User Manual
Table Of Contents
- Welcome
- Accessories
- About the accessory disk
- S90 XS/S70 XS Main Features
- About this Manual
- Contents
- Controls and Functions
- Setting Up
- Start Guide
- Modes
- Basic Instructions
- Playing the Keyboard in the Voice mode
- Creating a New Performance by Using Your Favorite Voice (Performance Creator)
- Playing the Keyboard in the Performance Mode
- Singing with a Connected Microphone
- Recording/Playing Back with a USB Storage Device (Audio Record/Play Mode)
- Using a Connected Computer
- Playing the Keyboard Along with Playback of the MIDI File
- Using as a Master Keyboard (Master Mode)
- Making Global System Settings (Utility Mode)
- Saving/Loading Data (File Mode)
- Appendix
- Display Messages
- Troubleshooting
- No Sound
- No sound from the MIC INPUT jack
- Split does not work via the external MIDI device
- Playback continues without stopping
- The sound is distorted
- Sound is cut off
- Only one note sounds at a time
- Wrong pitch or unexpected pitch
- No effect is applied
- Vocoder does not work when selecting a Vocoder Voice
- The Edit Indicator appears, even when parameters are not being edited
- Cannot start the Arpeggio
- Cannot stop the Arpeggio
- The Voice assigned to the Performance produces a different sound from the one in the Voice mode
- Data communication between the computer and the S90 XS/S70 XS does not work properly
- The S90 XS/S70 XS does not sound properly even when playing back the song data on the computer or the MIDI instrument connected to the S90 XS/S70 XS
- MIDI bulk data transmission/reception does not work properly
- Cannot save data to the external USB storage device
- Cannot play an audio file
- Cannot enter the Edit mode
- Specifications
- Index
S90 XS/S70 XS Owner’s Manual
29
Creating a New Performance by Using Your Favorite Voice (Performance Creator)
Split—Playing two
different Voices with your
left and right hands
This section shows you how to create a Performance in
which the keyboard is divided into two sections—the left-
hand section and the right-hand. The lowest note of the
right-hand section is referred to as the “Split Point.” By
creating such a Performance, you can play a bass part
with your left hand, and a piano part with your right, for
example.
1 Select a Voice in the Voice mode.
2 Press the [SPLIT] button on the panel.
The Split display appears.
3 Move the cursor to “SPLIT POINT” then set
the Split Point.
You can determine the Split Point by holding the [SHIFT]
button then pressing the desired note on the keyboard.
NOTE
The note set to the Split Point is included in the upper
section of the keyboard.
4 Move the cursor to “LO/UP” then select
whether the desired Voice is assigned to the
lower section or the upper section of the
keyboard.
NOTE When the original Voice is a Drum Voice, the Split Point of
the original Drum Voice is not changed even if LO/UP is set.
5 Move the cursor to “Main”/”Sub” then select
the Category that includes your desired
Voice.
6 Press the Cursor [R] button.
The Voice list is shown.
7 Select the desired Voice from the list, then
press the [ENTER] button.
The Performance Play display will appear.
8 Press the [STORE] button to store the
settings as a Performance.