User Manual

Reference Manual
Reference
142
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Utility
Utility Select
General
Layer/Split/
Drum Assign
MIDI
Controller
Micro Tune
Voice Select
Arpeggio
A/D Out
A/D FX
Master FX
Master EQ
Remote
Quick Set
Panel Lock
Fctry Set
Basic Structure
Appendix
Output Select
Determines the output destination.
Settings: See below.
NOTE When the Output Select is set the value other than “L&R,” the Reverb/Chorus Send is automatically fixed to 0 and the
Dry Level is automatically fixed to 127.
Ins A (Insertion A)
Ins B (Insertion B)
When the cursor is located here, pressing the [ENTER] button calls up the Insertion Effect Parameter display.
Effect Parameters
Switch
This parameter is available only for the Master Effect and cannot be edited here.
Category
Type
From the Category column, you can select one of the Effect Categories, each of which contains similar Effect types. From the Type
column, you can select one of the Effect Types listed in the selected Category.
Settings: Details about the Effect categories and the Effect types are described on page 16.
Preset
This lets you call up pre-programmed settings for each Effect type, designed to be used for specific applications and situations.
You can change how the sound is affected by the selected pre-programmed settings.
NOTE: For details about the preset settings of each effect type, refer to the Data List (separate PDF documentation).
Effect Parameter 1 – 16
The effect parameter differs depending on the currently selected effect type. For details about the Effect parameters, refer to page 19.
For a complete list of the available Effect parameters for each Effect type, refer to the Effect Type List in the Data List (separate PDF
documentation).
Determines Master Effect parameters in the Voice mode. The settings here affect all Voices.
Switch
Determines whether the Master Effect is applied to the Voice or not. When this is set to “on,” the Master Effect will be
applied.
Settings: off, on
Category
Type
From the Category column, you can select one of the Effect Categories, each of which contains similar Effect types.
From the Type column, you can select one of the Effect Types listed in the selected Category.
Settings: Details about the Effect categories and the Effect types are described on page 16.
Preset
This lets you call up pre-programmed settings for each Effect type, designed to be used for specific applications and
situations. You can change how the sound is affected by the selected pre-programmed settings.
NOTE:
For details about the preset settings of each effect type, refer to the Data List (separate PDF documentation).
Effect Parameter 1 – 16
The effect parameter differs depending on the currently selected effect type. For details about the Effect parameters,
refer to page 19. For a complete list of the available Effect parameters for each Effect type, refer to the Effect Type List in
the Data List (separate PDF documentation).
Display indication Output destination Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
asL ASSIGNABLE OUTPUT L Mono
asR ASSIGNABLE OUTPUT R Mono
vocoder Insertion Effect of the Voice ----
Master FX (Voice Master Effect)