Owner's Manual
Table Of Contents
- Quick Reference Guide
- Owners Manual
- INTRODUCTION
- CONNECTIONS
- Connecting speakers
- Connecting external components
- Cable plugs and jacks
- Connecting a TV monitor
- Connecting BD/DVD players and other devices
- Connecting game consoles
- Connecting a multi-format player or an external decoder
- Connecting an external amplifier
- Connecting a SCENE link playback-compatible device
- Using the Trigger function to link external component power
- Connecting audio/video recording devices
- Connecting the FM/AM antennas
- Setting up the speaker parameters automatically (YPAO)
- PLAYBACK
- Basic playback procedure
- Changing input settings with a single key (SCENE function)
- Enjoying the desired sound field effect
- Configuring the settings of this unit while viewing the TV screen
- Configuring settings specific to an individual input source (OPTION menu)
- Confirming and operating input sources from the Content window
- FM/AM tuning
- Listening to Satellite Radio
- Connecting the SiriusConnect™ tuner
- Activating SIRIUS Satellite Radio™ subscription
- SIRIUS Satellite Radio™ operations
- Registering and recalling the SIRIUS Satellite Radio™ channels
- Displaying the SIRIUS Satellite Radio™ information
- Confirming and operating Sirius Satellite Radio™ from the Content window
- Playing back tunes from your iPod™/iPhone™
- Playing back tunes from Bluetooth™ components
- SETUP
- Configuring input sources (Input menu)
- Editing the SCENE function (SCENE menu)
- Setting sound program parameters (Sound Program menu)
- Setting various functions (Setup menu)
- Confirming information of this unit (Information menu)
- Controlling other components with the remote control
- Extended functionality that can be configured as needed (Advanced Setup menu)
- Displaying/Setting the Advanced Setup menu
- Setting the impedance of speakers
- Avoiding crossing remote control signals when using multiple Yamaha receivers
- Resetting the SIRIUS Satellite Radio™ parental lock code
- Changing TV format
- Removing HDMI video output up-scaling limits
- Initializing various settings for this unit
- Using the HDMI Control function
- Using multi-zone configuration
- APPENDIX
- List of Remote Control Codes
- Safety Brochure
- Scan of CD-ROM
- Warranty
SETUP
En 105
This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reproduce separate input sources in the main zone and the second zone (Zone2). You can
control this unit from the second zone using the supplied remote control.
Connecting Zone2
You need the following additional equipment to use the multi-zone functions of this unit:
• An infrared signal receiver in the second zone.
• An infrared signal emitter in the main zone. This emitter transmits infrared signals from the remote control
to a CD player or a DVD player, etc. in the main zone via the infrared signal receiver in the second zone.
• An amplifier and speakers in the second zone.
■
Using the external amplifier
An amplifier located in the secondary zone can be connected to this unit as shown below.
■
Using the internal amplifier of this unit
Connect the speakers in the second zone to the EXTRA SP jacks directly (☞p. 18).
■
Using REMOTE IN/OUT jacks for multi-zone components
This unit is equipped with REMOTE IN and REMOTE OUT jacks. You can use these jacks to control
this unit and other components from Zone2 (☞
p. 30).
Using multi-zone configuration
Only analog signal can be sent to Zone2. If you want to output sound from Zone2, connect an
external component to AV5-6, AUDIO1-2, or VIDEO AUX by analog connection. For example, if
you want to output sound from an HDMI DVD player in Zone2, you must connect the component to
this unit by both HDMI and analog connections.
Since there are many possible ways to connect and use this unit in a multi-zone configuration, we
recommend that you consult with your nearest authorized Yamaha dealer or service center about the
Zone2 connections that best meet your requirements.
To the REMOTE IN jack
Infrared signal
emitter
DVD player (etc.)
Amplifier
Remote control
Second zone
(Zone2)
This unit
From the ZONE2 OUT jacks
Infrared signal
receiver
From the REMOTE OUT jack
Main zone
To avoid unexpected noise, DO NOT USE the Zone2 feature with CDs encoded in DTS.
Some Yamaha models can be directly connected to the REMOTE jacks of this unit. These models
may not require an infrared signal emitter. Up to 6 Yamaha components can be connected as shown
below.
ZONE2
OUT
HDMI 3
HDMI 4
H
DMI
5
C
ENTE
R
SU
RR
OU
N
D
SU
RR
OU
N
D
B
A
C
K
/
BI-AMP
S
IN
G
LE
E
XTRA
S
P
ZO
NE2
/
P
RE
S
EN
CE
FR
O
NT
W
OOFE
R
N
TER
A
U
DI
O
OU
T
S
URROUN
D
S
UR.BACK
PRE OUT
SUBWOOFE
R
1
2
FRONT
C
ENTE
R
S
IN
G
L
E
S
PEAKER
S
AUDIO
R
L
R
L
Amplifier
Second Zone
(Zone2)
Audio input
REMOTE
IN
Infrared signal
receiver
This unit Yamaha
component
REMOTE
OUT IN
REMOTE
OUT