Speaker System Owner's Manual

ManualsBrandsYamaha ManualsSpeaker SystemS12e

SPEAKER SYSTEMS

S10e/S12e/S15e

S12Me

Owner’s Manual

Mode d’emploi

Bedienungsanleitung

Manual de instrucciónes

Thank you for purchasing a YAMAHA product. To obtain

maximum performance from your YAMAHA speaker system

and ensure many years of trouble-free operation, we recommend

that you read this Owner’s Manual thoroughly before use.

Contents

Precautions ...................................................................... 2

Connecting the Speakers ................................................ 3

Specifications ................................................................... 4

Summary of content (4 pages)

PAGE 1
SPEAKER SYSTEMS S10e/S12e/S15e S12Me Owner’s Manual Mode d’emploi Bedienungsanleitung Manual de instrucciónes Thank you for purchasing a YAMAHA product. To obtain maximum performance from your YAMAHA speaker system and ensure many years of trouble-free operation, we recommend that you read this Owner’s Manual thoroughly before use. Contents Precautions ...................................................................... 2 Connecting the Speakers ................................................
PAGE 2
Precautions AVOID EXCESSIVE HEAT, HUMIDITY, DUST AND VIBRATION To protect your speakers When choosing a location for your speakers, avoid the following: When choosing a power amplifier to use with your speakers, make sure that its power output matches the • Direct sunlight, high temperatures (such as near heaters), or excessively low temperatures. speakers’ power capacity (refer to the Specifications on page 4).
PAGE 3
• Remove the speakers from the stands before moving the stands or adjusting their height. CAUTION! For the four models, S10e, S12e, S15e and S12Me, use the TS-30, TS-40, TS-80, or TS-90 speaker stand by Ultimate Support System, Inc. sold separately. When using speaker stands, observe the following precautions to prevent the speaker stands from falling over or the speaker system being dropped. • Use the speaker stands with their legs fully opened.
PAGE 4
PHONE PLUG WIRING The standard input terminals for this unit are 1/4" phone jacks. Connect the speaker leads as shown in this diagram. Caution: Use only unshielded speaker cable with stranded conductors to connect speakers to the speaker terminals on a power amplifier. The use of audio cable not rated as sufficient for the amplifier’s maximum output level can create a potential fire hazard.