User Manual

Reference Manual
Reference
34
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Voice
Play
Normal Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Controller
LFO
Filter/EG
3 Band EQ
Effect
Element Edit
OSC
Tune
PEG
Filter Type
FEG
Filter Scale
AMP Level/Pan
AEG
AMP Scale
LFO
EQ
Drum Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ
Effect
Key Edit
OSC
Tune
Filter Type
AMP Level/Pan
AEG
EQ
Job
Recall
Bulk
Supplementary Info.
Basic Structure
Appendix
Normal Voice Edit
A Normal Voice, which contains pitched musical instrument-type sounds that can be played over the range of the
keyboard, can consist of up to eight Elements. There are two types of Normal Voice Edit displays: those for Common
Edit to edit the settings common to all Elements, and those for Element Edit to edit individual Elements.
In this section, we’ll cover the Normal Voice parameters.
Common Edit
These parameters are for making global (or common) edits to all four Elements of the selected Normal Voice.
Name
Enters the desired name for the Voice. When you move the cursor to “Name,” pressing the [ENTER] button calls up the
Naming dialog, allowing you to enter the desired name. The Voice name can contain up to 20 characters. For detailed
instructions on inputting a character, refer to the S90 XS/S70 XS Owner’s Manual.
Main Ctgry (Main Category)
Sub Ctgry (Sub Category)
Determines the Main Category and Sub Category of the Voice.
“Category” can be used as a keyword representing the characteristic of the Voice. The appropriate setting makes it
easy to find the desired Voice from a variety of Voices.
There are 17 Main Categories which indicate types of instruments. There are up to six Sub Categories for each Main
Category, indicating more detailed types of instruments.
Settings: Refer to the Voice Category List on page 64.
Volume
Determines the output level of the Voice. Set this parameter to adjust the balance between the current Voice and other
Voices. This parameter can be changed via the Slider directly.
Settings: 0 – 127
Pan
Determines the stereo pan position of the Voice. This parameter can be changed via the Slider directly.
Settings: L63 (far left) – C (center) – R63 (far right)
NOTE: Note that this Voice Pan parameter may have little or no audible effect if the Pan for a specific element is set to the left position
and the Pan for another element is set to the right position.
Note Shift
Determines the transpose setting for the amount (in semitones) by which the pitch is raised or lowered.
Settings: -24 – +0 – +24
Operation
[VOICE]  Select Normal Voice  [EDIT]  Select the desired display in the
Voice Edit Select display  [ENTER]  Edit display
1 Name
2 Play Mode
1
2
8
5
4
7
3
6
Voice Edit Select display
(Normal Voice)
Edit display
(example: Name display)