Operation Manual

ASSIGNING THE HARMONY VOICE TRANSMIT CHANNEL - The RY8 can
transmit MIDI signals generated by the Harmony voice (see “HARM 1, 2, 3”,
page 63) in order to play an external tone generator. To do so, you must
assign the RY8’s Harmony voice channel to the same MIDI receive channel
number as the tone generator. Hold [MODE] and press [PAGE+] once or more
to access the Harmony Channel function. The abbreviation “HRM CH”
(Harmony Channel) will appear in the lower left area of the LCD, along with
the current channel assignment (“01 ~ 16”, “OFF”). Press [-1] and [+1] to
assign the RY8’s Harmony voice channel number.
Some MIDI keyboards and synthesizers have built·in sequencers, as well as floppy disk drives which can
send and receive bulk data, program change messages, etc. Consult the owner’s manual of your
keyboard or synthesizer to determine the extent of its MIDI capabilities.
The pitch bend range for the External In voice and Harmony voice is 12 (± one octave). Assign the same
setting for the pitch bend range of the external device.
70