C English Français AV Receiver/Ampli-tuner audio-vidéo Easy Setup Guide Manuel de configuration rapide
1 Preparation AV Receiver Accessories Check that the following accessories are supplied with the product. Remote control Batteries (AAA, R03, UM-4) (x2) Insert the batteries the right way round. Easy Setup Guide AM antenna English YPAO microphone *The supplied FM antenna varies depending on the region of purchase. CD-ROM (Owner’s Manual) This document explains how to set up a 5.1- or 7.1-channel system and play back surround sound from a BD/DVD on the unit.
2 Placing speakers Set up the speakers in the room using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.
3 Connecting speakers/subwoofer • Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” in “Owner’s Manual”. 1 Connect the front speakers (1/2) to the FRONT (//\) terminals. • Use a subwoofer equipped with built-in amplifier. 2 Connect the center speaker (3) to the CENTER terminal.
3 Connect the surround speakers (4/5) to the SURROUND (//\) terminals. 4 Connect the subwoofer (9) to the SUBWOOFER PRE OUT (1) jack. • Use a subwoofer equipped with built-in amplifier. EXTRA SP ZONE2/F PRESENCE EXTRA SP ZONE2/F PRESENCE The unit (rear) SPEAKERS CENTER Connect the surround back speakers (6/7) to the SURROUND BACK (//\) terminals. XTRA SP ZONE2 F PRESENCE The unit (rear) FRONT For 7.
4 Connecting external devices Before connecting the power cable (General model only) Make sure you set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz. TV Audio out (optical) HDMI in HDMI out HDMI HDMI BD/DVD player OPTICAL HDMI O HDMI b c a HDMI HDMI HDMI OUT 1 ( H I1 HDMI 1 jack ) 2 ARC d Connect the power cable to an AC wall outlet.
5 Optimizing the speaker settings automatically (YPAO) 1 The following screen appears on the TV. The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. • During the measuring process, test tones are output at high volume. Ensure that the test tones do not frighten small children.
3 4 Use the cursor keys to select “Save/Cancel” and press ENTER. Use the cursor keys to select “SAVE” and press ENTER. If “W-1:Out of Phase” appears Follow the procedure below to check the speaker connections. a Use the cursor keys to select “Result” and press ENTER. b Use the cursor keys to select “Wiring”. c Check the cable connections (+/–) of the speaker that was identified as being “Reverse” in the warning message.
6 Playing back a BD/DVD Now let’s play back a BD/DVD. We recommend playing back multichannel audio (5.1-channel or more) to feel surround sound produced by the unit. Many more features! 1 VOL HDMI1 RECEIVER SOURCE Press HDMI 1 to select “HDMI 1” as the input source. L SL SW C R SR HDMI HDMI 1 1 5 V AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MA N PARTY ZONE 2 2 2 3 TV NET PROGRAM MUTE Press STRAIGHT repeatedly to select “STRAIGHT”.
1 Préparation Ampli-tuner audio-vidéo Accessoires Vérifiez que les accessoires suivants sont fournis avec le produit. Télécommande Manuel de configuration rapide Français Ce document décrit la configuration d’un système à 5.1 ou 7.1 voies et explique comment restituer le son d’ambiance d’un disque BD/DVD sur l’unité. Afin de préserver l’environnement, le Mode d’emploi de ce produit est fourni sur CD-ROM. Pour en savoir plus sur ce produit, reportez-vous au Mode d’emploi fourni sur CD-ROM.
2 Installation des enceintes Installez les enceintes dans la pièce en vous reportant au diagramme suivant. Pour obtenir des informations sur les autres systèmes d’enceinte, consultez le « Mode d’emploi ». Système à 5.1 voies Système à 7.
3 Raccordement des enceintes/du caisson de graves • L’unité est configurée pour des enceintes 8 ohms par défaut. Lorsque vous raccordez des enceintes 6 ohms, réglez l’impédance d’enceinte de l’unité sur « 6 Ω MIN ». Pour plus d’informations, reportez-vous à la section « Réglage de l’impédance des enceintes » du « Mode d’emploi ». 1 Raccordez les enceintes avant (1/2) aux bornes FRONT (//\). 2 Raccordez l’enceinte centrale (3) à la borne CENTER.
3 Raccordez les enceintes d’ambiance (4/5) aux bornes SURROUND (//\). 4 Raccordez le subwoofer (9) à la prise SUBWOOFER PRE OUT (1). • Utilisez un subwoofer équipé d’un amplificateur intégré. EXTRA SP ZONE2/F PRESENCE EXTRA SP ZONE2/F PRESENCE L’unité (arrière) L’unité (arrière) SPEAKERS CENTER Raccordez les enceintes surround arrière (6/7) aux bornes SURROUND BACK (//\). XTRA SP ZONE2 F PRESENCE L’unité (arrière) FRONT Pour le système à 7.
4 Raccordement des appareils externes Avant de raccorder le câble d’alimentation (modèle standard uniquement) Vérifiez que vous sélectionnez la position de permutation de VOLTAGE SELECTOR en fonction de la tension locale. Les tensions sont CA 110-120/220-240 V, 50/60 Hz.
5 Optimisation automatique des réglages d’enceintes (YPAO) 1 Raccordez le microphone YPAO à la prise YPAO MIC sur le panneau avant. L’écran suivant apparaît sur le téléviseur. La fonction Yamaha Parametric room Acoustic Optimizer (YPAO) permet de détecter les raccordements des enceintes et de mesurer la distance entre ces dernières et la position d’écoute.
3 4 Utilisez les touches de curseur pour sélectionner « Save/Cancel » et appuyez sur ENTER. Utilisez les touches de curseur pour sélectionner « SAVE » et appuyez sur ENTER. Si le message « W-1:Out of Phase » apparaît Suivez la procédure ci-dessous pour vérifier les raccordements de l’enceinte. a Utilisez les touches de curseur pour sélectionner « Result » et appuyez sur ENTER. b Utilisez les touches de curseur pour sélectionner « Wiring ».
6 Lecture d’un disque BD/DVD Voyons maintenant comment lire un disque BD/DVD. sur HDMI 1 pour sélectionner 1 Appuyez « HDMI 1 » comme source d’entrée. Pour sentir les effets d’ambiance sonore produits par l’unité, nous vous recommandons de lire les disques avec le système audio multivoies (5.1 voies et plus). RECEIVER SOURCE HDMI HDMI 1 1 5 V AUX AV 1 2 3 4 5 6 1 TUNER USB NET PARTY ZONE 2 TV NET SW C R SR Commencez la lecture sur le lecteur BD/DVD.
© 2013 Yamaha Corporation Printed in Malaysia ZF59310