User Manual
Table Of Contents
- Welcome
- Accessories
- About the accessory disk
- S90 XS/S70 XS Main Features
- About this Manual
- Contents
- Controls and Functions
- Setting Up
- Start Guide
- Modes
- Basic Instructions
- Playing the Keyboard in the Voice mode
- Creating a New Performance by Using Your Favorite Voice (Performance Creator)
- Playing the Keyboard in the Performance Mode
- Singing with a Connected Microphone
- Recording/Playing Back with a USB Storage Device (Audio Record/Play Mode)
- Using a Connected Computer
- Playing the Keyboard Along with Playback of the MIDI File
- Using as a Master Keyboard (Master Mode)
- Making Global System Settings (Utility Mode)
- Saving/Loading Data (File Mode)
- Appendix
- Display Messages
- Troubleshooting
- No Sound
- No sound from the MIC INPUT jack
- Split does not work via the external MIDI device
- Playback continues without stopping
- The sound is distorted
- Sound is cut off
- Only one note sounds at a time
- Wrong pitch or unexpected pitch
- No effect is applied
- Vocoder does not work when selecting a Vocoder Voice
- The Edit Indicator appears, even when parameters are not being edited
- Cannot start the Arpeggio
- Cannot stop the Arpeggio
- The Voice assigned to the Performance produces a different sound from the one in the Voice mode
- Data communication between the computer and the S90 XS/S70 XS does not work properly
- The S90 XS/S70 XS does not sound properly even when playing back the song data on the computer or the MIDI instrument connected to the S90 XS/S70 XS
- MIDI bulk data transmission/reception does not work properly
- Cannot save data to the external USB storage device
- Cannot play an audio file
- Cannot enter the Edit mode
- Specifications
- Index
S90 XS/S70 XS Owner’s Manual
30
Creating a New Performance by Using Your Favorite Voice (Performance Creator)
Drum Assign—Layering a
drum Part with the current
Voice
This section explains how to create a Performance in
which you can trigger a drum pattern (via the Arpeggio
function) in addition to the current Voice.
1 Select a Voice in the Voice mode.
2 Press the [DRUM ASSIGN] button on the front
panel.
The Drum Assign display appears. The Dr/Pc (Drum/
Percussion) is automatically assigned to the Category. The
Drum Voice is assigned to Part 4 then the Arpeggio is
automatically turned on. Play the keyboard to trigger the
Arpeggio.
3 Press the Cursor [R] button.
The Voice list is shown.
4 Select the desired Drum Voice from the list,
then press the [ENTER] button.
The Performance Play display will appear.
Changing the drum pattern
(Arpeggio Type)
Executing the Drum Assign function will assign the Drum
Voice to Part 4 and set the Arpeggio of Part 4 to on. If you
want to change the drum pattern, select a different
Arpeggio Type in the Performance Part Edit.
5 Press the [EDIT] button in the Performance
Play display.
The Performance Edit Select display appears.
6 Select Part 4 by using the cursor buttons
then press the [ENTER] button.
7 Select “Arpeggio” by using the cursor
buttons then press the [ENTER] button.
8 Select “Arp 1 Type” by using the cursor
buttons then press the [ENTER] button.