User Manual

Press the [START/STOP] button to start installation.

Go on to step 4. (Executing the installation).

Press the [BREAK] button to delete the data the upgrade

data in the USB device.

Go on to step 5. (Deleting the upgrade data).

Installation Procedure

Connecting the USB device

Installing the upgrade program

Caution: Make sure that the USB device is connected properly to the

terminal. Do not try to force an incorrect connection; doing so

may damage the terminal.

Caution: Do not turn off the power or remove the USB media during this operation.

1) Download the Zip file.

2) Extract the six files included in the Zip file.

3) Insert the USB device into your computer.

4) Copy the extracted files into the root directory of the USB device.

Connect the USB device containing the appropriate upgrade data

to the USB TO DEVICE terminal on the instrument.

Simultaneously hold down the [START/STOP] button in the STYLE CONTROL section and turn on

the power.

Keep holding down the [START/STOP] button until the following display is shown.

After a few moments, the following display appears.

Press [START/STOP] button to start the

installation.

When the installation is completed, the

following display appears.

Turn off the power switch on the instrument.

Downloading the firmware

Executing the installation

PAGE 1
Installation Procedure Caution: Do not turn off the power or remove the USB media during this operation. 1 Downloading the firmware 1) Download the Zip file. 2) Extract the six files included in the Zip file. 3) Insert the USB device into your computer. 4) Copy the extracted files into the root directory of the USB device. 2 Connecting the USB device Connect the USB device containing the appropriate upgrade data to the USB TO DEVICE terminal on the instrument.
PAGE 2
5 Deleting the upgrade data Press the [BREAK] button to call up the following display. Press [START/STOP] button to start deleting the upgrade data from the USB device. When the deletion of the upgrade data is completed, the following display appears. The upgrade data has been deleted from the USB device. Turn off the power switch of the instrument and remove USB device. Confirming the version number Turn on the power of the instrument normally and wait until the main display appears.