Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Features
- HDMI Information
- Supplied Accessories
- Parts & Controls
- Connections
- Getting Started
- Basic Operation
- Advanced Setup / Menu Operation
- Remote Control Operation
- Troubleshooting
- Glossary
- Specs
- Remote Control Codes
- Index
- Correction to Manual
- Front Panel Diagram
- Remote Control Diagram
- XM Channel Guide
- Warranty
ENE tern fates
You
can create your original SCENE templates for each
SCENE button.
You
can refer to the preset
18
SCENE
templates to create the original SCENE templates.
3 Press ®
11/
'V
to select the desired parameter
of the SCENE template and then
®<J
/
[>
to
select the desired value of the selected
parameter.
You
can adjust the following parameters for a SCENE
template:
SCENE1
1 Turn on the video monitor connected to this
unit.
2 Press and hold the desired
®SCENE
button
for 3 seconds.
The SCENE template customizing screen appears on
the video monitor.
• Rename the SCENE templates
• INPUT: The input source component.
• MODE: The active sound field programs,
"Straight" or "Pure Direct" mode.
Select the name of the SCENE template
at
step 3
of
"Creating your original SCENE templates" and
then press ®
ENTER.
4 Press the
®SCENE
button again to confirm
the edit.
.:-\r.<~
An asterisk mark (*) appears by the name
of
the original SCENE
template.
'illlf'~
.,,:!;'a~:,,~~
• Once the desired SCENE templates are assigned to the
corresponding
®SCENE
buttons, you need to set the input
source
of
the SCENE template on the remote control. See
page
41
for details.
•
You
can create a customized SCENE template for each SCENE
button, and if you create another customized SCENE template,
this unit overwrites the old customized SCENE template with
the new one.
• The newly created template
is
only available for the assigned
SCENE button.
t
o
Assign the SCENE
template to the
SCENE button
Create an original SCENE
template
Select the desired SCENE
template
~~
DVD
Vi~wing
~
•
INPUT:
DVD
t'10DE:
STRR
I
GHT
[ENTERl:Renaf'l~
[SCENE1l:SET
[RETURNl:
EXIT
SCENE1
RENRrlE
QVD
Vi~l"ing
[Al/[.l:Charact~r
[~l/[~l:Position
[ENTERl:SET
[RETURNl:CRNCEL
When the SCENE template you want to customize
is
not
assigned to any
of
the
®SCENE
buttons, press
®<J
II>
repeatedly to recall the desired SCENE template on the
menu screen.
• Press ®
11
/
'V
to select the desired character.
• Press
®<J
/
[>
to place an
"_"
(underscore) under the
space
or
the desired character.
• Press
@RETURN
to cancel the new name.
• Press
®ENTER to confirm the new name.
40 En