User Manual

Reference Manual
Reference
67
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Voice
Play
Normal Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Controller
LFO
Filter/EG
3 Band EQ
Effect
Element Edit
OSC
Tune
PEG
Filter Type
FEG
Filter Scale
AMP Level/Pan
AEG
AMP Scale
LFO
EQ
Drum Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ
Effect
Key Edit
OSC
Tune
Filter Type
AMP Level/Pan
AEG
EQ
Job
Recall
Bulk
Supplementary Info.
Basic Structure
Appendix
 Combination Type Filter
This type is a combination of two different filter types. You can edit the distance between the two Cutoff Frequencies.
LPF12+HPF12
A combination of a -12 dB/oct low-pass filter and high-pass filter. When this Filter Type is selected, HPF Cutoff and HPF Key Follow can
be set. Only the LPF graph is shown on the display.
LPF6+HPF6
A combination of a -6 dB/oct low-pass filter and high-pass filter. When this Filter Type is selected, HPF Cutoff and HPF Key Follow can be
set. Only the LPF graph is shown on the display.
LPF12+BPF6
A combination of a low-pass filter and band-pass filter. You
can edit the distance between the two Cutoff Frequencies.
Setting example of Filter Scaling
Here we’ll show you the setting example of Filter Scaling in Filter Scale (page 53) of the Voice Element Edit parameters.
For the settings shown in the example below, the basic Cutoff frequency value is 127, and the various Cutoff Offset
values at the selected Break Point settings change that basic value accordingly. The Cutoff frequency changes in a
linear fashion between successive Break Points as shown.
Setting example of Amplitude Scaling
Here we’ll show you an example Amplitude Scaling setting in AMP Scale (page 55) of the Voice Element Edit
parameters. For the settings shown in the example below, the basic Amplitude (volume) value for the selected Element
is 80, and the various Level Offset values at the selected Break Point settings change that basic value accordingly. The
Amplitude changes in a linear fashion between successive Break Points as shown.
1234
Break Point C#1 D#2 C3 C4
Cutoff Offset -4 +10 +17 +4
1234
Break Point C1C2C3C4
Level Offset -4 +10 +17 +4
Level
Distance
Only the lower cutoff frequency is set directly on the
window.
Cutoff Frequency Cutoff Frequency
Range passed
Cutoff range
Frequency
123
137
144
131
Cutoff
frequency
Note
Break
Point 1
C#1
Break
Point 2
D#2
Break
Point 3
C3
Break
Point 4
A4
76
90
97
84
Amplitude
Note
Break
Point 1
C1
Break
Point 2
C2
Break
Point 3
C3
Break
Point 4
C4