Gebruikershandleiding NL
SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
Explanation of Graphical Symbols CAUTION The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
VOORZICHTIG LEES DIT ZORGVULDIG DOOR VOORDAT U VERDERGAAT * Bewaar deze gebruikershandleiding op een veilige plaats voor eventuele toekomstige raadpleging. WAARSCHUWING Volg altijd de algemene voorzorgsmaatregelen op die hieronder worden opgesomd om te voorkomen dat u gewond raakt of zelfs sterft als gevolg van elektrische schokken, kortsluiting, schade, brand of andere gevaren.
Aansluitingen Data opslaan • Voordat u het instrument aansluit op andere elektronische componenten, moet u alle betreffende apparatuur uitzetten. Voordat u alle betreffende apparatuur aanof uitzet, moet u alle volumes op het minimum zetten. Voer de volumes van alle componenten, na het aanzetten, geleidelijk op tot het gewenste luisterniveau, terwijl u het instrument bespeelt.
Welkom Een mededeling van het ontwikkelingsteam van de S90 XS/S70 XS Dank u voor de aanschaf van de Yamaha S90 XS/S70 XS-muzieksynthesizer. Het doet ons zeer veel genoegen om de nieuwe S90 XS/S70 XS te introduceren als opvolger van de oorspronkelijke S90 ES. Deze synthesizer beschikt over kwalitatief zeer hoogwaardige muziekinstrumentgeluiden en biedt de respons van een echte piano, en is daarmee het instrument waaraan muzikanten in welk genre dan ook de voorkeur geven.
Belangrijkste eigenschappen van de S90 XS/S70 XS Zeer grote hoeveelheid waveforms en zeer uitgebreide geluidsselectie, waaronder pianoklanken van topkwaliteit De S90 XS/S70 XS bevat maar liefst 142 MB aan pianowaveforms van uitzonderlijk hoge kwaliteit, waaronder vele nieuwe gesamplede klanken, en een groot aantal voices dat direct afgeleid is van onze toonaangevende MOTIF XS Music Production Synthesizer, waarmee u beschikt over niet minder dan 456 MB aan beschikbare waveforms.
Over deze handleiding Gebruikershandleiding (dit boek) Legt uit hoe u de regelaars in het bovenste paneel kunt bedienen. PDF-documentatie (omvat tevens de cd-rom bij de gebruikershandleiding) Naslaggids Licht gedetailleerd toe hoe parameters voor klanken en effecten werken.
Inhoudsopgave Welkom................................................................................. 6 Een aangesloten computer gebruiken....................... 36 Accessoires .......................................................................... 6 Aansluiten op een computer...............................................36 Over de bijgeleverde schijf .................................................. 6 Belangrijkste eigenschappen van de S90 XS/S70 XS .........
Regelaars en functies Bovenpaneel 8 ! @ 7 6 # 5 $ 4 9 2 ) % ^ & * 3 A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 C2 1 1 Toetsenbord 6 Regeling INPUT GAIN De S90 XS beschikt over een keyboard met 88 toetsen, terwijl de S70 XS 76 toetsen heeft. De keyboards zijn voorzien van aanslaggevoeligheid (zowel initial touch als after touch).
Regelaars en functies ¤ ( B H ¥ ¦ J I Ú KL M Û O D N E A F Ü Ý C G C3 C4 ß P C5 C6 C7 Knoppen [PART ON/OFF] 1 – 4 9 Knop Slider Function Met deze knoppen schakelt u elke part in of uit. In de modus Voice is alleen Part 1 beschikbaar; deze is altijd ingeschakeld. Als u op deze knop drukt, worden de functies gewijzigd die zijn toegewezen aan de vier schuifregelaars. Het lampje naast de momenteel actieve parameters licht op.
Regelaars en functies * TRANSPOSE [-]/[+]-knoppen @ ! Gebruik deze knoppen om de algehele toonhoogte van de noot een halve toon te verhogen of verlagen. Om de normale octaafinstelling te herstellen, drukt u gelijktijdig op beide knoppen. ( LCD (Liquid Crystal Display) Op de LCD-display met achtergrondverlichting worden de parameters en waarden weergegeven die betrekking hebben op de huidige geselecteerde handeling of modus.
Regelaars en functies E Cursorknoppen K L Met de cursorknoppen kunt u de cursor verplaatsen in het scherm van de LCD-display, en de diverse parameters markeren en selecteren. J O M F Knop [EXIT] De menu' s en displays van de S90 XS/S70 XS zijn hiërarchisch geordend. Druk op deze knop om de huidige display te sluiten en terug te gaan naar het vorige niveau in de hiërarchie. Gebruik deze knop ook om een job- of opslaghandeling te annuleren.
Regelaars en functies P Nummerknoppen [1] – [16] N De werking van deze knoppen is afhankelijk van de aan/uit-status van de knoppen [PART], [MUTE] en [SOLO]. De indicator licht op als een van deze knoppen wordt ingeschakeld.
Regelaars en functies Achterpaneel 3 1 2 1 P (Schakelaar Power) Druk op deze schakelaar om de spanning Aan (O) of Uit (N) te zetten. 2 AC IN-aansluiting Hierop wordt het bijgeleverde netsnoer aangesloten. Gebruik uitsluitend het netsnoer dat wordt geleverd bij de S90 XS/S70 XS. 3 MIDI IN-, OUT- en THRU-aansluitingen Via MIDI IN worden alle besturings- of performancedata van een ander MIDI-apparaat ontvangen, zoals een externe sequencer.
Configuratie Spanningsvoorziening Sluit het bijgeleverde netsnoer op de volgende wijze aan. Zorg ervoor dat de schakelaar Power op de S90 XS/ S70 XS op OFF is ingesteld. 1 Sluit het bijgeleverde netsnoer aan op de AC IN (AC-ingangsaansluiting) op het achterpaneel van het instrument. 2 Sluit het andere eind van het netsnoer aan op een stopcontact.
Configuratie Het volume en de helderheid van de display aanpassen Boven in de display Master Play worden het masterprogrammanummer en de status (modus, bank, programmanummer en naam) weergegeven die voor het huidige masterprogramma zijn vastgelegd. OPMERKING Zie pagina 21 en 32 voor meer informatie over banks. Pas de volumeniveaus van de S90 XS/S70 XS en het aangesloten versterker/luidsprekersysteem aan.
Configuratie De initiële fabrieksinstellingen van het gebruikersgeheugen herstellen De S90 XS/S70 XS beschikt over de functie Factory Set (fabrieksinstellingen) voor het terugzetten van het geheugen van de S90 XS/S70 XS naar de standaardfabrieksinstellingen. Hiermee kunt u de het standaardprogramma van de S90 XS/S70 XS terugzetten, evenals de systeeminstellingen en andere instellingen herstellen.
Starthandleiding Modi De S90 XS/S70 XS beschikt over een aantal bedieningsmodi die kunnen worden geselecteerd met behulp van de zeven modusknoppen. Onder deze modi vallen: Voice, Performance, Multi, Master en Sequence Play. Afhankelijk van de modus die u selecteert, kunt u het toetsenbord bespelen en uw eigen originele muziek maken. Als u het toetsenbord conventioneel wilt bespelen, moet de modus Voice of Performance gebruiken.
Basisinstructies Voices – de belangrijkste bouwstenen van de S90 XS/S70 XS Voices, gecreëerd in de modusVoice, zijn de belangrijkste geluidsbouwstenen voor de andere modi van dit instrument. Het Performance- en Multi-programma bestaat uit verschillende voices. Dit instrument beschikt over een uitzonderlijk groot aantal vooraf ingestelde voices voor vrijwel elke muziekstijl. Probeer de diverse voices uit om uw favorieten te zoeken.
Het toetsenbord bespelen in de modus Voice In de display Voice Play (de bovenste display van de modus Voice) kunt u één voice selecteren en afspelen. De voices van dit instrument zijn in de volgende twee typen onderverdeeld: Normale voice De normale voices bestaan hoofdzakelijk uit melodische klanken van muziekinstrumenten (piano, orgel, gitaar enzovoort), die via het toetsenbordbereik kunnen worden afgespeeld. OPMERKING Raadpleeg 'Basisstructuur' voor meer informatie over voices.
Het toetsenbord bespelen in de modus Voice De functie Category Search gebruiken De voices zijn handig onderverdeeld in bepaalde categorieën, ongeacht in welke bank ze zijn opgeslagen. De categorieën zijn onderverdeeld op basis van het algemene instrumenttype of de klankeigenschappen. Met de functie Category Search hebt u snelle toegang tot de gewenste klanken. 1 Druk op de knop [CATEGORY SEARCH] in de display Voice Play. Het dialoogvenster Category Search verschijnt.
Het toetsenbord bespelen in de modus Voice Een voice uit de Favorite Category selecteren De klankkwaliteit van de voice wijzigen 1 Met de knoppen 1 – 4 kunt u een aantal parameters aanpassen voor de huidige voice, zoals effectdiepte, attack/release-eigenschappen, timbre en overige parameters. U kunt vijf functies toewijzen aan elke knop, die u één voor één kunt kiezen via de bij elke knop behorende functieknoppen. Druk op de knop [FAVORITE] in de display Voice Play.
Het toetsenbord bespelen in de modus Voice Het elementniveau aanpassen De Edit-indicator (E) Als u de waarde van de parameter wijzigt in de display Voice/Performance/Multi Play of Edit, wordt de Editindicator weergegeven in de rechterbovenhoek van de LCD-display. Dit is een korte herinnering dat de huidige voice/performance/multi is gewijzigd, maar nog niet is opgeslagen. Als u de huidige bewerkte status wilt opslaan, volgt u de aanwijzingen op. 1 Druk op de knop [EDIT] in de modus Voice.
Het toetsenbord bespelen in de modus Voice 4 Verplaats de cursor naar 'Effect' en druk op de knop [ENTER]. 8 De display Voice Edit Effect wordt weergegeven. Verplaats de cursor naar 'Preset' en selecteer de vooraf vastgelegde instelling met behulp van de draaiknop Data. De vooraf vastgelegde instelling bevat de typische instellingen van parameters voor het momenteel geselecteerde effecttype.
Het toetsenbord bespelen in de modus Voice De arpeggiofunctie gebruiken Met de arpeggiofunctie worden automatisch muzikale en ritmische frasen, riffs en ritmische patronen geactiveerd op basis van de noten die u speelt. Hiermee beschikt u niet alleen over inspiratie en complete ritmische passages voor uw eigen spel, u beschikt tevens over kwalitatief hoogwaardige MIDI-data die u kunt gebruiken voor het maken van songs of kanten-klare begeleidingspartijen die u kunt gebruiken bij live optredens.
Het toetsenbord bespelen in de modus Voice 6 Nadat u uw favoriete patroon hebt gekozen, drukt u op de knop [STORE] om de instellingen op te slaan als gebruikersvoice. Het arpeggiotype kopiëren naar een ander arpeggiopart Voer de instructies uit voor het kopiëren van het arpeggiotype dat is toegewezen aan Arp 1 naar Arp 2 – 5. 1 Selecteer 'ARP SELECT' door op de knop Arpeggio/Effect Function te drukken. 2 Druk op de functieknop [1].
Een nieuwe performance maken met behulp van uw favoriete voice (Performance Creator) Dit instrument beschikt over een handige functie Performance Creator, waarmee u een nieuwe performance kunt maken op basis van de favoriete voices die u in de modus Voice hebt gevonden. Met deze functie kunt u de aan de voice gekoppelde parameterinstellingen (zoals effecten) kopiëren naar de performance, zodat u snel en gemakkelijk exact het gewenste geluid kunt instellen.
Een nieuwe performance maken met behulp van uw favoriete voice (Performance Creator) Split—Spelen met twee verschillende voices voor uw linker- en rechterhand 4 In dit gedeelte wordt toegelicht hoe u een performance kunt maken waarbij het toetsenbord wordt onderverdeeld in twee secties: het linkerhand- en het rechterhandgedeelte. De laagste noot van het rechterhandgedeelte wordt het splitpunt genoemd.
Een nieuwe performance maken met behulp van uw favoriete voice (Performance Creator) Drum Assign—Een drumpart combineren met de huidige voice In dit gedeelte wordt uitgelegd hoe u een performance kunt maken waarin u een drumpatroon kunt triggeren (via de arpeggiofunctie) naast het afspelen van de huidige voice. 1 Het drumpatroon (arpeggiotype) wijzigen Als u de functie Drum Assign uitvoert, wordt de drumvoice toegewezen aan Part 4 en wordt de arpeggio voor Part 4 ingeschakeld.
Een nieuwe performance maken met behulp van uw favoriete voice (Performance Creator) 9 Zoek uw favoriete patroon door Main Category/Sub Category/Type te wijzigen met behulp van de draaiknop Data. 5 Selecteer het gewenste teken met behulp van de draaiknop Data en de cursorknoppen en druk op de knop [INC] om het geselecteerde teken in te voeren. Druk op de knop [DEC] om het geselecteerde teken te annuleren. U kunt maximaal 20 alfanumerieke tekens invoeren.
Het toetsenbord bespelen in de modus Performance Een performance selecteren Het selecteren van een performance gebeurt in principe op dezelfde manier als het selecteren van een voice. De functie Category Search is ook beschikbaar in de modus Performance Play. Houd er rekening mee dat de S90 XS/S70 XS niet wordt geleverd met vooraf ingestelde performances en over slechts drie gebruikersbanken beschikt.
Zingen via een aangesloten microfoon Door een microfoon aan te sluiten op de MIC INPUT-aansluiting (comboaansluiting) op het achterpaneel van het instrument, kunt u meezingen met uw eigen spel. U kunt ook de ingebouwde effecten toepassen op deze signaalinvoer via the MIC-aansluiting, waaronder het onderscheidende Vocoder-effect. In het onderstaande voorbeeld wordt ervan uitgegaan dat u wilt meezingen tijdens het bespelen van het toetsenbord.
Opnemen/afspelen met een USB-opslagapparaat (modus Audio Record/Play) In de modus Audio Record/Play kunt u uw toetsenbordspel opnemen als audiodata. De opgenomen audiodata worden als audiobestand opgeslagen in de rootdirectory van een extern USB-opslagapparaat of het interne flashgeheugen, zodat u het audiobestand kunt afspelen vanaf de opgegeven opslaglocatie. Opnemen 4 In deze sectie leert u hoe u uw toetsenbordspel kunt opnemen als een stereo Wave-bestand (van 44,1 kHz/ 16 bits).
Opnemen/afspelen met een USB-opslagapparaat (modus Audio Record/Play) 8 Druk op de knop [ENTER] als het bericht Save Audio Rec file? wordt weergegeven. De opnamen afspelen Uw spel wordt opgeslagen als audiobestand in de rootdirectory van het USB-opslagapparaat. Bij het voltooien van de opname wordt de display Audio Play opgeroepen. Nu u de uitvoering hebt opgenomen als geluidsbestand, kunt u dit afspelen.
Een aangesloten computer gebruiken Door dit instrument op een computer aan te sluiten, kunt u de volgende functies en toepassingen gebruiken. • De externe toongenerator voor DAW-software en het MIDI-keyboard • Op afstand bedienen van de DAW-software • Meer gedetailleerde voicebewerking vanaf de computer (S90 XS/S70 XS Editor) 3 Aansluiten op een computer Controleer of de USB TO HOST-aansluiting van dit instrument is geactiveerd.
Een aangesloten computer gebruiken Voorzorgsmaatregelen bij het gebruik van de USB TO HOST-aansluiting Neem het volgende in acht wanneer u de S90 XS/S70 XS via de USB TO HOST-aansluiting met uw computer verbindt. Als u dat niet doet, bestaat het risico dat het instrument en/ of de computer blokkeren, waardoor er data kunnen worden beschadigd of verloren gaan. Als de computer of de S90 XS/S70 XS vastloopt, schakelt u de S90 XS/S70 XS uit en opnieuw in en start u vervolgens de computer opnieuw op.
Een aangesloten computer gebruiken Als een multitimbrale toongenerator (modus Multi) gebruiken In de volgende instructies wordt uitgelegd hoe u dit instrument als MIDI-toongenerator gebruikt. In dit geval worden de daadwerkelijke MIDI-sequencedata verzonden vanaf een DAW of sequencer op de computer, zodat u geen softwaresynths hoeft te gebruiken en processorkracht op de computer kunt besparen. De S90 XS/S70 XS configureren 1 Druk op de knop [MULTI/SEQ PLAY] om de modus Multi te activeren.
Een aangesloten computer gebruiken Configureren voor op afstand besturen OPMERKING Voordat u de configuratie uitvoert van DAW Remote, dient u het USB-MIDI-stuurprogramma en de S90 XS/ S70 XS Remote Tools correct te installeren. SONAR 1 Open het menu [Options] en selecteer [MIDI Devices] om het venster 'MIDI Devices' op te roepen. 2 Voeg 'Yamaha S90 XS (S70 XS)-2' toe aan Input Device, en voeg 'Yamaha S90 XS (S70 XS)-2' toe aan Output Device.
Een aangesloten computer gebruiken Een besturingssjabloon bewerken Gebruik de S90 XS/S70 XS Remote Editor voor het bewerkingen van de control template. De S90 XS/S70 XS Remote Editor kunt u downloaden met behulp van de volgende URL: http://www.yamahasynth.com/download/ Raadpleeg de PDF-handleiding die bij de software is geleverd voor instructies voor het gebruik van de S90 XS/ S70 XS Remote Editor.
Op het toetsenbord meespelen tijdens het afspelen van het MIDI-bestand U dient de modus Multi of Sequence Play te gebruiken als u op het keyboard wilt meespelen tijdens het afspelen van het MIDI-bestand. Dit instrument beschikt over een sequencer met 16 sporen voor het afspelen, waarmee u dus MIDI-data op maximaal 16 sporen kunt afspelen. Bereid het MIDI-bestand voor (via de DAW-software of op andere wijze) en sla het vervolgens op een USBopslagapparaat op voordat u de volgende instructies uitvoert.
Op het toetsenbord meespelen tijdens het afspelen van het MIDI-bestand 9 Druk enkele keren op de knop [EXIT] om terug te keren naar de modus Sequence Play. Via dezelfde handelingen kunt u audiobestanden selecteren. 10 Verplaats de cursor naar chain step 003 met behulp van de cursorknoppen en selecteer vervolgens 'end' met behulp van de draaiknop Data en de knop [DEC]/[INC]. 11 Selecteer de part voor het keyboardspel door op een van de knoppen [1] – [16] te drukken.
Als een Masterkeyboard gebruiken (modus Master) Met de modus Master kunt u: • Maximaal 128 programma’s maken en opslaan, die elk een voice, een performance of een multi bevatten, en die allemaal onmiddellijk voor gebruik kunnen worden opgeroepen. • Maximaal vier afzonderlijke zones toewijzen in elk masterprogramma voor gebruik als een masterkeyboard.
Als een Masterkeyboard gebruiken (modus Master) 3 Druk op de knop [EDIT]. 8 De display Master Edit Select wordt weergegeven. Selecteer 'Zone 1' met behulp van de cursorknoppen en druk vervolgens op de knop [ENTER]. De display Zone Edit Select wordt weergegeven. 4 Selecteer 'Common' en druk op de knop [ENTER]. De display Common Edit verschijnt. 5 9 Selecteer 'Zone Sw' en druk op de knop [ENTER]. Leg de instellingen van Zone 1 respectievelijk vast in de displays Transmit, Note, Preset en Knb/Sldr.
Algemene systeeminstellingen aanpassen (modus Utility) In de modus Utility kunt u de parameters instellen die op het hele systeem van dit instrument van toepassing zijn. Druk op de knop [UTILITY] om de modus Utility in te schakelen. Druk op de knop [EXIT] om terug te keren naar de oorspronkelijke display. In dit gedeelte worden enkele handige functies van de modus Utility beschreven.
Algemene systeeminstellingen aanpassen (modus Utility) De instellingen voor paneelvergrendeling wijzigen Panel Lock Hiermee wordt bepaald welke knoppen worden 'vergrendeld' of niet beschikbaar zijn nadat u op de knop [PANEL LOCK] op het paneel hebt gedrukt. Als het vinkje wordt verwijderd uit het selectievakje, is de overeenkomende knop beschikbaar, zelfs als paneelvergrendeling wordt ingeschakeld.
Data opslaan/laden (modus File) In de modus File kunt u data opslaan/laden zoals voices en performances die u op het instrument hebt gemaakt. Druk op de knop [FILE] om de modus File te activeren. In dit gedeelte wordt toegelicht hoe u alle data in het gebruikersgeheugen van dit instrument kunt opslaan/laden als 'All'bestand (extensie: X2A). De instellingen opslaan op een USB-opslagapparaat 1 Sluit een USB-opslagapparaat aan op de USB TO DEVICE-aansluiting van dit instrument.
Data opslaan/laden (modus File) De instellingen laden van een USB-opslagapparaat 1 Sluit een USB-opslagapparaat aan op de USB TO DEVICE-aansluiting van dit instrument. 2 Druk op de knop [FILE] om de modus File te activeren. De display File Select verschijnt. 3 Selecteer 'Laden' met behulp van de cursorknoppen en druk vervolgens op de knop [ENTER]. Het interne flashgeheugen en het USB-opslagapparaat worden weergegeven in de display File Load.
Data opslaan/laden (modus File) USB-opslagapparaten Aansluitingsvoorbeelden Voorzorgsmaatregelen bij het gebruik van de USB TO DEVICE-aansluiting Houd rekening met de volgende punten: USB-opslagapparaat zoals een hardeschijfstation USB-flashgeheugen of USB TO DEVICE-aansluiting S90 XS/S70 XS Compatibele USB-apparaten LET OP Als het aangesloten USB-opslagapparaat beschikt over een eigen voeding, mag u de stroomvoorziening van het USBapparaat in werking niet in- of uitschakelen en de USB-kabel niet aa
Appendix Displayberichten LCD-indicatie 50 Beschrijving All data is initialized upon power-on. Continue? Hiermee kunt u bevestigen of u de parameter 'Power on auto factory set switch' wilt in- of uitschakelen. Are you sure? Hiermee bevestigt u of u een bepaalde handeling wilt uitvoeren. Assign Vocoder Voice to Part 1.
Displayberichten LCD-indicatie Beschrijving Load All Performances. Are you sure? Hiermee kunt u bevestigen of u 'All Performances' wilt laden in de modus File. Load All Voices. Are you sure? Hiermee kunt u bevestigen of u 'All Voices' wilt laden in de modus File. Load All without system. Are you sure? Hiermee kunt u bevestigen of u 'All without system' wilt laden in de modus File. Load All. Are you sure? Hiermee kunt u bevestigen of u 'All' wilt laden in de modus File. Load Seq Chain file.
Problemen oplossen In de volgende tabel vindt u tips voor het oplossen van problemen en paginaverwijzingen voor veel voorkomende problemen. U kunt het probleem mogelijk oplossen door de bewerking Factory Set (pagina 18) (fabrieksinstellingen) uit te voeren nadat u een back-up hebt gemaakt van uw data op een extern opslagapparaat. Als het probleem zich blijft voordoen, moet u contact opnemen met uw Yamaha-dealer of -servicenter (pagina 63).
Problemen oplossen Zijn de parameters voor de elementschakelaar, partschakelaar, nootlimiet en de aanslagsnelheidslimiet correct ingesteld? [VOICE] Æ [EDIT] Æ [MUTE] (licht op) Æ Nummerknoppen [9] – [16] [PERFORM] Æ [PART ON/OFF] [PERFORM] Æ [EDIT] Æ Part selecteren Æ Play Mode Æ Note Limit Lo/Hi [PERFORM] Æ [EDIT] Æ Part selecteren Æ Play Mode Æ Velocity Limit Lo/Hi Als de performance/multi geen geluid produceert: is er een voice toegewezen aan elke part? [PERFORM] Æ [EDIT] Æ Part selecteren Æ Voice
Problemen oplossen Het afspelen gaat door zonder te stoppen Als de knop [ARP ON/OFF] is ingeschakeld, moet u erop drukken, zodat het bijbehorende lampje wordt uitgeschakeld. Druk in de modus Sequence Play op de knop [START/STOP]. Als het click-geluid (metronoom) niet stopt, houdt u de knop [SHIFT] ingedrukt en drukt u op de knop [START/ STOP] om het geluid te stoppen.
Problemen oplossen Onjuiste of onverwachte toonhoogte Is de parameter Tune in de modus Utility ingesteld op een andere waarde dan '0'? [UTILITY] Æ General Æ Tune Is de parameter Note Shift in de modus Utility ingesteld op een andere waarde dan '0'? [UTILITY] Æ General Æ Note Shift Als de voice een verkeerde toonhoogte produceert: is het juiste stemmingssysteem geselecteerd voor de parameter Micro Tune in de modus Voice Editor? [UTILITY] Æ Micro Tune Als de Performance/Multi een verkeerde toonhoo
Problemen oplossen Kan de Arpeggio niet starten Controleer of de knop [ARP ON/OFF] is ingeschakeld of uitgeschakeld. Is de parameter MIDI Sync ingesteld op automatisch of intern (met gebruik van de interne klok)? [UTILITY] Æ MIDI Æ MIDI sync Hebt u een type gebruikersarpeggio geselecteerd (zonder gebruikersdata)? Als u gebruikersarpeggio’s wilt gebruiken, moeten de gebruikersarpeggiodata die in de MOTIF XS zijn gemaakt, worden geladen in de S90 XS/S70 XS.
Problemen oplossen Verzending/ontvangst van MIDI-bulkdata werkt niet correct Is de parameter Receive Bulk ingesteld op 'off'? Stel de parameter Receive Bulk in op 'on'. [UTILITY] Æ [MIDI] Æ Receive Bulk Als de data zijn opgeslagen met de functie Bulk Dump van de S90 XS/S70 XS, moet het apparaatnummer worden ingesteld op dezelfde waarde die werd gebruikt vóór de bulkdumpverzending. [UTILITY] Æ [MIDI] Æ Device No.
Specificaties Keyboard S90 XS S70 XS 88 toetsen, 'Balanced Hammer Effect'toetsenbord (Initial Touch/Aftertouch) 76 toetsen, 'Balanced Hammer Effect'toetsenbord (Initial Touch/Aftertouch) Toongenerator AWM2 met Expanded Articulation Maximale polyfonie 128 noten Multitimbrale capaciteit 16 interne parts + Mic Input-part Wave 456 MB (indien geconverteerd naar 16-bits lineaire indeling), 2772 waveforms Voice Preset: 1024 normale voices + 64 drum kits GM: 128 normale voices + 1 drum kit User: 128
Index A G Afspelen......................................................................... 35 Arp 1 – 5 ........................................................................ 26 Arp 1 – 5 Type ............................................................... 26 [ARP ON/OFF]............................................................... 26 ARP SELECT ................................................................ 27 Arp Select ......................................................................
Index N Z Name ............................................................................. 31 Naslaggids ....................................................................... 8 Normale voice................................................................ 21 Nummer [1] – [16] .......................................................... 14 Zone............................................................................... 43 Zone Switch ...................................................................
ATTENTIE SOFTWARELICENTIEOVEREENKOMST LEES DEZE SOFTWARELICENTIEOVEREENKOMST ("OVEREENKOMST") ZORGVULDIG DOOR VOORDAT U DEZE SOFTWARE GEBRUIKT. U MAG DEZE SOFTWARE ALLEEN GEBRUIKEN ALS U INSTEMT MET ALLE VOORWAARDEN EN BEPALINGEN DIE IN DEZE OVEREENKOMST WORDEN GENOEMD. DIT IS EEN OVEREENKOMST TUSSEN U (ALS INDIVIDU OF JURIDISCHE EENHEID) EN YAMAHA CORPORATION ("YAMAHA"). DOOR DE VERZEGELING VAN DIT PAKKET TE VERBREKEN STEMT U ERMEE IN DAT DE VOORWAARDEN IN DEZE OVEREENKOMST BINDEND ZIJN.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
Neem voor details over producten contact op met uw dichtstbijzijnde Yamaha-vertegenwoordiging of de geautoriseerde distributeur uit het onderstaande overzicht. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S.A. de C.V. Calz. Javier Rojo Gómez #1149, Col.
Yamaha Web Site (English only) http://www.yamahasynth.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2009 Yamaha Corporation 909MW0.