Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Features
- HDMI Information
- Supplied Accessories
- Parts & Controls
- Connections
- Getting Started
- Basic Operation
- Advanced Setup / Menu Operation
- Remote Control Operation
- Troubleshooting
- Glossary
- Specs
- Remote Control Codes
- Index
- Correction to Manual
- Front Panel Diagram
- Remote Control Diagram
- XM Channel Guide
- Warranty
Before perfonning the following operations, press @AMPon
the remote control.
Use
this feature
to
select
the
component
connected
to
the
MULTI
CH INPUT
jacks
(see
page
25)
as
the
input
source.
Rotate the
@INPUT
selector
to
select "MULTI
CH" (or press
~MULTI
CH
IN).
"MULTI
CH"
appears
in
the
front
panel
display.
~\.':.
Use "MULTI CH" menu
in
"INPUT MENU"
to
set
the
parameters for MULTI CH INPUT (see page 95).
Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks
is
selected as the input
source.
Playback
Use
this
feature
to
tum
the
front
speaker
system
(FRONT
A
and/or
FRONT
B)
on
or
off.
Press
@SPEAKERS
on the front panel
repeatedly to turn on or off the set of front
speakers connected to the FRONT A and/or
EXTRA SP speaker terminals.
The
active front
speaker
set
changes
as
follows.
L
FRONT A ) FRONT B J
FRONT A
OFF
f..(
__
and
FRONTB
• FRONT A and B or FRONT B setting
is
not available when
"EXTRA SP ASSIGN"
is
set
to
"PRESENCE", "ZONE 2" or
"NONE" (see page
85).
• Turn off the volume level
of
this unit when you switch the front
speaker setting.
• Using the Zone B feature
When
you
set
"EXTRA SP ASSIGN"
to
"ZONE
B" (see
page
85),
you
can
use
the
speakers
connected
to
the
EXTRA SP
speaker
terminals
in
another
room
(Zone
B).
Press
@SPEAKERS
on the front panel
repeatedly to turn on or off the Zone B speakers.
When
you
activate
the
Zone
B speakers, all
the
speakers
in
the
main
room
are
muted.
If you select
the
sound field program and activate the Zone B
speakers, Virtual CINEMA DSP activates automatically (see
page 51).
43
En
•