User Manual

Troubleshooting

S90 XS/S70 XS Remote Editor Owner’s Manual

On the DAW software other than Cubase, the set parameters are not controlled.

• The Remote control functions are available only for Cubase. Set the Remote/CC buttons (page 8)

to "CC."

• Make sure to select a parameter except to "Cubase" on the Daw Select display of the Utility mode

in the S90 XS/S70 XS instrument.

Even when I select another track on the DAW software, the VSTi to be controlled does

not change; instead, the VSTi which is assigned to the previously selected track

remains under control.

• On the DAW's Preferences dialog, select [Editing]-[Project & Mixer], then checkmark both "Sync

Project and Mixer Selection" and "Enable Record on Selected Track."

• When using Cubase, select "Yamaha S90 XS/S70 XS" in the Remote Device Setup window, then

select Port 2 for the S90 XS/S70 XS as the MIDI Input/Output.

• Make sure to set the S90 XS/S70 XS instrument to the Remote mode.

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

906MW-A0