Owner's Manual
Table Of Contents
- Quick Reference Guide
- Owners Manual
- INTRODUCTION
- CONNECTIONS
- Connecting speakers
- Connecting external components
- Cable plugs and jacks
- Connecting a TV monitor
- Connecting BD/DVD players and other devices
- Connecting game consoles
- Connecting a multi-format player or an external decoder
- Connecting an external amplifier
- Connecting a SCENE link playback-compatible device
- Using the Trigger function to link external component power
- Connecting audio/video recording devices
- Connecting the FM/AM antennas
- Setting up the speaker parameters automatically (YPAO)
- PLAYBACK
- Basic playback procedure
- Changing input settings with a single key (SCENE function)
- Enjoying the desired sound field effect
- Configuring the settings of this unit while viewing the TV screen
- Configuring settings specific to an individual input source (OPTION menu)
- Confirming and operating input sources from the Content window
- FM/AM tuning
- Listening to Satellite Radio
- Connecting the SiriusConnect™ tuner
- Activating SIRIUS Satellite Radio™ subscription
- SIRIUS Satellite Radio™ operations
- Registering and recalling the SIRIUS Satellite Radio™ channels
- Displaying the SIRIUS Satellite Radio™ information
- Confirming and operating Sirius Satellite Radio™ from the Content window
- Playing back tunes from your iPod™/iPhone™
- Playing back tunes from Bluetooth™ components
- SETUP
- Configuring input sources (Input menu)
- Editing the SCENE function (SCENE menu)
- Setting sound program parameters (Sound Program menu)
- Setting various functions (Setup menu)
- Confirming information of this unit (Information menu)
- Controlling other components with the remote control
- Extended functionality that can be configured as needed (Advanced Setup menu)
- Displaying/Setting the Advanced Setup menu
- Setting the impedance of speakers
- Avoiding crossing remote control signals when using multiple Yamaha receivers
- Resetting the SIRIUS Satellite Radio™ parental lock code
- Changing TV format
- Removing HDMI video output up-scaling limits
- Initializing various settings for this unit
- Using the HDMI Control function
- Using multi-zone configuration
- APPENDIX
- List of Remote Control Codes
- Safety Brochure
- Scan of CD-ROM
- Warranty
CONNECTIONS
Connecting speakers
En 20
■
Connecting extra speakers
The EXTRA SP jacks can connect to the following speakers.
1
Press down the tab and insert the bare end of the
speaker cable into the hole in the terminal.
2
Release the tab to secure the wire.
■
Connecting the subwoofer
1
Connect the subwoofer input jack to the
SUBWOOFER 1 or 2 jack on this unit with an audio
pin cable.
2
Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
• Presence L/R speakers
• Zone2 speakers
E
X
ZO
PR
Red: positive (+)
Black: negative (–)
NOTE
After connection, applying this setting to this unit is required to
activate all speaker connections. With using “Power Amp
Assign” function, you can easily apply the speaker
configuration.
Refer to “Power Amp Assign” (☞
p. 84) for details on using
“Power Amp Assign” function.
VOLUME
MIN MAX
CROSSOVER/
HIGH CUT
MIN MAX
Subwoofer examples