User Manual

ManualsBrandsYamaha ManualsSynthesizersS90XS/S70XS

111

112

113

114

115

116

117

118

119

120

Reference Manual

Reference

118

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Master

Play

Edit Select

Common Select

Name

Memory

Zone Sw

Zone Edit Select

Transmit

Note

Preset

Knob/Slider

Job Select

Bulk

Initialize

Appendix

Basic Structure

Zone Edit

Determines the parameters of the Zones.

From this display you can set how each Zone transmits MIDI messages when you play the keyboard.

Tx Ch (Transmit Channel)

Determines the MIDI Transmit Channel for each Zone.

Settings: 1 – 16

Int Sw (Internal Switch)

Determines whether or not MIDI data for each Zone is transmitted to the internal tone generator.

Settings: on (transmitted), off

NOTE: When the Local Control parameter is set to “off” on the MIDI display (page 137) in the Utility mode, MIDI data for each Zone will

not be transmitted to the internal tone generator, even if the Int Sw parameter is set to “on.”

Ext Sw (External Switch)

Determines whether or not MIDI data for each Zone is transmitted to an external MIDI device.

Settings: on (transmitted), off

Int Bank Sel (Internal Bank Select)

Ext Bank Sel (External Bank Select)

Int PC (Internal Program Change)

Ext PC (External Program Change)

From this display, you can determine whether or not MIDI messages controlling Voice selection for each Zone are

transmitted to the internal/external tone generator.

Settings: on, off, ---

NOTE: When the “Ins Sw”/”Ext Sw” is set to “off,” none of these parameters is available.

Vol/Express (Volume/Expression)

Pan

From this display, you can determine whether or not MIDI messages controlling non-Voice-related settings such as

Control Change, Pitch Bend and Channel Aftertouch are transmitted to the internal/external tone generator. When you

wish to transmit a certain MIDI message from a certain Zone to the internal/external tone generator, checkmark the

corresponding box.

Settings: on, off, ---

NOTE: When the “Ins Sw”/”Ext Sw” is set to “off,” each parameter is not available.

Operation

[MASTER]  Select Master program  [EDIT]  Select the “Zone1 – 4” in the

Master Edit Select display  [ENTER]  Master Zone Edit Select display

1 Transmit

Pitch Bend

After Touch (Channel After Touch)

Modulation

Foot Ctrl 1, 2 (Foot Controller 1, 2)

Sustain (Sustain Pedal)

Foot Switch

Knob

Slider

A. Func 1, 2 (Assignable Function 1, 2)