User Manual

Reference Manual
Appendix
159
Basic Structure
Functional Blocks
Tone Generator
A/D Input
Arpeggio
Sequencer
Audio Record/Play
Controller
Effect
Internal Memory
Reference
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Appendix
About MIDI
Display Messages
Troubleshooting
The S90 XS/S70 XS does not sound properly even when playing back the
song data on the computer or the MIDI instrument connected to the S90
XS/S70 XS
 Is the S90 XS/S70 XS set to the Multi mode?
Select the Multi mode to play multiple channels simultaneously.
MIDI bulk data transmission/reception does not work properly
 Is the Receive Bulk parameter set to off?
Set the Receive Bulk parameter to on.
[UTILITY]  [MIDI]  Receive Bulk (page 138)
 If the data was saved with the Bulk Dump function of the S90 XS/S70 XS, you need to
set the Device Number to the same number before Bulk Dump transmission.
[UTILITY]  [MIDI]  Device No. (page 138)
 When transmission does not work properly, is the device number of the MIDI
instrument connected to the S90 XS/S70 XS set to match the Device Number Parameter
in the Utility mode?
[UTILITY]  [MIDI]  Device No. (page 138)
Cannot save data to the external USB storage device
 Is the USB storage device being used write protected? (Write-protect should be set to
off for saving data.)
 Is the USB storage device being used properly formatted?
[FILE]  Save  Selecting USB storage device  [JOB]  FORMAT (page 130)
Cannot play an audio file
 Is the format of the audio file correct?
The S90 XS/S70 XS can play only stereo WAVE (.wave)/IFF (.aif) files at 44.1kHz/16-bit.
Cannot enter the Edit mode
 Is the S90 XS/S70 XS in the File mode?
After exiting from the File mode, press the [EDIT] button.