Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Features
- HDMI Information
- Supplied Accessories
- Parts & Controls
- Connections
- Getting Started
- Basic Operation
- Advanced Setup / Menu Operation
- Remote Control Operation
- Troubleshooting
- Glossary
- Specs
- Remote Control Codes
- Index
- Correction to Manual
- Front Panel Diagram
- Remote Control Diagram
- XM Channel Guide
- Warranty
Approximately 6 m (20 ft)
t
@ SP A B
indicators
Light up according to the set
of
front speakers activated
(see page 43).
SP
A:
The FRONT A speakers are activated.
SP B: The FRONT B speakers are activated.
SP A
B:
The FRONT A and FRONT B speakers are
activated.
@ ZONE2
indicator
Lights up when Zone 2
is
turned on (see page 104).
@ DSP
indicators
The respective indicator lights up when any
of
the sound
field programs are selected (see page 48).
CINEMA DSP
indicator
Lights up when you select a CINEMA DSP sound
field program (see page 48).
VIRTUAL
indicator
Lights up when the Virtual CINEMA DSP mode is
active (see page 51).
SILENT CINEMA
indicator
Lights up when headphones are connected and a
sound field program is selected (see page 51).
® Multi-information
display
Shows the name
of
the current sound field program and
other information when adjusting or changing settings.
@ SLEEP
indicator
Lights up while the sleep timer is on (see page 47).
@)
Input
channel and speaker
indicators
~
LFE indicator
[!J
~
[BjJ
Presence speaker indicators
~
I58
Il§BI
Input channel indicators
ISBLI
ISBRI
Input
channel
indicators
• Indicate the channel components
of
the current
digital input signal.
• Light up or flash according to the settings
of
the
speakers when this unit is in the automatic setup
procedure (see page 32)
or
in the "BASIC MENU"
in
"MANUAL SETUP" (see page 87).
Presence speaker
indicators
Light
up
or
flash according to the setting
of
"EXTRA
SP ASSIGN" when this unit is
in
the automatic setup
procedure (see page 32)
or
in
the "BASIC MENU"
in
"MANUAL SETUP" (see page 85).
~\¥~
You
can make settings for the presence and surround back
speakers automatically by running "AUTO SETUP" (see
page 32) or manually by adjusting settings for "SUR.B
UR
SP" (see page 86)
in
"SPEAKER SET".
Connections
The remote control transmits a directional infrared
ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
,CDlnfrared
window
Outputs infrared control signals. Aim this window at the
component you want to operate.
~'rt'~
To
set the remote control codes for other components, see
page 102.
•
Do
not spill water or other liquids on the remote control.
• Do not drop the remote control.
•
Do
not leave or store the remote control
in
the following types
of
conditions:
- places
of
high humidity, such as near a bath
- places
of
high temperature, such as near a heater or stove
- places
of
extremely low temperatures
- dusty places
31
En
•