User Manual

Reference Manual
Reference
29
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Voice
Play
Normal Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Controller
LFO
Filter/EG
3 Band EQ
Effect
Element Edit
OSC
Tune
PEG
Filter Type
FEG
Filter Scale
AMP Level/Pan
AEG
AMP Scale
LFO
EQ
Drum Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ
Effect
Key Edit
OSC
Tune
Filter Type
AMP Level/Pan
AEG
EQ
Job
Recall
Bulk
Supplementary Info.
Basic Structure
Appendix
1 Press the [FAVORITE] button in the Voice Play mode.
The list of Voices registered to the Favorite Category will be shown.
2 Select a Voice via the Cursor [U]/[D] buttons, [DEC]/[INC] buttons, or Data Dial.
3 Press the [ENTER] button to actually call up the Voice.
Using Knobs and Sliders
These let you adjust a variety of parameters for the current Voice, such as effect depth, attack/release characteristics,
tonal color, and others. Five functions can be assigned to each knob, alternatively selected via the Knob Function
buttons. Each time the button is pressed, the lamp lights alternatively in descending order, TONE | EG | EQ | EFFECT |
MIC.
Selecting a Voice from the Favorite Category
Functions assigned to Knobs
When the TONE lamp is turned on:
Knob 1 CUTOFF Raises or lowers the Filter Cutoff Frequency to adjust the tone brilliance.
Knob 2 RESONANCE Raises or lowers the Resonance to boost the level of the signal in the area of the cutoff frequency. By
emphasizing the overtones in this area, this can produce a distinctive “peaky” tone, making the sound
brighter and harder.
Knob 3 ASSIGN 1 A variety of functions can be assigned to these Knobs. To check which functions are currently assigned
to the Knobs, call up the Knob Popup display by operating the Knob. The Controller display in the Voice
Common Edit mode lets you assign the functions to these Knobs.
Knob 4 ASSIGN 2
When the EG lamp is turned on:
Knob 1 ATTACK Increases or decreases the EG Attack Time of the current Voice. The smaller the value, the faster the
attack.
Knob DECAY (Decay Time) Increases or decreases the AEG Decay Time of the current Voice, controlling how fast the volume falls
from maximum attack level to the sustain level. The smaller the value, the faster the decay.
Knob 3 SUSTAIN Increases or decreases the EG Sustain Level at which the volume will continue while a key is held, after
the initial attack and decay. Turn the knob counter-clockwise to make the sound cut off more sharply
after the decay.
Knob 4 RELEASE Increases or decreases the EG Release Time of the sound to determine how fast the volume falls from
the sustain level to zero when a key is released. The lower the value, the faster the release.
When the EQ lamp is turned on:
Knob 1 LOW (Low Gain) Increases or decreases the EQ Low Gain to change the sound.
Knob 2 MID F (Middle Frequency) Increases or decreases the EQ Middle Frequency around which the band is adjusted via Knob 3 (MID).
Knob 3 MID (Middle Gain) Increases or decreases the EQ Middle Gain to change the sound.
Knob 4 HIGH (High Gain) Increases or decreases the EQ High Gain to change the sound.
When the EFFECT lamp is turned on:
Knob 1 CHO PRESET (Chorus Preset) Switches the Chorus preset. Changing the preset allows you to simultaneously set a variety of important
related parameters.
Knob 2 CHO RETURN (Chorus Return) Adjusts the Chorus Return Level
Knob 3 REV PRESET (Reverb Preset) Switches the Reverb Preset. Changing the preset allows you to simultaneously set a variety of important
related parameters.
Knob 4 REV RETURN (Reverb Return) Adjusts the Reverb Return Level
When the MIC lamp is turned on:
Knob 1 VOLUME Adjusts the volume of the signals that are input from the rear panel MIC INPUT jack
Knob 2 PAN Adjusts the panning of the signals that are input from the rear panel MIC INPUT jack
Knob 3 CHO SEND (Chorus Send) Adjusts the Chorus Send Level
Knob 4 REV SEND (Reverb Send) Adjusts the Reverb Send Level
Knob Function buttons
Functions assigned to
Knob 1 – 4
Current values of
the functions
Unedited value (previously saved)