User Manual

Menu: [File] menu
S90 XS/S70 XS Editor VST Owner’s Manual
42
5 Auto Sync Setting
This section lets you set how the data synchronization between the S90 XS/S70 XS Editor VST and the
S90 XS/S70 XS instrument is executed when “OFFLINE” is changed to “ONLINE.” Actual data
synchronization is executed from the Auto Sync window (page 54) called up automatically under certain
circumstances such as clicking the [OFFLINE] button, starting the S90 XS/S70 XS Editor VST and
opening a new file on the Editor.
Global
Determines whether or not the Global data (see page 3) is synchronized and which data (S90 XS/S70 XS
Editor VST or S90 XS/S70 XS itself) is synchronized with the other.
Current
Determines whether or not the Current data (see page 3) is synchronized and which data (S90 XS/S70
XS Editor VST or S90 XS/S70 XS itself) is synchronized with the other.
Voice
Determines whether or not the Voice data (see page 3) is synchronized and which data (S90 XS/S70 XS
Editor VST or S90 XS/S70 XS itself) is synchronized with the other.
Auto Start
When this is set to “On” and one of the following operations is executed, data synchronization will be
started automatically as soon as the Auto Sync window is opened.
• When clicking “OFFLINE” after setting the MIDI IN/OUT parameter correctly in the Utility mode on the
S90 XS/S70 XS, setting the MIDI Ports correctly on the computer, and making a proper connection.
• When the connection between the S90 XS/S70 XS and a computer are corrected after appropriately
correcting the setup of the S90 XS/S70 XS and the computer.
• When the settings on the S90 XS/S70 XS instrument and the computer are corrected after
appropriately reconnecting the devices.
• When the settings on the S90 XS/S70 XS instrument and the computer are corrected after
appropriately launching the S90 XS/S70 XS Editor VST.
n The parameters set here apply also to the parameters having the same names in the Auto Sync window.
CAUTION
When the Auto Start parameter is set to “On,” data synchronization is started automatically under certain circumstances
(page 54) such as clicking the [OFFLINE] button, starting the Editor and opening a new file on the Editor. Keep in mind that
this will cause unexpected data loss on the S90 XS/S70 XS Editor VST or the S90 XS/S70 XS itself, since new data
automatically overwrites old data upon data synchronization. Make sure to save your important data before using the S90
XS/S70 XS Editor VST.
6 Knob Guide
Determines whether or not the Knob Guide (knob editing area) appears when adjusting a knob. Setting
this to On conveniently enlarges the knob editing area (as shown), making it much easier to edit a knob’s
parameter.
Knob Guide: On Knob Guide: Off