Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Features
- HDMI Information
- Supplied Accessories
- Parts & Controls
- Connections
- Getting Started
- Basic Operation
- Advanced Setup / Menu Operation
- Remote Control Operation
- Troubleshooting
- Glossary
- Specs
- Remote Control Codes
- Index
- Correction to Manual
- Front Panel Diagram
- Remote Control Diagram
- XM Channel Guide
- Warranty
• Zone 2 settings F
)ZOt'~E2
SET
F)ZONE2
SET
..
t'lAX
VOL.··
·+16.5dB
INIT.
VOL.·····OFF
[
...
]/['~]:
Up/Down
[-<1]/['-]:
Adjust
Zone
2 Maximum volume
t1~~<
I.JOL.
Use this feature to set the maximum volume level in the
Zone
2.
Control range:
-30.0
dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB
• The "MAX VOL." setting takes priority over the "INI.VOL."
setting. For example, when "INI.VOL."
is
set to
-20.0
dB and
then "MAX
VOL."
is
set to
-30.0
dB, the volume level
is
automatically set to
-30.0
dB when you turn on the power
of
this unit next time.
• The "MAX VOL." setting does not affect the output level at the
"ZONE 2
OUT'
jacks.
Zone 2 Initial volume un .I')OL.
Use this feature to set the volume level
of
Zone 2 when the
power
of
this unit is turned on.
Choices: OFF, MUTE,
-80.0
dB to +16.5 dB
Control step: 0.5 dB
• The "MAX
VOL."
setting takes priority over the "INI.VOL."
setting.
• When you select "FRONT B", "PRNS", "Zone B", or "NONE"
in
"EXTRA SP ASSIGN" (see page 85), "Zone 2 SP Not
Assigned" appears
in
the OSD and the "ZONE2 SET"
parameter
is
not available.
• The "INI.
VOL."
setting does not affect the output level at the
"ZONE 2 OUT" jacks.
CustomIZIng
this
umt
(MANUAL
SETUP)
99
En
•