User Manual
Table Of Contents
- Welcome
- Accessories
- About the accessory disk
- S90 XS/S70 XS Main Features
- About this Manual
- Contents
- Controls and Functions
- Setting Up
- Start Guide
- Modes
- Basic Instructions
- Playing the Keyboard in the Voice mode
- Creating a New Performance by Using Your Favorite Voice (Performance Creator)
- Playing the Keyboard in the Performance Mode
- Singing with a Connected Microphone
- Recording/Playing Back with a USB Storage Device (Audio Record/Play Mode)
- Using a Connected Computer
- Playing the Keyboard Along with Playback of the MIDI File
- Using as a Master Keyboard (Master Mode)
- Making Global System Settings (Utility Mode)
- Saving/Loading Data (File Mode)
- Appendix
- Display Messages
- Troubleshooting
- No Sound
- No sound from the MIC INPUT jack
- Split does not work via the external MIDI device
- Playback continues without stopping
- The sound is distorted
- Sound is cut off
- Only one note sounds at a time
- Wrong pitch or unexpected pitch
- No effect is applied
- Vocoder does not work when selecting a Vocoder Voice
- The Edit Indicator appears, even when parameters are not being edited
- Cannot start the Arpeggio
- Cannot stop the Arpeggio
- The Voice assigned to the Performance produces a different sound from the one in the Voice mode
- Data communication between the computer and the S90 XS/S70 XS does not work properly
- The S90 XS/S70 XS does not sound properly even when playing back the song data on the computer or the MIDI instrument connected to the S90 XS/S70 XS
- MIDI bulk data transmission/reception does not work properly
- Cannot save data to the external USB storage device
- Cannot play an audio file
- Cannot enter the Edit mode
- Specifications
- Index
S90 XS/S70 XS Owner’s Manual
32
Selecting a Performance
Selecting a Performance is done in basically the same way as selecting a Voice. The Category Search function is
available also in the Performance Play mode. Note that the S90 XS/S70 XS has no Preset Performances and provides
only three User Banks.
Changing the timbre of the Voice
Just as in the Voice mode, the sound of the Performance (consisting of a maximum of four Parts or Voices) can be edited
via the Knobs and Sliders in the Performance mode. There are two ways to edit the Performance: editing the entire
Performance, and editing only one specific Part (Voice) assigned to the Performance. The Part to be edited is selected
via the Performance Control buttons. To edit the entire Performance, press the [COMMON] button then turn the Knob. To
edit a specific Voice of the current Performance, select the desired Part by using the [PART SELECT] buttons then turn
the Knob.
NOTE Hold the [SHIFT] button and press the [COMMON]/[PART SELECT] button to call up the Common Edit Select display/Part Edit Select display. This
is useful for editing the Performance.
The far left four Sliders adjust the Volume, Pan, Chorus Send and Reverb Send for each of the four Parts. Select the
function via the Slider Function button, then move the Sliders.
Playing the Keyboard in the Performance Mode
Press to edit the entire
Performance
Press to select
a Part
Select a function via the
Slider Function button