Operation Manual

ASSIGNING DRUM VOlCES TO THE PADS -

You can assign any of the 128

AWM drum voices to the pads in a User drum kit. Hold [MODE] and press

[PAGE+] or [PAGE-] to access the voice Assign function. The word “ASSIGN”

will display in the lower left area of the LCD, and the name of the drum voice

which is assigned to the currently selected pad will be flashing. Press any

drum pad (within either the Drum or Percussion Pad Bank)- the name of the

drum voice assigned to the pad you select will appear in the LCD. Press [-1]

and [+1] to select one of the 128 drum voices and assign it to the pad. (As

you step through each drum voice, you can hit the pad in order to hear how

the voice sounds.) After you’ve assigned a drum voice to the first pad, simply

select a different pad and repeat the procedure until you have created your

own User drum kit.

Each of the 24 pads in the Drum and Percussion Pad Banks has a specific

pad number assigned to it, between 0 ~ 23, as shown below.