User Manual
Table Of Contents
- Welcome
- Accessories
- About the accessory disk
- S90 XS/S70 XS Main Features
- About this Manual
- Contents
- Controls and Functions
- Setting Up
- Start Guide
- Modes
- Basic Instructions
- Playing the Keyboard in the Voice mode
- Creating a New Performance by Using Your Favorite Voice (Performance Creator)
- Playing the Keyboard in the Performance Mode
- Singing with a Connected Microphone
- Recording/Playing Back with a USB Storage Device (Audio Record/Play Mode)
- Using a Connected Computer
- Playing the Keyboard Along with Playback of the MIDI File
- Using as a Master Keyboard (Master Mode)
- Making Global System Settings (Utility Mode)
- Saving/Loading Data (File Mode)
- Appendix
- Display Messages
- Troubleshooting
- No Sound
- No sound from the MIC INPUT jack
- Split does not work via the external MIDI device
- Playback continues without stopping
- The sound is distorted
- Sound is cut off
- Only one note sounds at a time
- Wrong pitch or unexpected pitch
- No effect is applied
- Vocoder does not work when selecting a Vocoder Voice
- The Edit Indicator appears, even when parameters are not being edited
- Cannot start the Arpeggio
- Cannot stop the Arpeggio
- The Voice assigned to the Performance produces a different sound from the one in the Voice mode
- Data communication between the computer and the S90 XS/S70 XS does not work properly
- The S90 XS/S70 XS does not sound properly even when playing back the song data on the computer or the MIDI instrument connected to the S90 XS/S70 XS
- MIDI bulk data transmission/reception does not work properly
- Cannot save data to the external USB storage device
- Cannot play an audio file
- Cannot enter the Edit mode
- Specifications
- Index
S90 XS/S70 XS Owner’s Manual
53
Troubleshooting
Are the parameter settings such as Element Switch, Part Switch, Note Limit and Velocity Limit appropriate?
When the Performance/Multi produces no sound, has a Voice been assigned to each Part?
When the Performance/Multi produces no sound, is the output setting of each Part set appropriately?
When the Multi produces no sound, are the output port/channel of each track in the external sequencer and
the receive channel of each Part in the Multi set appropriately?
When the Performance/Multi produces no sound, is the “Arpeggio Play Only” parameter of each Part turned
on?
No sound from the MIC INPUT jack
Is the microphone switch turned on?
Is the cable between the microphone and the synthesizer properly connected?
Is the [MIC ON/OFF] button set to on (lamp is lit)?
Is the INPUT GAIN knob turned fully counter-clockwise (to the minimum)?
Are the volume settings of the A/D Input Part too low?
Are the effect settings appropriate?
Is the output setting of the A/D Input Part set appropriately?
Split does not work via the external MIDI device
The settings of the “Split Sw” parameter and “Split Lower/Upper” parameter in the Performance mode work
only when playing the keyboard of the instrument itself.
[VOICE] [EDIT] [MUTE] (lighting) Number [9] – [16] buttons
[PERFORM] [PART ON/OFF]
[PERFORM] [EDIT] Part selection Play Mode Note Limit Lo/Hi
[PERFORM] [EDIT] Part selection Play Mode Velocity Limit Lo/Hi
[PERFORM] [EDIT] Part selection Voice
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Part selection Voice
[PERFORM] [EDIT] Part selection Play Mode Output Select
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Part selection Play Mode Output Select
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Part selection Voice Receive Ch
[PERFORM] [EDIT] Part selection Voice Arp Play Only
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Part selection Voice Arp Play Only
Selecting “MIC” via the Knob Function button VOLUME knob
[UTILITY] Voice A/D FX
[PERFORM] [EDIT] Common A/D FX
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Common A/D FX
[UTILITY] Voice A/D Out Output Select
[PERFORM] [EDIT] Common A/D Out Output Select
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Common A/D Out Output Select