User Manual
Table Of Contents
- Welcome
- Accessories
- About the accessory disk
- S90 XS/S70 XS Main Features
- About this Manual
- Contents
- Controls and Functions
- Setting Up
- Start Guide
- Modes
- Basic Instructions
- Playing the Keyboard in the Voice mode
- Creating a New Performance by Using Your Favorite Voice (Performance Creator)
- Playing the Keyboard in the Performance Mode
- Singing with a Connected Microphone
- Recording/Playing Back with a USB Storage Device (Audio Record/Play Mode)
- Using a Connected Computer
- Playing the Keyboard Along with Playback of the MIDI File
- Using as a Master Keyboard (Master Mode)
- Making Global System Settings (Utility Mode)
- Saving/Loading Data (File Mode)
- Appendix
- Display Messages
- Troubleshooting
- No Sound
- No sound from the MIC INPUT jack
- Split does not work via the external MIDI device
- Playback continues without stopping
- The sound is distorted
- Sound is cut off
- Only one note sounds at a time
- Wrong pitch or unexpected pitch
- No effect is applied
- Vocoder does not work when selecting a Vocoder Voice
- The Edit Indicator appears, even when parameters are not being edited
- Cannot start the Arpeggio
- Cannot stop the Arpeggio
- The Voice assigned to the Performance produces a different sound from the one in the Voice mode
- Data communication between the computer and the S90 XS/S70 XS does not work properly
- The S90 XS/S70 XS does not sound properly even when playing back the song data on the computer or the MIDI instrument connected to the S90 XS/S70 XS
- MIDI bulk data transmission/reception does not work properly
- Cannot save data to the external USB storage device
- Cannot play an audio file
- Cannot enter the Edit mode
- Specifications
- Index
S90 XS/S70 XS Owner’s Manual
45
In the Utility mode, you can set parameters that apply to the entire system of this instrument. To enter the Utility mode,
press the [UTILITY] button. Pressing the [EXIT] button returns to the original display.
This section describes some useful functions in the Utility mode.
Setting the default mode when turning
the power on
General Power on Mode
From the Voice, Performance, Multi and Master, the mode
specified here is called up when turning the power on.
Reversing the LCD status
General LCD Mode
This parameter determines the LCD status.
Click (metronome) settings
General Click Sw – OutputSel
Determines the tempo, volume and output destination of
the click (metronome).
Micro Tuning
MicroTune
Tunes the individual notes of the keyboard.
Effect settings applied to the signal
input from the MIC INPUT jack
Voice A/D FX
Determines the Effect settings and Vocoder settings
applied to the signal input from the MIC INPUT jack in the
Voice Mode.
NOTE For details on how to apply the Insertion Effect, refer to page 24.
Master Effect/Master EQ settings in the
Voice mode
Voice Master FX, Master EQ
Determines how much of the Effect and EQ processing is
applied to the master output.
Making Global System Settings (Utility Mode)
When “normal” is selected:
When “reverse” is selected: