Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Features
- HDMI Information
- Supplied Accessories
- Parts & Controls
- Connections
- Getting Started
- Basic Operation
- Advanced Setup / Menu Operation
- Remote Control Operation
- Troubleshooting
- Glossary
- Specs
- Remote Control Codes
- Index
- Correction to Manual
- Front Panel Diagram
- Remote Control Diagram
- XM Channel Guide
- Warranty
Playback
.
'.'
;'
';:' . : ':: .-,"'1
'~";_
~.
,"'
",,-
';
,-.
:v.~
..
:'-~0:0->01-f-:~r___
: 'J'"
~'~"
lJ$/ngloPllieadptipilei·
,.:~""
~,';":-.
'
•.•
.:.._
.i:
.;;-:,k'HJv'-~s(,;
,>.
,~_~;~;_Ad;;'}?U
....
i.:
~.;
.{
Before performing the following operations, press
@AMP
on
the remote control.
Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
Video sources
Video sources
Audio sources
f------
Audio sources
XU
SIRIUS
c:::::::l
c:::::::l
Press the input selector buttons (@) on the
remote control to select a video source and then
an audio source.
You
can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
• When you connect headphones, no signals are output at the
speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.
:-,¥~
When you select a sound field program, SILENT CINEMA mode
activates automatically (see page 51).
Press
~
MUTE
on the remote control to mute the
audio output.
Press
~MUTE
again to resume the audio output.
~<i<-:.
•
You
can also rotate Q)VOLUME (or press@VOLUME
+/-)
to
resume the audio output.
•
You
can adjust the muting level by using the "MUTE TYPE"
parameter
in
"VOLUME MENU" (see page 89).
• The MUTE indicator flashes in the front panel display when the
audio output is muted and disappears from the front panel
display when the audio output
is
resumed.
~<i<-:.
•
You
can also select "MULTI CH"
as
the audio source (see
page 43). Press
@AMP
and then press @MULTI CH
IN.
• Set the "BGV" parameter in the "MULTI CH" menu
to
the
desired setting to select the default background video input
source
of
the MULTI CH INPUT sources (see page 95).
I
45 En