Operation Manual

The pattern beat/clock position indicators appear in the upper right area of

the LCD, where large inverted triangles represent each beat in the measure,

and small inverted triangles represent each clock where rhythm data may

exist. (The number of beat and clock position triangles in the measure

depends on the designated meter of the pattern.)

During playback, each beat position indicator flashes according to the

current beat location, with all beat positions flashing on the first beat of the

measure. Each clock position indicator flashes according to the current

clock location.

SELECTING A PATTERN

- Position the flashing cursor over the word “PTN”,

then press [+1] and [-1] to select a Preset (#000 ~ #199) or User (#200 ~

#249) pattern.

STARTING AND STOPPING THE PATTERN PLAYBACK

Press [PLAY] to start

the pattern playback. Press [STOP] to stop the pattern playback. Pressing

[PLAY] again will continue the pattern playback from the stop position.

DESIGNATING THE TOP OF THE PATTERN

- When the playback is stopped,

press [TOP], [BWD] or [FWD] to designate the top of the measure. Then,

pressing [PLAY] will start the pattern playback from the top.