Owner's Manual
Table Of Contents
- Quick Reference Guide
- Owners Manual
- INTRODUCTION
- CONNECTIONS
- Connecting speakers
- Connecting external components
- Cable plugs and jacks
- Connecting a TV monitor
- Connecting BD/DVD players and other devices
- Connecting game consoles
- Connecting a multi-format player or an external decoder
- Connecting an external amplifier
- Connecting a SCENE link playback-compatible device
- Using the Trigger function to link external component power
- Connecting audio/video recording devices
- Connecting the FM/AM antennas
- Setting up the speaker parameters automatically (YPAO)
- PLAYBACK
- Basic playback procedure
- Changing input settings with a single key (SCENE function)
- Enjoying the desired sound field effect
- Configuring the settings of this unit while viewing the TV screen
- Configuring settings specific to an individual input source (OPTION menu)
- Confirming and operating input sources from the Content window
- FM/AM tuning
- Listening to Satellite Radio
- Connecting the SiriusConnect™ tuner
- Activating SIRIUS Satellite Radio™ subscription
- SIRIUS Satellite Radio™ operations
- Registering and recalling the SIRIUS Satellite Radio™ channels
- Displaying the SIRIUS Satellite Radio™ information
- Confirming and operating Sirius Satellite Radio™ from the Content window
- Playing back tunes from your iPod™/iPhone™
- Playing back tunes from Bluetooth™ components
- SETUP
- Configuring input sources (Input menu)
- Editing the SCENE function (SCENE menu)
- Setting sound program parameters (Sound Program menu)
- Setting various functions (Setup menu)
- Confirming information of this unit (Information menu)
- Controlling other components with the remote control
- Extended functionality that can be configured as needed (Advanced Setup menu)
- Displaying/Setting the Advanced Setup menu
- Setting the impedance of speakers
- Avoiding crossing remote control signals when using multiple Yamaha receivers
- Resetting the SIRIUS Satellite Radio™ parental lock code
- Changing TV format
- Removing HDMI video output up-scaling limits
- Initializing various settings for this unit
- Using the HDMI Control function
- Using multi-zone configuration
- APPENDIX
- List of Remote Control Codes
- Safety Brochure
- Scan of CD-ROM
- Warranty
CONNECTIONS
Connecting speakers
En 19
3
Check that “SP IMP.” is displayed on the front panel.
4
Press STRAIGHT repeatedly to select a “6ΩMIN.”
5
Switch this unit to the standby mode, and then
switch it on again.
The power turns on, when the settings you made has been
configured.
■
Connecting speakers
This type of jack can connect to the following speakers or
connection.
1
Remove approximately 0.4 in. (10 mm) of insulation
from the ends of the speaker cables, and twist the
bare wires of the cables together firmly so that they
will not cause short circuits.
2
Loosen the speaker terminals.
3
Insert the bare wire of the speaker cable into the gap
on the side of the terminal.
4
Tighten the terminal.
SPIMP.-8MIN
• Front L/R speakers
• Center speaker
• Surround L/R speakers
• Surround back L/R speakers
• Bi-amp connection (Front speaker L/R speakers)
FRONT
2
2
3
1
4
4
Connecting the banana plug
Tighten the knob, and then insert the banana plug into the end of
the terminal.
FRONT
Banana plug