User Manual
Table Of Contents
- Welcome
- Accessories
- About the accessory disk
- S90 XS/S70 XS Main Features
- About this Manual
- Contents
- Controls and Functions
- Setting Up
- Start Guide
- Modes
- Basic Instructions
- Playing the Keyboard in the Voice mode
- Creating a New Performance by Using Your Favorite Voice (Performance Creator)
- Playing the Keyboard in the Performance Mode
- Singing with a Connected Microphone
- Recording/Playing Back with a USB Storage Device (Audio Record/Play Mode)
- Using a Connected Computer
- Playing the Keyboard Along with Playback of the MIDI File
- Using as a Master Keyboard (Master Mode)
- Making Global System Settings (Utility Mode)
- Saving/Loading Data (File Mode)
- Appendix
- Display Messages
- Troubleshooting
- No Sound
- No sound from the MIC INPUT jack
- Split does not work via the external MIDI device
- Playback continues without stopping
- The sound is distorted
- Sound is cut off
- Only one note sounds at a time
- Wrong pitch or unexpected pitch
- No effect is applied
- Vocoder does not work when selecting a Vocoder Voice
- The Edit Indicator appears, even when parameters are not being edited
- Cannot start the Arpeggio
- Cannot stop the Arpeggio
- The Voice assigned to the Performance produces a different sound from the one in the Voice mode
- Data communication between the computer and the S90 XS/S70 XS does not work properly
- The S90 XS/S70 XS does not sound properly even when playing back the song data on the computer or the MIDI instrument connected to the S90 XS/S70 XS
- MIDI bulk data transmission/reception does not work properly
- Cannot save data to the external USB storage device
- Cannot play an audio file
- Cannot enter the Edit mode
- Specifications
- Index
S90 XS/S70 XS Owner’s Manual
54
Troubleshooting
Playback continues without stopping
When the [ARP ON/OFF] button is turned on, press it so that its lamp is turned off.
In Sequence Play Mode, press the [START/STOP] button.
When the click (metronome) sound continues, hold down the [SHIFT] button and press the [START/STOP]
button to stop the sound.
The sound is distorted
Are the effect settings appropriate?
Use of an effect at certain settings may produce distortion.
Use of the Master Effect at certain settings may produce distortion.
Are the filter settings appropriate?
Excessively high filter resonance settings can cause distortion.
Are any of the following volume parameters set so high that clipping is occurring?
Sound is cut off
Is the entire sound (via your keyboard playback and Sequence playback) exceeding the maximum polyphony
of the synthesizer?
Only one note sounds at a time
When this situation occurs, the Mono/Poly parameter in the current mode is set to “mono.”
If you wish to play chords, set this parameter to “poly.”
[VOICE] [EDIT] Effect
[PERFORM] [EDIT] Common Effect
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Common Effect
[UTILITY] Voice Master FX
[PERFORM] [EDIT] Common Effect Master
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Common Effect Master
[VOICE] [EDIT] Filter/EG
[PERFORM] [EDIT] Common Filter/EG
[PERFORM] [EDIT] Part selection Filter/EG
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Part selection Filter/EG
[UTILITY] General Volume
[UTILITY] General L&R Gain
[VOICE] [EDIT] Play Mode Volume
[PERFORM] [EDIT] Common Play Mode Volume
[PERFORM] [EDIT] Part selection Play Mode Volume
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Part selection Play Mode Volume
[VOICE] [EDIT] Play Mode Mono/Poly
[PERFORM] [EDIT] Part selection Play Mode Mono/Poly
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Part selection Play Mode Mono/Poly