Owner's Manual

Other speaker systems (basic setup)
5.2.4-channel system
To have a full effect of Dolby Atmos or DTS:X content, we recommend this speaker system. This speaker
system uses the front and rear presence speakers to produce a highly-natural 3-dimensional sound field.
This system is suited for enjoying not only 5.1-channel but also for 7.1-channel contents.
[Search tag]#Q01 Speaker systems
4
1
2
9 9
5
3
R
Y
10° to 30°
10° to 30°
0.5 to 1 m (1.6
to 3.3 ft)
0.5 to 1 m (1.6
to 3.3 ft)
1.8 m (5.9 ft) 1.8 m (5.9 ft)
1.8 m (5.9 ft)1.8 m (5.9 ft)
NOTE
(
When installing the front/rear presence speakers on the ceiling above the listening position, or when using Dolby Enabled speakers
as the front/rear presence speakers, the front/rear presence speaker layout settings must be changed.
(
You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the
separate sounds, and so you can place them on the left/right or front/rear sides of the room. In this case, their layout settings must
be changed.
(
When using only one subwoofer, you can place it either in the left or right side.
Related links
(
“Speaker requirements”(p.84)
(
“Setting the layout of the front presence speakers”(p.228)
(
“Setting the layout of the rear presence speakers”(p.229)
(
“Setting the layout of the subwoofers”(p.233)
43
PREPARATIONS > How to place speakers (speaker systems)