Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Features
- HDMI Information
- Supplied Accessories
- Parts & Controls
- Connections
- Getting Started
- Basic Operation
- Advanced Setup / Menu Operation
- Remote Control Operation
- Troubleshooting
- Glossary
- Specs
- Remote Control Codes
- Index
- Correction to Manual
- Front Panel Diagram
- Remote Control Diagram
- XM Channel Guide
- Warranty
ConnectIons
• Audio signal flow
• Video signal flow
Input
Output
Input
Output
HDMI
l J
-------.
..
l J
------
....
l J
HDMI
l J
COMPONENT
VIDEO
@(§)@ ~---r--,~@@@
SVIDEO
0
VIDEO
(§)
----
..
~
Through
Digital
output
@ -------------c.(§)
(§) (§)
AUDIO
______
t>
Analog
output
----t>
Video conversion
ON
(see page 97)
• 2-channel as well as multi-channel PCM, Dolby Digital and
DTS signals input at one
of
the HDMI IN jacks can be output at
the HDMI OUT jack only when "S.AUDIO"
is
set to "OTHER"
(see page 98).
• Audio signals input at the HDMI IN jacks are not output at the
AUDIO output and DIGITAL OUTPUT jacks.
• When the video signals are input at the HDMI, COMPONENT
VIDEO, S VIDEO, and VIDEO jacks, the priority order
of
the
input signals
is
as follows:
I.HDMI
2.
COMPONENT VIDEO
3.
S VIDEO
4. VIDEO
• Digital video signals input at one
of
the
HDMIIN
jacks cannot
be output from analog video output jacks.
• The analog component video signals with
480i (NTSC)/576i (PAL)
of
resolution are converted to the
S-video or composite video signals and output at the S VIDEO
MONITOR OUT and VIDEO MONITOR OUT jacks.
• The analog component video signals with I080p
of
resolution
are only output at the COMPONENT VIDEO MONITOR OUT
jacks.
•
19En