Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Features
- HDMI Information
- Supplied Accessories
- Parts & Controls
- Connections
- Getting Started
- Basic Operation
- Advanced Setup / Menu Operation
- Remote Control Operation
- Troubleshooting
- Glossary
- Specs
- Remote Control Codes
- Index
- Correction to Manual
- Front Panel Diagram
- Remote Control Diagram
- XM Channel Guide
- Warranty
Connections
• If the input source component can decode the bitstream audio
signals
of
audio commentaries, you can play back the audio
sources with the audio commentaries mixed down by using the
following connections:
- multi-channel analog audio input (see page 25)
- DIGITAL INPUT OPTICAL (or COAXIAL)
• Refer to the supplied instruction manuals
of
the input source
component, and set the component appropriately.
2ch Linear 2ch, 32-192 kHz, CD, DVD-Video,
PCM
16/20/24 bit
DVD-Audio, etc.
Multi-ch 8ch, 32-192 kHz, DVD-Audio, Blu-
Linear PCM
16120/24 bit
ray Disc, HD DVD,
etc.
DSD 215.lch, SA-CD,etc.
2.8224 MHz, I bit
Bitstream
Dolby Digital,
DVD-Video, etc.
DTS
• HOMI signal compatibility
Audio signals
HOMI cable plug
HOMI
C )
t
Video signals
This unit is compatible with the video signals
of
the
following resolutions:
Video signal format
480il60 Hz
576i150
Hz
48Op/60 Hz
576p/50
Hz
72Op/60 Hz, 50 Hz
1080il60 Hz, 50 Hz
1080p/60 Hz, 50 Hz, 24 Hz
Default input assignment
of
HDMI input jacks
-~.,
....
:
..
INI
DVD
IN2jTV/CBL
• HOMI jack and cable plug
Blu-ray Disc,
HDDVD,etc.
Dolby TrueHD,
Dolby Digital Plus,
DTS-HD Master
Audio, DTS-HD High
Resolution Audio,
DTS Express
Bitstream (High
definition audio)
• When CPPM copy-protected DVD-Audio
is
played back, video
and audio signals may not
be
output depending on the type
of
the DVD player.
• This unit
is
not compatible with HDCP-incompatible HDMI or
DVI components.
• To decode audio bitstream signals on this unit, set the input
source component appropriately so that the component outputs
the bitstream audio signals directly (does not decode the
bitstream signals on the component). Refer to the supplied
instruction manuals for details.
• This unit
is
not compatible with the audio commentary features
(for example, the special audio contents downloaded via Internet)
of
Blu-ray Disc or HD DVD. This unit does not play back the
audio commentaries
of
the Blu-ray Disc or HD DVD contents.
•
We
recommend that you use an HDMI cable shorter than 5
meters (16 feet) with the HDMI logo printed on it.
• Use a conversion cable (HDMI
jack
B DVI-D jack) to connect
this unit to other DVI components.
• Do not disconnect or connect the cable or turn offthe power
of
the HDMI components connected to the HDMI
OUT
jack
of
this unit while data
is
being transferred. Doing so may disrupt
playback
or
cause noise.
•
If
you tum off the power
of
the video monitor connected to the
HDMI OUT
jack
via a DVI connection, this unit may fail to
establish the connection to the component.
• The analog video signals input at the composite video, S-video
and component video jacks can be digitally up-converted to
be
output at the HDMI OUT jack. Set "VIDEO CONV." to "ON"
in "MANUAL SETUP" (see page 97) to activate this feature.
18 En