User Manual

Keyboard Arp & Drum Pad Owner’s Manual 3
Utility window
This window lets you set the parameters common to the Keyboard and Drum Pad displays.
Sets the MIDI Transmit Channel from the Keyboard
display.
Determines the Velocity transmitted when tapping
a key in the Keyboard display.
Determines the Modulation speed when
[MODULATION] is tapped in the Keyboard display.
Tapping this calls up the Owner’s Manual.
Tapping here initializes all the settings.
Indicates the program version.
Determines the connection method between the
iPad and MIDI instrument.
cable: Should be selected when connected via
the i-MX1.
wireless: Should be selected when connected via
wireless Network MIDI.
NOTE
When set to “wireless,” make the Wi-Fi setup in Settings > Wi-Fi
in your iPad.
Determines whether Arpeggio/Step Sequencer
playback will be synchronized to the internal clock or
the external MIDI clock.
internal: Playback is synchronized to the internal clock.
external: Playback is synchronized to the external
MIDI clock received from an external MIDI instrument
via MIDI.
auto: When MIDI clock continuously comes from an
external MIDI device, playback is synchronized to the
external MIDI clock. When no MIDI clock continuously
comes from an external MIDI device, playback is
synchronized to the internal MIDI clock.
NOTE
When the MIDI Type is set to “wireless,” only “internal” is available.
Sets the MIDI Transmit Channel from the Drum Pad
display.
When set to “Arp,” the Drum Pad display lets
you control Arpeggio playback via the Keyboard
Transmit Channel.
Selects the MIDI port of the instrument in case of
wireless connection.
Determines the MIDI Control Change number assigned
to “ASSIGN1” in the Slider section of the Keyboard
display.
Determines the MIDI Control Change number
assigned to “ASSIGN2” in the Slider section of the
Keyboard display.
Utility window