Owner`s manual

8-9
CD-04E
1. Loosen the carburetor clamps and remove all hoses
and cables, and then remove the carburetor.
2. Pinch the fuel hose to prevent fuel flowing.
3. Remove the float chamber and install the proper
main jet.
4. Assemble by reversing the removal steps.
WARNING
@
Make sure that all hoses and clamps are properly
installed.
@
Standard main jet:
# 135
Main jet
1
Mixture Condition
Small No. Lean
Warm weather
High altitude
Large No. Rich
Cold weather
Low altitude
U8FU10.book Page 9 Thursday, April 8, 2004 6:27 PM