Operation Manual

S90 XS/S70 XS Remote Editor Windows: Edit window

S90 XS/S70 XS Remote Editor Owner’s Manual

)-2 CC (Control Change) section

Assigns the function to the Function Assignment box selected in the 9 Edit section. The setting

here is available when the Remote/CC button is set to "CC." Clicking "CC" at the left of this section

also sets the Remote/CC button of the Edit section to "CC."

• CC Number (Control Change Number)

Determines the Control Change number. Selects the Control Change number by clicking one of

the scroll buttons at the right of this box. You can also input the Control Change number directly.

• Display Name

Selects the Knob/Slider’s function name which is to be shown on the display of the S90 XS/S70 XS

when the Remote/CC button of 9 Edit section is set to "CC." Click the triangular button at the right

of this box, then select the desired one. You can also input the name directly.

• Display Format

Sets the value format shown on the display of the S90 XS/S70 XS to "0 – 127" or "-64 – +63."

! Detail button

Clicking this button closes the Controller Settings section. Click this again to open the Controller Settings

section.

When closing the Controller Settings section