User Manual

Reference Manual
Reference
143
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Utility
Utility Select
General
Layer/Split/
Drum Assign
MIDI
Controller
Micro Tune
Voice Select
Arpeggio
A/D Out
A/D FX
Master FX
Master EQ
Remote
Quick Set
Panel Lock
Fctry Set
Basic Structure
Appendix
This display lets you set Master EQ parameters in the Voice mode, allowing you to control EQ over five independent
frequency bands. The settings here affect all Voices.
The parameters are the same as those in the Master EQ display in Multi Common Edit (page 97).
Lets you the set the Remote parameters. You can directly call up the
Remote display by pressing the [DAW REMOTE] button on the panel to
enter the Remote mode then pressing the [UTILITY] button.
DAW Select
Determines the DAW application software to be controlled from the panel
operation of this instrument.
Settings: Cubase, LogicPro, DigiPerf, SONAR
NOTE: When the [DAW REMOTE] lamp is turned on, simply selecting a DAW type calls up the Remote settings automatically.
Knb/Sldr Disp Time (Knob/Slider Display Time)
Determines whether or not operating one of the Knobs or Sliders will cause the Knob popup or Slider popup to appear.
Settings: off, 1 sec, 1.5 sec, 2 sec, 3 sec, 4 sec, 5 sec, keep
Knob Curve
Adjusts the touch response sensitivity in five steps. Larger values provide higher sensitivity, letting you make large
changes to the value with just a little turning of the Knob.
Settings: 1 – 5
NOTE: The parameters here can be set also in the General display of Utility.
Slider Mode
Determines how the parameter value is affected when you operate the Slider.
Settings: catch, jump
Prog Change Mode (Program Change Mode)
Determines what messages will be transmitted to the computer when you operate the [DEC]/[INC] buttons or data dial.
When “PC” is selected, Program Change messages will be transmitted via MIDI Port 1. When “remote” is selected,
Remote Control messages will be transmitted via MIDI Port 2. When “PC+remote” is selected, both types of messages
will be transmitted via MIDI Ports 1 and 2.
Settings: PC+remote, PC, remote
NOTE: This parameter is fixed to “PC” when the “DAW Select” is set to the value other than “Cubase.”
Velocity Meter
Determines whether or not the velocities generated by your keyboard performance will be indicated with the
Performance Control buttons. When set to “on,” the Performance Control buttons function as a velocity meter.
Settings: off, on
Master EQ (Voice Master EQ)
6 Remote
off When this selected, the popup is not called up even if you operate the Knobs and Sliders.
1 sec – 5 sec Operating the Knob and Slider will cause the popup to appear for 1 – 5 seconds, and then the display will automatically be closed.
keep Operating the Knob and Slider will cause the popup display to appear. When the popup display is open, calling up a different
display/dialog/popup or pressing the [ENTER] button/ [EXIT] button will cause it to close.
catch The Slider operation will not affect the value immediately while it will affect the value after the Slider position reaches the position
corresponding to the current value.
jump The Slider operation will change the value immediately from the current value to the new value corresponding to the Slider position.
Knob popup display Slider popup display