Owner's Manual

XM Satellite Radio tuning
Once you have installed the XM Mini-Tuner Dock,
inserted the XM Mini-Tuner, connected the XM Dock to
your XM Ready® home audio system, and installed the
antenna, you are ready to subscribe and begin receiving
XM programming. There are three places to find your
eight character XM Radio 10: On the XM Mini-Tuner, on
the XM Mini-Tuner package, and on XM Channel
O.
Record the XM Radio 10 in the following eight squares
for reference.
DDDDDDDD
1 Rotate the@INPUT selector (or press
@XM) to select "XM" as the input source.
The cursor on the left of the XM indicator lights up in
the front panel display and the XM Satellite Radio
information (such as channel number, channel name,
category, artist name,
or song title) for the currently
selected channel appears in the front panel display.
Lights up
I
IIJl.TlCll VCfIl DII" V-NJX OT\l,c1l DYD liIDtCO-fII CD
." r~~ SUM
The XM Radio ID does not use the letters "I", "0", "S" or "P'.
Activate your XM Satellite Radio service in the U.S. online at
http://activate.xmradio.com/or call 1-800-XM-RADIO (1-800-
967-2346). Activate your XM Satellite Radio service
in Canada
online at https:llactivate.xmradio.ca/or call1-877-GET-XMSR
(1-877-438-9677).
You will need a major credit card. XM will
send a signal from the satellites to activate the full channel lineup.
Activation normally takes 10 to
15 minutes, but during peak busy
periods you may need to keep your XM Ready home audio
system on for up to an hour. When you can access the full lineup
on your XM Ready home audio system you are done.
O~J 1 F'r·€o
l
.... i €ol.,.'
,I,
~"'~
When you select "XM" as the input source, this unit
automatically recalls the previously selected channel.
• The XM Satellite Radio signals cannot
be output at the
AUDIO
OUT (REC) jacks.
• If a status message or an error message appears
in the front
panel display
or in the OSD, see the "XM Satellite Radio"
section
in "Troubleshooting" on page I 10 for appropriate
remedies.
2 Search for a channel by using one of the XM
Satellite Radio search modes.
• To select a channel from the all channel list, see
"All Channel Search mode" on page 59.
•
To select a channel by category, see "Category
Search mode" on page 59.
• To select a channel from the preset channels, see
"Preset Search mode" on page 59.
•
To select the desired channel directly by entering
the channel number, see "Direct number access
mode" on page 59.
58 En
~'./-:.
• You can use the Neural Surround decoder to enjoy the XM HD
surround sound content
of the XM Satellite Radio broadcasts in
multi-channels (see page 78).
•
You can set the XM Satellite Radio preset channels (see
page 60).
•
You can display the XM Satellite Radio information in the front
panel display or
in the OSD (see page 61).