User Manual
Table Of Contents
- Welcome
- Accessories
- About the accessory disk
- S90 XS/S70 XS Main Features
- About this Manual
- Contents
- Controls and Functions
- Setting Up
- Start Guide
- Modes
- Basic Instructions
- Playing the Keyboard in the Voice mode
- Creating a New Performance by Using Your Favorite Voice (Performance Creator)
- Playing the Keyboard in the Performance Mode
- Singing with a Connected Microphone
- Recording/Playing Back with a USB Storage Device (Audio Record/Play Mode)
- Using a Connected Computer
- Playing the Keyboard Along with Playback of the MIDI File
- Using as a Master Keyboard (Master Mode)
- Making Global System Settings (Utility Mode)
- Saving/Loading Data (File Mode)
- Appendix
- Display Messages
- Troubleshooting
- No Sound
- No sound from the MIC INPUT jack
- Split does not work via the external MIDI device
- Playback continues without stopping
- The sound is distorted
- Sound is cut off
- Only one note sounds at a time
- Wrong pitch or unexpected pitch
- No effect is applied
- Vocoder does not work when selecting a Vocoder Voice
- The Edit Indicator appears, even when parameters are not being edited
- Cannot start the Arpeggio
- Cannot stop the Arpeggio
- The Voice assigned to the Performance produces a different sound from the one in the Voice mode
- Data communication between the computer and the S90 XS/S70 XS does not work properly
- The S90 XS/S70 XS does not sound properly even when playing back the song data on the computer or the MIDI instrument connected to the S90 XS/S70 XS
- MIDI bulk data transmission/reception does not work properly
- Cannot save data to the external USB storage device
- Cannot play an audio file
- Cannot enter the Edit mode
- Specifications
- Index
S90 XS/S70 XS Owner’s Manual
27
Playing the Keyboard in the Voice mode
6 After finding the favorite pattern, press the
[STORE] button to store the setting as a User
Voice.
Copying the Arpeggio Type to another
Arpeggio part
Follow the instruction to copy the Arpeggio Type
assigned to the Arp 1 to the Arp 2 – 5.
1 Select “ARP SELECT” by pressing the
Arpeggio/Effect Function button.
2 Press the Function [1] button.
3 Press one of the Function [2] – [5] buttons
while holding down the [STORE] button.
Changing the Arpeggio type
To change the Arpeggio from five types, use the
Arpeggio/Effect Function button and Function button.
1 Press the [ARP ON/OFF] button on the panel
to turn the Arpeggio on.
2 Select “ARP SELECT” by pressing the
Arpeggio/Effect Function button.
3 Change the Arpeggio type by using the
Function button.
Arpeggio/Effect Function button
Function button