User Manual

Reference Manual
Reference
115
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Master
Play
Edit Select
Common Select
Name
Memory
Zone Sw
Zone Edit Select
Transmit
Note
Preset
Knob/Slider
Job Select
Bulk
Initialize
Appendix
Basic Structure
Master Mode
The Master mode offers the following two features:
• Up to 128 programs consisting of either a Voice, a Performance, or a Multi can be created, stored and called up.
• For each Master program, four independent keyboard Zones can be set.
You can use the Master mode to memorize the settings you use most often including the information which mode is
used, and call them up instantly anytime you need them with a single button press. Furthermore, you can memorize the
settings for controlling external MIDI devices to the Master, resulting that you can change external MIDI tone generators
connected to this instrument in sequence while performing on the live stage.
Master Play
To enter the Master Play mode and call up the Master Play display, press the [MASTER] button from the current mode.
Selecting a Master Program
The S90 XS/S70 XS features 128 specially programmed Masters, stored to internal User Memory. The Bank consists of
eight Groups (A to H), each of which contains 16 Master programs. Selecting a Master is done in basically the same
way as selecting Voices. To call up the desired Master program, select the appropriate Group and Number.
1 Master Program Number (Group/Number)
2 Master Program Name
3 Mode
4 Program Number (Group/Number)
5 Category <Sub Category>
6 Arpeggio Tempo
7 On/off status of the Insertion Effect/Chorus/Reverb/Master Effect/Master EQ
8 Part Number (Performance/Multi)
9 Voice Bank/Number/Voice Name of the current Part (Multi)
Storing the created Master
1 Press the [STORE] button to call up the Master Store display.
2 Set the destination for storing the Master.
Select a Master Number as destination by using the Data Dial, [DEC] and [INC] buttons. You can use the [A] – [H]
buttons and [1] – [16] buttons to select a Master number.
3 Press the [ENTER] button. (The display prompts you for confirmation.)
To cancel the Store operation, press the [EXIT] button.
4 Press the [ENTER] button to execute the Store operation.
After the Master has been stored, a “Completed” message appears and operation returns to the Master Play
display.
CAUTION
When you execute the Store operation, the settings for the destination memory will be overwritten. Important data should always
be saved to the internal flash memory or a USB storage device connected to the USB TO DEVICE terminal. For details on the
operation, refer to the Owner’s Manual.
Operation
Press the [MASTER] button