Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Features
- HDMI Information
- Supplied Accessories
- Parts & Controls
- Connections
- Getting Started
- Basic Operation
- Advanced Setup / Menu Operation
- Remote Control Operation
- Troubleshooting
- Glossary
- Specs
- Remote Control Codes
- Index
- Correction to Manual
- Front Panel Diagram
- Remote Control Diagram
- XM Channel Guide
- Warranty
QUIck
start
gUIde
Place your speakers in the room and connect them to this
unit.
Be
sure to connect the left channel (L), right channel
(R),
"+" (red) and
"-"
(black) properly.
Front speakers and center speaker
Tighten
To
the center speaker
Insert /
+~+~
To
the
front
right
speaker
Loosen
Speaker terminals
PRE
OUT SUBWOOFER 1 jack
1 Place your speakers and subwoofer in the
room.
To
the front left
speaker
2 Connect speaker cables
to
each speaker.
Be sure to connect the
"+"
(red) and
"-"
(black) properly.
Cables are colored or shaped differently, perhaps with a
stripe, groove or ridge. Connect the striped (grooved, etc.)
cable to the
"+"
(red) terminals
of
this unit and your speaker.
Connect the plain cable to the
"-"
(black) terminals.
3 Connect each speaker cable
to
the
corresponding speaker terminal
of
this
unit,
Surround and surround back speakers
To
the surround
back left speaker
To
the surround
To
the surround
left speaker back right speaker
4 Connect the subwoofer cable
to
the
SUBWOOFER
PRE
OUT 1 jack
of
this
unit
and the
input
jack
of
the subwoofer.
Subwoofer
AV
receiver
SUBWOOFER
PRE
OUT 1 jack
CD
Make sure that this unit and the subwoofer are
unplugged from the AC wall outlets.
® Twist the exposed wires
of
the speaker cables
together to prevent short circuits.
@ Do not let the bare speaker wires touch each
other.
@ Do not let the bare speaker wires touch any
metal part
of
this unit.
.....
---
,',
=
~
0
{Q...
:
~
..
-~
I
\ I
.,
I
..
-,
......
~----
L
Input jack
.......
",
Subwoofer cable
~'<i<-:.
You
can also connect another subwoofer to the SUBWOOFER
PRE
OUT
2 jack.
6En