Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Features
- HDMI Information
- Supplied Accessories
- Parts & Controls
- Connections
- Getting Started
- Basic Operation
- Advanced Setup / Menu Operation
- Remote Control Operation
- Troubleshooting
- Glossary
- Specs
- Remote Control Codes
- Index
- Correction to Manual
- Front Panel Diagram
- Remote Control Diagram
- XM Channel Guide
- Warranty
CustomIzing
thIs
umt
(MANUAL
SETUP)
• Initial configuration
D)
ItHT.
COt-1FII3
Use this feature to select the settings
of
the audio input
jack select, active decoders and extended surround when
you tum on this unit.
•
HOMI
set
E)HDt11
SET
Use this feature to select the component to play back
HDMI audio signals.
E)HDt'1I
SET
D)HHT.
CONFIG
S.
RUDIO·····RX-V663
~
RUDIO
SELECT··RUTO
DECODER
MODE··RUTO
EXTD
SUR.·····RUTO
[<l]/[~]:
Selecl
[EtHER]:
Relurn
[<l]/[~]:
Selecl
[ENTER]:
Relurn
Plays back HOMI audio signals on another
HOMI component connected to the HOMI OUT
jack.
Plays back HOMI audio signals on this unit. The
HOMI audio signals input at the HOMI input
jacks
of
this unit are not output to the HOMI
component connected to the HOMI OUTjackon
the rear panel
of
this unit.
OTHER
RX-V663
• This unit transmits audio
and
video signals input at the HDMI
input
jacks
to the
HDMI
out
jack
only when this unit
is
turned
on
even
if
"S.AUDIO"
is set to
"OTHER"
.
• Available audio/video signals
depend
on
the specification
of
the
connected
video monitor. Refer to the instruction manual
of
each
connected
component.
Support audio S.
RUD
I 0
Use this feature to select whether to play back HDMI
audio signals on this unit
or
on another HDMI component
connected to the HDMI OUTjack on the rear panel
of
this
unit.
Automatically detects the type
of
input signals
and select the appropriate decoder mode setting.
Automatically selects the last input jack select
setting used for the connected input source.
Automatically detects the type
of
input signals
and selects the appropriate audio input jack
select setting.
AUTO
LAST
AUTO
Decoder mode
DECODER
t10DE
Use this feature to designate the default decoder mode
(see page 94) for the input sources connected to the
DIGITAL INPUTjacks when you tum on the power
of
this unit.
Audio select
RUD
I 0
SELECT
Use this feature to designate the default audio input
jack
select setting (see page 44) for the input sources connected
to the DIGITAL INPUT jacks when you tum on the power
of
this unit.
LAST
Automatically selects the last decoder mode
setting used for the connected input source.
Extended surround
E::<TD
SUR.
Use this feature to designate the extended decoder mode
(see page 92) for the input sources connected to the
DIGITAL INPUT jacks when you tum on the power
of
this unit.
AUTO
Automatically detects the digital audio input
signals and activates the appropriate decoder.
LAST
Automatically selects the last decoder mode set
for "EXTO SUR."
in
"SOUND MENU".
98 En