User Manual
Table Of Contents
- Welcome
- Accessories
- About the accessory disk
- S90 XS/S70 XS Main Features
- About this Manual
- Contents
- Controls and Functions
- Setting Up
- Start Guide
- Modes
- Basic Instructions
- Playing the Keyboard in the Voice mode
- Creating a New Performance by Using Your Favorite Voice (Performance Creator)
- Playing the Keyboard in the Performance Mode
- Singing with a Connected Microphone
- Recording/Playing Back with a USB Storage Device (Audio Record/Play Mode)
- Using a Connected Computer
- Playing the Keyboard Along with Playback of the MIDI File
- Using as a Master Keyboard (Master Mode)
- Making Global System Settings (Utility Mode)
- Saving/Loading Data (File Mode)
- Appendix
- Display Messages
- Troubleshooting
- No Sound
- No sound from the MIC INPUT jack
- Split does not work via the external MIDI device
- Playback continues without stopping
- The sound is distorted
- Sound is cut off
- Only one note sounds at a time
- Wrong pitch or unexpected pitch
- No effect is applied
- Vocoder does not work when selecting a Vocoder Voice
- The Edit Indicator appears, even when parameters are not being edited
- Cannot start the Arpeggio
- Cannot stop the Arpeggio
- The Voice assigned to the Performance produces a different sound from the one in the Voice mode
- Data communication between the computer and the S90 XS/S70 XS does not work properly
- The S90 XS/S70 XS does not sound properly even when playing back the song data on the computer or the MIDI instrument connected to the S90 XS/S70 XS
- MIDI bulk data transmission/reception does not work properly
- Cannot save data to the external USB storage device
- Cannot play an audio file
- Cannot enter the Edit mode
- Specifications
- Index
S90 XS/S70 XS Owner’s Manual
41
The Multi mode/Sequence Play mode should be used when you want to play the keyboard along with playback of the
MIDI file. This instrument is equipped with a 16-track sequencer for playback, allowing you to play back MIDI data of up
to 16 tracks.
Before executing the instructions below, prepare the MIDI file (via DAW software or other means) then save it to a USB
storage device. You should also create an appropriate Multi for playback.
1 Connect the USB storage device including
the MIDI files to the USB TO DEVICE terminal
on the rear panel of this instrument.
2 Press the [MULTI/SEQ PLAY] button a few
times to enter the Sequence Play mode.
3 Select the Chain Step 001 then select the
desired Multi for playback of the MIDI file by
using the data dial and the [DEC]/[INC]
buttons.
4 Move the cursor to Chain Step 002 by using
the cursor buttons then press the [ENTER]
button.
The File Load display appears.
5 Select the USB storage device path (“usb1-1”
in this example) then press the [ENTER]
button.
6 Select the desired MIDI file then press the
[ENTER] button.
7 Press the [ENTER] button after the display for
selecting the Sequence Chain Step number is
shown.
8 Press the [ENTER] button again after the
confirmation display is shown.
Playing the Keyboard Along with Playback of the MIDI File