakers Connecting speakers and subwoofer Connect your speakers to their respective terminals on the rear panel. CAUTION • Remove the AC power cable of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity.
CONNECTIONS Connecting speakers ■ Bi-amp connection This unit can be connected to speakers that support bi-amp connections. When connecting speakers, connect the FRONT jacks and the SURROUND BACK/BI-AMP jacks as in the diagram below. Configure the bi-amp settings to activate connections. ■ Changing speaker impedance ■ Multi-zone audio system using the internal amplifier of this unit Connect the speakers in the second zone to the EXTRA SP jacks as in the diagram below.
CONNECTIONS Connecting speakers 3 Check that “SP IMP.” is displayed on the front panel. SP IMP. -8 MIN 4 5 Press STRAIGHT repeatedly to select a “6ΩMIN.” ■ Connecting speakers ■ Connecting the subwoofer This type of jack can connect to the following speakers or connection. • • • • • Front L/R speakers Center speaker Surround L/R speakers Surround back L/R speakers Bi-amp connection (Front speaker L/R speakers) Switch this unit to the standby mode, and then switch it on again.
CONNECTIONS Connecting external components Cable plugs and jacks VIDEO jacks This unit is equipped with the following input/output jacks. Use jacks and cables appropriate for components that you are going to connect. These jacks transmit conventional analog video signals. Use video pin cables. ■ Audio/Video jacks Video pin cable HDMI jacks Digital video and digital sound are transmitted through a single jack. Only use an HDMI cable.
CONNECTIONS Connecting external components Connecting a TV monitor When connecting to a non-HDMI compatible TV This unit is equipped with the following three types of output jack for connection to a TV. HDMI OUT 1-2, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input signal format supported by your TV.
CONNECTIONS Connecting external components ■ Connecting an HDMI video monitor ■ Connecting a component video monitor J1 Connect the HDMI cable to one of the HDMI OUT 1-2 jacks. Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks.
CONNECTIONS Connecting external components ■ Listening to TV audio To transmit sound from the TV to this unit, connect as followings according to the TV: When using a TV that supports the Audio Return Channel function and HDMI Control function When your TV supports both HDMI Control (e.g., Panasonic VIERA Link) and Audio Return Channel functions, audio/video output from the unit to the TV and audio output from the TV to the unit are possible using a single HDMI cable.
CONNECTIONS MAIN Connecting external components ZONE 2 CODE SET Connecting BD/DVD players and other devices SOURCE RECEIVER HDMI 1 2 3 5 V-AUX 1 4 This unit has the following input jacks. Connect them to the appropriate output jacks on the playback devices such as BD/DVD players.
CONNECTIONS Connecting external components ■ Connecting BD/DVD players and other devices with component video cables Connect the device with a component video cable to one of the AV1-2 input jacks. ■ Component connections to analog audio output devices Component video / Audio output Using optical digital audio output sources Select the AV1 input to which the playback device is connected for playback.
CONNECTIONS Connecting external components ■ Connecting BD/DVD players and other devices with video cables Connect the playback device with a video pin cable to one of the AV3-6 input jacks. Using analog stereo audio output sources Select the AV5 or AV6 input to which the playback device is connected for playback. Using optical digital audio output sources Select the AV4 input to which the playback device is connected for playback.
CONNECTIONS Connecting external components ■ Connecting CD players and other audio devices Using coaxial digital output sources Select the AV input (AV2 or AV3) to which the playback device is connected for playback. Using analog stereo output sources Select the audio input (AUDIO1-2) to which the playback device is connected for playback.
CONNECTIONS Connecting external components Connecting game consoles Connecting a multi-format player or an external decoder Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as a game console to the receiver. Select the V-AUX input to use these connected devices. This unit has 8 sets of input jacks (FRONT L/R, CENTER, SURROUND L/R, SUR. BACK and SUBWOOFER) to input multi-channel analog sound signals.
CONNECTIONS Connecting external components Connecting an external amplifier Connecting a SCENE link playback-compatible device The same channel signals are output from the jacks of the PRE OUT terminals as from their corresponding SPEAKERS terminals. When connecting an external power amplifier (pre-main amplifier) to enhance speaker output, connect the input terminals of the power amplifier to the PRE OUT terminals of this unit.
CONNECTIONS Connecting external components Using the Trigger function to link external component power Connecting audio/video recording devices When this unit is connected to a Yamaha subwoofer that supports the system connection or the component with TRIGGER IN jack, you can turn on and off the component by using this unit. This receiver can transmit selected incoming analog audio/video signals to external components through the AV OUT and AUDIO OUT jacks.
CONNECTIONS Connecting the FM/AM antennas An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas properly to their respective jacks. AM loop antenna Position the AM antenna away from the receiver. The wires of the AM antenna have no polarity. You can connect either wire to the AM jack or the GND jack. Indoor FM antenna DOCK HDMI 1 HDMI OUT 1 We recommend using an outdoor antenna. For more information, consult the nearest authorized dealer.
CONNECTIONS Setting up the speaker parameters automatically (YPAO) This unit is equipped with a Yamaha Parametric Room Acoustic Optimizer (YPAO) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using YPAO allows you to automatically configure settings, such as adjusting speaker output and acoustic parameters to suit your listening room (the room in which this unit is placed).
CONNECTIONS MAIN Setting up the speaker parameters automatically (YPAO) ZONE 2 CODE SET SOURCE RECEIVER 4 HDMI 1 2 3 4 5 V-AUX 1 2 4 AUDIO Connect the YPAO microphone to the YPAO MIC jack on the front panel. AV 2 3 5 6 MULTI BD DVD To measure at the multiple listening positions (up to 8), press kCursor B / C to select “Yes” and press kENTER.
CONNECTIONS MAIN Setting up the speaker parameters automatically (YPAO) ZONE 2 CODE SET SOURCE RECEIVER 1 2 3 5 V-AUX 1 2 Press kCursor B / C repeatedly to select the “Measure” and press kENTER to start measurement. Auto measurement starts in 10 seconds. 6 HDMI 4 AUDIO AV 1 2 3 4 5 6 MULTI DOCK HDMI OUT TUNER FM AM MEMORY MOVIE MUSIC SLEEP PARTY PRESET YPAO TUNING ENHANCER SUR.
CONNECTIONS MAIN Setting up the speaker parameters automatically (YPAO) ZONE 2 CODE SET The following display appears again when measurement at the last position finishes without any problems. SOURCE RECEIVER HDMI 1 2 3 4 5 V-AUX 1 2 1 2 3 4 5 6 MULTI DOCK AUDIO 8 YPAO AV YPAO PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET VOL. Save/Exit HDMI OUT TUNER Press kCursor B / C to select “Save/Exit” and press kENTER. L SL SW C Press kENTER.
CONNECTIONS MAIN Setting up the speaker parameters automatically (YPAO) ZONE 2 CODE SET ■ Reviewing and reloading automatic SOURCE RECEIVER setup parameters HDMI 1 2 3 5 V-AUX 1 4 The results of automatic acoustics measurement can be reviewed once measurement is complete. Automatic setup parameters can also be reloaded if you are not satisfied with manually configured speaker setup and sound adjustments.
CONNECTIONS MAIN Setting up the speaker parameters automatically (YPAO) ZONE 2 CODE SET ■ When an error message is SOURCE RECEIVER HDMI 1 2 3 4 AUDIO 5 V-AUX 1 2 4 AV 1 2 3 5 6 MULTI displayed during measurement See “Error messages” (☞p. 38) for instructions on resolving the problem and measure acoustics again. DOCK HDMI OUT TUNER FM AM MEMORY MOVIE MUSIC SLEEP PARTY BD DVD TV PRESET TUNING ENHANCER SUR.
CONNECTIONS Setting up the speaker parameters automatically (YPAO) ■ Message list ■ Error messages NOTE If the following messages appear, resolve the problems that have occurred and carry out the measurement process again. ■ When a warning message is displayed before measurement Connect MIC! The YPAO microphone is not connected. Connect the YPAO microphone to the YPAO MIC jack on the front panel. Unplug HP! The headphones are connected. Remove the headphones.
CONNECTIONS Setting up the speaker parameters automatically (YPAO) ■ Warning messages W-1: Out of Phase The speakers displayed are connected with the opposite polarity. Depending on the type of speakers you are using and the environment in which you have them installed, this message may occur even if the speakers are connected correctly. Depending on the type of speakers, “W-1” may display even if the speakers are connected correctly.
PLAYBACK MAIN ZONE 2 CODE SET Basic playback procedure SOURCE RECEIVER HDMI 1 2 3 4 AUDIO 5 V-AUX 1 2 1 2 3 4 5 6 MULTI AV DOCK HDMI OUT TUNER FM d PHONO r AM PRESET INFO MEMORY MOVIE MUSIC SLEEP PARTY 1 2 Turn on external components (TV, DVD player, etc.) connected to this unit. Use the dInput selector to select the input source. The name of the selected input source is displayed for a few seconds. J1 TUNING ENHANCER SUR.
PLAYBACK Basic playback procedure Adjusting high/low-frequency sound (Tone control) You can adjust the balance of the high-frequency range (Treble) and low-frequency range (Bass) of sounds output from the front left and right speakers to obtain desired tone. The tone control of the speakers or headphones can be set separately. Set the headphone tone control with the headphones connected. 1 Press TONE CONTROL on the front panel repeatedly to select “Treble” or “Bass.
PLAYBACK MAIN ZONE 2 Changing input settings with a single key (SCENE function) CODE SET SOURCE RECEIVER This unit has a SCENE function that allows you switch this unit on and change input sources, sound programs, and HDMI OUT with one key. HDMI 1 2 3 4 AUDIO 5 V-AUX 1 2 4 AV 1 2 3 5 6 MULTI DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET Four scenes are available for different uses, such as d playing movies or music.
PLAYBACK MAIN Enjoying the desired sound field effect ZONE 2 CODE SET HDMI 1 2 3 4 AUDIO 5 V-AUX 1 2 1 2 3 4 5 6 MULTI DOCK HDMI OUT FM ■ Enjoying stereo playback Press sMUSIC repeatedly Use straight decoding mode when you want to playback sound without sound field processing. You can playback as follows in straight decoding mode.
PLAYBACK Enjoying the desired sound field effect ■ Enjoying sound programs without ■ Enjoying more spatial sound fields ■ Enjoying sound programs without This unit allows you to use virtual surround speakers to enjoy sound field surround effects, even without any surround speakers (Virtual CINEMA DSP mode). You can even enjoy surround sound presence with just a minimal configuration of the front speakers only.
PLAYBACK MAIN Enjoying the desired sound field effect ZONE 2 CODE SET ■ Enjoying Hi-Fi Sound Quality SOURCE RECEIVER (Pure Direct mode) HDMI 1 2 3 4 Use Pure Direct mode to enjoy the pure high fidelity sound of the selected source. When Pure Direct mode is enabled, this unit plays back the selected source with the least circuitry. J1 AUDIO 5 1 V-AUX 2 AV 1 2 3 4 5 6 MULTI DOCK HDMI OUT TUNER FM PHONO Press sPURE DIRECT to turn Pure Direct mode on.
PLAYBACK Enjoying the desired sound field effect Sound programs Action Game This sound field is suitable for action games such as car racing, fighting games and FPS games. The reality of, and emphasis on, various effects makes the player feel like they are right in the middle of the action, allowing for greater concentration. Use this program in combination with Compressed Music Enhancer mode for a more dynamic sound field.
PLAYBACK Enjoying the desired sound field effect ■ Category: MUSIC ■ Category: SUR.DEC (Surround decode mode) This sound field is suitable when listening to music sources such as CDs. Select this program to playback sources with selected decoders. You can playback 2-channel audio sources in up to 7-channels using a surround decoder.
PLAYBACK MAIN ZONE 2 Using the TV display to control this unit CODE SET SOURCE RECEIVER This unit features a sophisticated on-screen display (OSD) that helps you to control the amplifier function of this unit. With the OSD, you can view information of the signals being input and the status of this unit. Visual guidance simplifies operations for menus.
PLAYBACK MAIN Using the TV display to control this unit ZONE 2 CODE SET ■ Selecting a scene SOURCE RECEIVER ■ Selecting a sound program HDMI 1 2 3 4 1 AUDIO 5 V-AUX 1 2 4 AV 1 2 3 5 6 MULTI Use kCursor B / C to select “Scene” and press kENTER. 1 Use kCursor B / C to select “Sound Program” and press kENTER. DOCK HDMI OUT TUNER Menus can be operated and the status of this unit confirmed from the following three main displays. • ON SCREEN menu (☞p. 66) • OPTION menu (☞p.
PLAYBACK MAIN ZONE 2 Configuring settings specific to an individual input source (OPTION menu) CODE SET SOURCE RECEIVER This unit has a unique OPTION menu for each input source. OPTION menus can be used to enable features such as volume trim for compatible input sources or to display audio/video data.
PLAYBACK Configuring settings specific to an individual input source (OPTION menu) OPTION menu DOCK (iPod) The following items are provided for each input source.
PLAYBACK Configuring settings specific to an individual input source (OPTION menu) ■ Auto-adjusting the sound level to make even low volumes more audible ■ Adjusts the vertical position of dialogues ■ Selecting the 5.1-channel signal playback method Dialogue Lift Adaptive DRC Input source: Input source: All input sources except MULTI CH Adjusts the dynamic range in conjunction with the volume level (from minimum to maximum).
PLAYBACK Configuring settings specific to an individual input source (OPTION menu) ■ Adjusting volume between input sources Volume Trim Input source: ■ Repeat playback with iPod/iPhone Repeat Input source: All Reduces any change in volume when switching between input sources by correcting volume differences in each input source. You can adjust this parameter for each input source. DOCK (iPod) J1 Plays songs or albums repeatedly.
PLAYBACK MAIN ZONE 2 Confirming and operating input sources from the Content window CODE SET SOURCE RECEIVER When DOCK or TUNER is selected, the Content window is displayed on the TV screen. Playback style for iPod and functions for FM/AM tuner can be set in the Content window. HDMI 1 2 3 4 AUDIO 5 V-AUX 1 2 AV 1 2 3 4 5 6 MULTI DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY BD DVD TV PRESET d A TV screen is required to display the Content window.
PLAYBACK MAIN ZONE 2 FM/AM tuning CODE SET SOURCE RECEIVER HDMI 1 2 3 When using the FM/AM tuner, adjust the direction of the FM/AM antenna connected to this unit to get the best reception. 4 AUDIO 5 1 V-AUX 2 AV 1 2 3 4 5 6 MULTI DOCK 3 Rotate PROGRAM selector to display “TU.” HDMI OUT TUNER d PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY e PRESET TUNING ENHANCER SUR.
PLAYBACK MAIN FM/AM tuning ZONE 2 CODE SET SOURCE RECEIVER 3 HDMI 1 2 3 5 V-AUX 1 4 AUDIO 2 eTUNING H Increases the frequency. Press and hold this key for longer than a second to search automatically for a station on a higher frequency than the current one. J1 AV 1 2 3 4 5 6 MULTI DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET TUNING ENHANCER SUR. DECODE MOVIE MUSIC SLEEP PARTY STRAIGHT PURE DIRECT Use eTUNING H / I to set a frequency to receive.
PLAYBACK MAIN FM/AM tuning ZONE 2 CODE SET Confirming and operating the FM/AM tuner from the Content window SOURCE RECEIVER HDMI 1 2 3 4 5 V-AUX 1 2 4 AUDIO Screen buttons on the Now playing view To use these buttons, first press kENTER. Then select the desired one with kCursor B / C and kENTER. FM Mode Manual Tuning AV 1 2 3 5 6 MULTI DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET TUNING ENHANCER SUR.
PLAYBACK MAIN FM/AM tuning ZONE 2 CODE SET ■ Operating from the Content browse SOURCE RECEIVER HDMI 1 2 3 5 V-AUX 1 4 view Now Playing Switches the display to the Now playing view. AUDIO 2 AV 1 2 3 4 5 6 MULTI DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET a b TUNING ENHANCER SUR. DECODE STRAIGHT PURE DIRECT SCENE BD DVD TV CD RADIO a Preset station list OPTION ON SCREEN The list of preset stations is displayed.
PLAYBACK MAIN ZONE 2 Playing back tunes from your iPod™/iPhone™ CODE SET SOURCE RECEIVER Once you have connected a Universal Dock for iPod/iPhone (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound programs to give compressed audio formats such as MP3 a sharper, more dynamic sound (☞p. 45).
PLAYBACK MAIN Playing back tunes from your iPod™/iPhone™ ZONE 2 CODE SET Playing iPod/iPhone from the menu screen (Menu browse control) SOURCE RECEIVER HDMI 1 2 3 4 10 Pages Up ■ Operating from the Now playing view AUDIO 5 V-AUX 1 2 4 AV 1 2 3 5 6 MULTI DOCK HDMI OUT TUNER FM PHONO AM PRESET INFO 10 Pages Down The iPod/iPhone can be operated from the menu displayed on the TV screen. d You can operate the iPod/iPhone from the Now playing view or the Content browse view.
PLAYBACK MAIN Playing back tunes from your iPod™/iPhone™ ZONE 2 CODE SET SOURCE RECEIVER Play Control HDMI 1 2 3 4 5 V-AUX 1 2 4 p (Play) Starts playback. DOCK s (Stop) Stops playback. e (Pause) Stops playback temporarily. b (Skip -) Skips to the beginning of the currently playing song. Press kENTER at the beginning of the song to skip to a previous song. a (Skip +) Skips to the beginning of the next song. w (Scan -) Searches backwards. f (Scan +) Searches forwards.
PLAYBACK MAIN Playing back tunes from your iPod™/iPhone™ ZONE 2 CODE SET Operating basic playback functions via the remote control (Simple remote control) SOURCE RECEIVER HDMI 1 2 3 4 AUDIO 5 1 V-AUX 2 AV 1 2 3 5 6 MULTI 4 DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET TUNING ENHANCER SUR. DECODE MOVIE MUSIC SLEEP PARTY d Use the following remote control keys to operate (playback, stop, skip, etc.) your iPod/iPhone. Press lREC to enable the Simple remote control.
PLAYBACK MAIN Playing back tunes from your iPod™/iPhone™ ZONE 2 CODE SET Use iPod/iPhone to start playback. SOURCE RECEIVER HDMI 1 2 3 4 When “iPod Interlock” → “Volume” in the Input menu is set to “Off,” the volume of this unit is not adjusted when iPod/iPhone volume controls are adjusted (☞p. 69). AUDIO 5 1 V-AUX 2 AV 1 2 3 4 5 6 MULTI DOCK d HDMI OUT TUNER • Adjusting volume control on the iPod/iPhone also adjusts the volume (max 0.0 dB) of this unit.
PLAYBACK MAIN ZONE 2 Playing back tunes from Bluetooth™ components CODE SET SOURCE RECEIVER You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible portable music players. J1 HDMI 1 2 3 4 AUDIO 5 1 V-AUX 2 AV 1 2 3 4 5 6 MULTI DOCK NOTE d HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET TUNING e ENHANCER SUR.
PLAYBACK MAIN Playing back tunes from Bluetooth™ components ZONE 2 CODE SET SOURCE RECEIVER 5 HDMI 1 2 3 4 5 V-AUX 1 2 4 AUDIO AV 1 2 3 5 6 MULTI DOCK When the device is recognized, it will appear in the Bluetooth component list, for example as “YBA-10 YAMAHA.” d HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET TUNING 6 ENHANCER SUR. DECODE MOVIE MUSIC SLEEP PARTY STRAIGHT PURE DIRECT Make sure the Bluetooth component recognizes the Bluetooth wireless audio receiver.
SETUP MAIN ZONE 2 CODE SET Configuring input sources (Input menu) SOURCE RECEIVER HDMI 1 2 3 Settings, such as the name of an input source or the icon displayed for an input source can be changed from the Input menu. 4 AUDIO 5 V-AUX 1 2 1 2 3 4 5 6 MULTI DOCK AV Configuring input sources HDMI OUT TUNER The name of an input source and its icon, as well as other input source settings, can be changed from the Input menu displayed on the TV screen.
SETUP MAIN Configuring input sources (Input menu) ZONE 2 CODE SET ■ Changing an input source name or Input menu SOURCE RECEIVER icon HDMI 1 2 3 4 5 V-AUX 1 2 4 AUDIO HDMI1-5 AV 1 2 3 5 6 MULTI DOCK Decoder Mode PHONO AV1-2 FM Audio In Enhancer HDMI OUT TUNER Rename/ Icon Select AM PRESET INFO MEMORY MOVIE MUSIC SLEEP PARTY TUNING Rename/ Icon Select Audio In Decoder Mode Enhancer Enhancer 3 Press kENTER, and then press kCursor B / C / D / E to edit the new i
SETUP Configuring input sources (Input menu) ■ Combining HDMI/AV1-2 input source video and audio ■ Setting the format of digital audio signals Decoder Mode Audio In Input source: Input source: HDMI1-5, AV1-2 Combines video from HDMI or AV input sources with analog/ digital audio inputs in situations such as: – an playback device is connected with an HDMI cable but cannot transmit audio through HDMI – an playback device with component video output and analog audio output (such as certain game consoles)
SETUP Configuring input sources (Input menu) ■ Setting the interlock functions with iPod/ iPhone (when a Yamaha iPod wireless receiver is connected) iPod Interlock Input source: ■ Outputting a video signal input from another input source while playing a multi-channel audio signal Video Out DOCK (iPod) This unit can be automatically operated in conjunction with operations on iPod when the iPod wireless receiver is connected to this unit.
SETUP MAIN ZONE 2 Editing the SCENE function (SCENE menu) CODE SET SOURCE RECEIVER The SCENE function (☞p. 42) can be edited from the SCENE menu displayed on the TV screen. HDMI 1 2 3 4 AUDIO 5 V-AUX 1 2 Editing a scene AV 1 2 3 4 5 6 MULTI DOCK Various settings, such as the name of a scene or the icon displayed for a scene, can be changed from the SCENE menu. HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY BD DVD TV PRESET TUNING ENHANCER SUR.
SETUP Editing the SCENE function (SCENE menu) SCENE menu ■ Registering SCENE function settings Save SCENE1 Save Load Rename/Icon Select Reset SCENE2 Save Load Rename/Icon Select Reset SCENE3 Save Load Rename/Icon Select Reset SCENE4 Save Load Rename/Icon Select Reset Registers the setting currently applied to this unit for each SCENE.
SETUP MAIN Editing the SCENE function (SCENE menu) ZONE 2 CODE SET ■ Changing a scene name and icon SOURCE RECEIVER ■ Resetting a scene HDMI 1 2 3 4 Rename/Icon Select AUDIO 5 V-AUX 1 2 1 2 3 4 5 6 MULTI Changes the scene name and icon displayed on the front panel display or TV screen. AV Reset Restores all settings to their default values.
SETUP MAIN ZONE 2 Setting sound program parameters (Sound Program menu) CODE SET SOURCE RECEIVER Sound effects can be adjusted from the Sound Program menu. HDMI 1 2 3 4 AUDIO 5 V-AUX 1 2 Editing sound programs AV 1 2 3 4 5 6 MULTI DOCK Adjust sound field elements (sound program parameters) to achieve sound effects suited to the acoustics of audio/ video sources or rooms if you are not satisfied with the results achieved with default sound program settings.
SETUP Setting sound program parameters (Sound Program menu) -6 dB to +3 dB Default setting 0 dB Adjust “DSP Level” as follows: Surround Room Size Surround Back Initial Delay Surround Back Room Size Initial delay. Presence, surround, and surround back sound field initial delay. Changes the apparent size of the sound field by adjusting the delay between the direct sound and the first reflection heard by the listener. The smaller the value, the smaller the sound field seems to the listener.
SETUP Setting sound program parameters (Sound Program menu) Reverb Time Surround Liveness Surround Back Liveness Liveness. Surround and surround back liveness. Adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections decay. The early reflections of an audio source decay much faster in a room with acoustically absorbent wall surfaces than in one which has highly reflective surfaces.
SETUP Setting sound program parameters (Sound Program menu) Reverb Level Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the stronger the reverberation becomes. 2ch Stereo only Direct 0 to 100% Level Adjustable range Parameters usable in certain sound programs Automatically bypasses the DSP circuit and tone control circuit depending on the condition of tone control etc., when an analog audio source is played back. You can enjoy a higher quality sound.
SETUP Setting sound program parameters (Sound Program menu) Front Presence R Level Parameters usable in surround decoder Adjusts the volume of the front presence R channel. J1 Adjustable range 0 to 100% Default setting 33% Decode Type Selects a surround decoder. Pro Logic Reproduces sound using the Dolby Pro Logic decoder. This is suitable for all kinds of audio sources. PLIIx Movie / PLII Movie Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder.
SETUP MAIN ZONE 2 Setting various functions (Setup menu) CODE SET SOURCE RECEIVER Various settings, such as speaker volume or HDMI functions, can be changed from the Setup menu. HDMI 1 2 3 4 AUDIO 5 V-AUX 1 2 Operating the Setup menu AV 1 2 3 4 5 6 MULTI DOCK Setup menu setting Speaker Adjusts parameters for speakers, such as speaker status, and volume adjustment for each speaker (☞p. 79).
SETUP Setting various functions (Setup menu) Setup menu Manages settings for speakers ■ Manual speaker setup Manual Setup The following parameters can be specified manually.
SETUP Setting various functions (Setup menu) Configuration Adjusts the output characteristics of the speakers based on manually set parameters. In the “Configuration,” you can select the speaker size characteristic (Large or Small). Select the size (sound reproduction capacity) that matches your speakers. Front Selects the size (sound reproduction capacity) of the front speakers. J1 Large Small (Default) Select this for large speakers.
SETUP Setting various functions (Setup menu) Subwoofer Confirms the subwoofer. Use (Default) Select this when subwoofer is connected. During playback, the subwoofer will produce audio from the LFE (low-frequency effect) channel and bass audio from other channels. J1 None Select this when subwoofer is not connected. The front speakers will produce audio from the LFE (lowfrequency effect) channel and bass frequency audio from other channels.
SETUP MAIN Setting various functions (Setup menu) ZONE 2 CODE SET SOURCE RECEIVER Parametric EQ HDMI 1 2 3 4 5 V-AUX 1 2 3 4 Adjusts sound quality of tone using a parametric equalizer. AUDIO AV 1 5 2 6 MULTI PEQ Select Select an equalizer type. DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY BD DVD TV PRESET TUNING Manual Manually adjust equalizer sound. Flat Adjust individual speakers to achieve the same characteristics.
SETUP Setting various functions (Setup menu) Setting the audio output function of this unit ■ Synchronizing audio/video output Mode Selects a compensation method for the delay between audio and video output. Auto (Default) J1 Lipsync Adjusts the delay between video and audio output. Dynamic Range Selects the dynamic range adjustment method for Dolby Digital and DTS playback. Max Volume Sets the maximum volume for this receiver.
SETUP Setting various functions (Setup menu) ■ Setting the startup volume Setting this unit’s video output function Initial Volume Sets the initial volume for when this receiver is turned on. When this parameter is set to “Off,” the volume is set at the level when the receiver last entered standby mode. J1 Adjustable range Off, Mute, -80 dB to +16.5 dB Default setting Off Adjustment increments 0.
SETUP Setting various functions (Setup menu) ■ Adjusting resolution and aspect ratio with conversion of video signal to HDMI Through (Default) The aspect ratio of HDMI video signal sources is not adjusted. 16:9 Normal Transmits 4:3 aspect ratio video signals to a 16:9 TV with black bands on either side of the screen. Processing Adjust resolution and aspect ratio with conversion of video input to HDMI video (upscaling). Off (Default) Resolution and aspect ratio are not adjusted with processing.
SETUP Setting various functions (Setup menu) ■ Receiver operation via TV (HDMI Control) ■ Listening to TV audio via single HDMI cable (Audio Return Channel) ■ Selecting an input source to assign audio input for the TV HDMI Control Set the HDMI Control function to “On” to operate devices connected via HDMI. If the TV or other external components support HDMI Control (e.g.
SETUP Setting various functions (Setup menu) ■ Specify whether or not audio signal is output through this unit and a TV Audio Output OUT2 Specify whether or not audio signal is output through a TV connected via the HDMI OUT 2 jack. Off (Default) Choose whether audio is played back through this unit or through a TV. Amp Specify whether or not audio signal is output through this unit. Off Audio is not output through this unit. On (Default) Audio is output through this unit.
SETUP Setting various functions (Setup menu) Setting this unit’s multi-zone function ■ Adjusting Zone2 volume Making the receiver easier to use Zone2 Set Max Volume Specify the maximum volume level in Zone2 so that sound is not too loud. Adjustable range -30.0 dB to +16.5 dB (maximum volume) Default setting +16.5 dB Adjustment increments 5.0 dB Multi Zone Setup items Zone2 Set Adjusts Zone2 volume level. Party Mode Set Enable or disable the party mode function.
SETUP Setting various functions (Setup menu) ■ Goes enter standby mode automatically when you leave it without operating ■ Specifying menu display Display Set Auto Power Down If you do not operate this unit or use the remote control for an extended period of time, it will automatically go into standby mode (Auto Power Down function). This function’s default setting is “Off.” When you want to enable this function, set the amount of time to pass before this unit will enter standby.
SETUP Setting various functions (Setup menu) ■ Setting TRIGGER OUT functions Trigger Output Sets the TRIGGER OUT jack to function synchronized with power status of each zone or input switching. Target Zone Specify the zone with which the TRIGGER OUT jack functions synchronized. Main (Default) Trigger Mode Specify the condition for the TRIGGER OUT jack to function. Power (Default) Source Manual The TRIGGER OUT jack functions synchronized with the power status of the zone specified with “Target Zone.
SETUP Setting various functions (Setup menu) ■ Prohibiting setting changes Memory Guard Prohibits setting changes to prevent careless changes being made to the settings on Setup menu. Off (Default) Settings are not protected. On Prohibits changes to the settings on Setup menu until it is returned to “Off.” While set to “On,” the unit displays “Memory Guard!” when an attempt is made to change the settings. Language Select the language used for display of menus and messages.
SETUP MAIN ZONE 2 Confirming information of this unit (Information menu) CODE SET SOURCE RECEIVER A variety of information for this unit can be displayed. HDMI 1 2 3 4 AUDIO 5 V-AUX 1 2 Selecting information AV 1 2 3 4 5 6 MULTI DOCK HDMI OUT TUNER 1 PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET TUNING Press jON SCREEN. ENHANCER SUR. DECODE TV Displays information on the current video signal. Format Signal format.
SETUP MAIN ZONE 2 CODE SET SOURCE RECEIVER c p You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code). The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
SETUP MAIN Controlling other components with the remote control ZONE 2 CODE SET o SOURCE RECEIVER HDMI 1 2 3 4 5 V-AUX 1 2 4 d Default remote control code settings Registering remote control codes for external component operations The following remote control codes are assigned to input sources as factory default settings. For a complete list of available remote control codes, refer to “Remote Control Code Search” in the CD-ROM.
SETUP MAIN Controlling other components with the remote control ZONE 2 CODE SET SOURCE RECEIVER o p HDMI 1 2 3 5 V-AUX 1 4 d AUDIO 4 Enter a remote control code “2064” using mNumeric keys. J1 2 AV 1 2 3 4 5 6 MULTI DOCK 2 PHONO FM AM INFO MEMORY PRESET TUNING Registration successful: blinks twice Registration failed: blinks 6 times ENHANCER SUR.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. Displaying/Setting the Advanced Setup menu 3 Rotate PROGRAM selector to select the item to be set from the following items. Setting the impedance of speakers In the Advanced Setup menu, you can set the following settings. 1 2 Switch this unit to the standby mode.
SETUP MAIN Extended functionality that can be configured as needed (Advanced Setup menu) ZONE 2 CODE SET SOURCE RECEIVER o p HDMI 1 2 3 5 V-AUX 1 4 AUDIO 2 Avoiding crossing remote control signals when using multiple Yamaha receivers AV 1 2 3 4 5 6 MULTI DOCK HDMI OUT TUNER FM AM MEMORY MOVIE MUSIC SLEEP PARTY PRESET REMOTE ID -ID1 TUNING The remote control of the unit can only receive signals from a receiver which has an identical ID (remote control ID).
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) Changing FM/AM frequency steps (Asia and General models only) Initializing various settings for this unit INIT- CANCEL TU - AM9/FM50 You can select one of the following FM/AM frequency steps: J1 AM10/FM100 AM9/FM50 (Default) You can adjust the AM frequency by steps of 10kHz and FM by steps of 100kHz. You can adjust the AM frequency by steps of 9kHz and FM by steps of 50kHz.
SETUP Using the HDMI Control function This unit supports the HDMI Control function, which allows you to operate external components via HDMI. If devices that support HDMI Control (e.g., Panasonic VIERA Link-compatible TVs, DVD/Blu-ray Disc players, etc.
SETUP MAIN Using the HDMI Control function ZONE 2 CODE SET SOURCE RECEIVER 1 2 3 5 V-AUX 1 2 4 4 AUDIO AV 1 2 3 5 6 MULTI DOCK HDMI OUT TUNER FM PHONO AM PRESET INFO MEMORY MOVIE MUSIC SLEEP PARTY TUNING ENHANCER SUR. DECODE TV CD j RADIO OPTION ON SCREEN To use other jacks to input audio signals from TV, carry out the following procedure. When the HDMI Control (☞p.
SETUP MAIN Using the HDMI Control function ZONE 2 CODE SET SOURCE RECEIVER 6 HDMI 1 2 3 4 5 V-AUX 1 2 1 2 3 4 5 6 MULTI AUDIO Make sure that “HDMI Control” is “On” When “HDMI Control” is set to “Off,” press kENTER and kCursor B / C to set to “On.” AV Press kCursor C to select “Control Select” and press kENTER. DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET Use kCursor B / C to select the HDMI OUT jack connected to the TV.
SETUP MAIN Using the HDMI Control function ZONE 2 CODE SET SOURCE RECEIVER HDMI 1 2 3 4 5 V-AUX 1 1 2 3 4 5 6 MULTI DOCK AUDIO 5 Make sure that “HDMI Control” is “On.” 6 7 8 9 Press kCursor C to select “Control Select” and press kENTER. 2 When “HDMI Control” is set to “Off,” press kENTER and kCursor B / C to set to “On.” AV HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET TUNING ENHANCER SUR.
SETUP Using multi-zone configuration This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reproduce separate input sources in the main zone and the second zone (Zone2). You can control this unit from the second zone using the supplied remote control. From the ZONE2 OUT jacks ■ Using the external amplifier An amplifier located in the secondary zone can be connected to this unit as shown below.
SETUP MAIN ZONE 2 CODE SET SOURCE RECEIVER Using multi-zone configuration b q Controlling Zone2 Using the party mode The remote control can be used to select and control Zone2 devices. The available operations are as follows: Use this feature to play main zone sources in Zone2 simultaneously. This feature is useful when you want to play back main sources as background music in a home party, etc. When using the party mode, set “Party Mode Set” to “Enable” (☞p. 88).
APPENDIX Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Problem Cause Remedy See page The power will not turn on. The protection circuitry operated 3 times consecutively.
APPENDIX Troubleshooting Problem No picture. No sound is output from a specific speaker. See page Cause Remedy The video signal output from this unit is not supported by a monitor connected to this unit via the HDMI OUT 1-2 jacks. Displays the Advanced Setup menu and select “VIDEO” in “INIT” to reset the video parameters. 98 Displays the Advanced Setup menu and set “MON.CHK” to “YES.” 97 An appropriate video input is not selected on the TV. Select an appropriate video input on the TV.
APPENDIX Troubleshooting Problem Cause Remedy See page The audio input sources cannot be played in the desired digital audio signal format. The connected component is not set to output the desired digital audio signals. There is noise interference from digital or radio frequency equipment. This unit is too close to other digital or radio frequency equipment. Noise/hum noise is heard. Incorrect cable connection. Connect the audio cables properly.
APPENDIX Troubleshooting Tuner (FM/AM) AM FM Problem FM stereo reception is noisy. Cause You are too far from the station transmitter, or the input from the antenna is weak. Remedy See page Check the antenna connections. 31 Switch to monaural mode. 57 Replace the outdoor antenna with a more sensitive multi-element antenna. — Adjust the antenna height or orientation, or place it in a different location. — There is distortion, and clear reception cannot be obtained even with a good FM antenna.
APPENDIX Troubleshooting iPod™/iPhone™ Display Loading... Connect error Bluetooth™ Cause Remedy See page The unit is in the process of recognizing the connection with your iPod/iPhone. — The unit is in the middle of acquiring song lists from your iPod/iPhone. — There is a problem with the signal path from your iPod/iPhone to the unit. Turn off the unit and reconnect the Universal Dock for iPod/iPhone to the DOCK jack of the unit.
APPENDIX Troubleshooting Remote control Problem The remote control does not work or function properly. External components cannot be controlled using the remote control. Cause Remedy See page Wrong distance or angle. The remote control will function within a maximum range of 6 m, and no more than 30 degrees off-axis from the front panel. — Direct sunlight or lighting (from an inverter type of fluorescent lamp, strobe light, etc.) is striking the remote control sensor of this unit.
APPENDIX Glossary Audio information Audio and video synchronization (Lipsync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem, and the capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustment, HDMI version 1.
APPENDIX Glossary DSD Direct Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio CDs. Using DSD, signals are stored as single bit values at a high-frequency sampling rate of 2.8224 MHz, while noise shaping and oversampling are used to reduce distortion, a common occurrence with very high quantization of audio signals. Due to the high sampling rate, better audio quality can be achieved than that offered by the PCM format used for normal audio CDs.
APPENDIX Glossary “x.v.Color” A color space standard supported by HDMI version 1.3. It is a more extensive color space than sRGB, and allows the expression of colors that were not hitherto possible. While remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color space, and can thus produce more vivid, natural images. It is particularly effective for still pictures and computer graphics.
APPENDIX Information on HDMI™ ■ HDMI signal compatibility NOTES Audio signals Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc.
APPENDIX Specifications ■ Input jacks ■ Remote jacks ■ TUNER • Analog audio Audio x 6 (PHONO, AV5, AV6, AUDIO1, AUDIO2, V-AUX) MULTI CH INPUT x 1 (8ch Input) • Digital audio Optical x 2 (AV1, AV4) Coaxial x 2 (AV2, AV3) • Video Composite x 5 (AV3, AV4, AV5, AV6, V-AUX) S-Video x 1 (AV5) [U.K. and Europe models] Component x 2 (AV1, AV2) • HDMI input HDMI (Front Panel) x 1 (V-AUX) HDMI (Rear Panel) x 5 (HDMI 1-5) • Other DOCK x 1 (AUDIO, VIDEO [Composite]) • REMOTE IN x 1 • Analog Tuner [U.K.
APPENDIX Specifications • Headphone Jack Rated Output/Impedance AV5, etc. (1 kHz, 50 mV, 8 Ω) ..................................100 mV/560 Ω • Frequency Response AV5 to FRONT..................................... 10 Hz to 100 kHz, +0/-3 dB • Total Harmonic Distortion PHONO (20-20 kHz, 1V)............................................ 0.02% or less AV5, etc. to FRONT (PURE DIRECT) (20-20 kHz, 50 W, 8 Ω) ............................................ 0.
APPENDIX Index Numerics 5 channel speaker layout .............................................................. 15 5.1-channel speaker layout........................................................... 15 7.1-channel speaker connection ................................................... 17 7.1-channel speaker layout........................................................... 14 A Adaptive DRC, OPTION menu ................................................... 52 Advanced Setup menu .............................
APPENDIX Index Load, SCENE menu..................................................................... 71 Low-frequency sound adjustment................................................ 41 Pure Direct mode......................................................................... 45 R M Manual Preset............................................................................... 56 Manual Setup, Speaker Setup ...................................................... 79 Manual Tuning................................
APPENDIX Index Y YPAO........................................................................................... 32 Z Zone2 Set, Multi Zone .................................................................
© 2010 Yamaha Corporation YC515A0/OMEN1