User Manual
Table Of Contents
- Welcome
- Accessories
- About the accessory disk
- S90 XS/S70 XS Main Features
- About this Manual
- Contents
- Controls and Functions
- Setting Up
- Start Guide
- Modes
- Basic Instructions
- Playing the Keyboard in the Voice mode
- Creating a New Performance by Using Your Favorite Voice (Performance Creator)
- Playing the Keyboard in the Performance Mode
- Singing with a Connected Microphone
- Recording/Playing Back with a USB Storage Device (Audio Record/Play Mode)
- Using a Connected Computer
- Playing the Keyboard Along with Playback of the MIDI File
- Using as a Master Keyboard (Master Mode)
- Making Global System Settings (Utility Mode)
- Saving/Loading Data (File Mode)
- Appendix
- Display Messages
- Troubleshooting
- No Sound
- No sound from the MIC INPUT jack
- Split does not work via the external MIDI device
- Playback continues without stopping
- The sound is distorted
- Sound is cut off
- Only one note sounds at a time
- Wrong pitch or unexpected pitch
- No effect is applied
- Vocoder does not work when selecting a Vocoder Voice
- The Edit Indicator appears, even when parameters are not being edited
- Cannot start the Arpeggio
- Cannot stop the Arpeggio
- The Voice assigned to the Performance produces a different sound from the one in the Voice mode
- Data communication between the computer and the S90 XS/S70 XS does not work properly
- The S90 XS/S70 XS does not sound properly even when playing back the song data on the computer or the MIDI instrument connected to the S90 XS/S70 XS
- MIDI bulk data transmission/reception does not work properly
- Cannot save data to the external USB storage device
- Cannot play an audio file
- Cannot enter the Edit mode
- Specifications
- Index
![](/manual/yamaha/s90xs-s70xs/11-10-9-8-7-6-5-4-3-2-1-user-manual-english/images/img-31.png)
S90 XS/S70 XS Owner’s Manual
31
Creating a New Performance by Using Your Favorite Voice (Performance Creator)
9 Find your favorite pattern by changing the
Main Category/Sub Category/Type with the
data dial.
You can change the pattern of the Arp 2 – 5 via the same
operation. To change the Arpeggio from among the five
types, use the Function button. Turn “ARP SELECT” on by
pressing the Arpeggio/Effect Function button then press
the Function button.
Assigning a name to the
Performance
You can assign the name to the Voice and Performance
then store the settings as a User Voice/Performance.
1 Press the [EDIT] button in the Performance
Play display.
The Performance Edit Select display appears.
2 Select “Common” by using the cursor
buttons then press the [ENTER] button.
3 Select “Name” by using the cursor buttons
then press the [ENTER] button.
4 Press the [ENTER] button with “Name”
selected.
The Naming dialog appears.
5 Select the desired character by using the
data dial and cursor buttons then press the
[INC] button to enter the selected character.
To cancel the selected character, press the
[DEC] button.
You can enter up to 20 alphanumeric characters.
6 After entering the characters, press the
[ENTER] button.
7 Press the [STORE] button.
The destination User Banks and Programs are shown.
8 Select the desired Bank and Program then
press the [ENTER] button.
9 After the confirmation dialog appears, press
the [ENTER] button.
NOTE When you press the [EDIT] button in the Store display, you
can check the sound of the Voice/Performance/Multi at the
storing destination.
Arpeggio/Effect Function button
Function button