User Manual

Reference Manual
Reference
71
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Performance
Play
Mixing
Edit Select
Common Edit
Name
Play Mode
Arpeggio
Controller
Filter / EG
EQ
Effect
Parameter
A/D Out
A/D FX
Parameter
Part Edit
Voice
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Filter / EG
3 Band EQ
Rcv Sw
FX Send
Job Select
Recall
Bulk
Copy
Initialize
Supplementary Info.
Basic Structure
Appendix
Controlling the Volume, Pan, and Effect by using the Slider
The far left four sliders adjust the Volume, Pan, Chorus Send and Reverb Send for each of four Parts. You can change
the function by using the Slider Function buttons.
NOTE:
When the “Slider Mode” parameter is set to “catch” on the General display (page 135) of the Utility mode, if a mark appears,
moving the slider does not affect the sound. Once you move the Slider past this point, the mark disappears and moving the
Slider affects the sound.
The Performance Play display
You can call up the Performance Play display by pressing the
[PERFORM] button.
1 Performance Bank
2 Performance Number
Indicates the Bank and Number of the selected Performance.
A Bank is a memory location that includes data of 128 different
Performances. Four Banks (User 1 – 4) are provided.
Each Performance within a Bank is assigned to a Performance Number
of 001 to 128. This format corresponds to the [A] – [H] buttons and the
Number [1] – [16] buttons. The Performance Numbers and the
corresponding Group/Numbers are listed below.
3 Category (Main Category <Sub Category>)
Indicates the Category of the selected Performance. “Category,”
consisting of Main Category and Sub Category, is a keyword that
indicates the instrument characteristics or the type of sound. Each
Performance can be registered to a Main Category and its Sub
Category. The Category settings can be edited in the Name display
(page 73) of the Performance Common Edit mode.
4 Performance Name
Indicates the name of the current Performance.
5 Current Part
Indicates the selected Part.
6 Tempo
Indicates the tempo for the arpeggio.
7 On/Off Status of the Effects
Indicates the on/off status of the Effects in the current Performance.
The Edit (E) indicator
When changing the value of the parameter in the Performance Play or Edit mode, the Edit (E) Indicator will appear on
the top right corner of the LCD display. This gives a quick confirmation that the current Performance has been modified
but not yet stored. To store the current edited status, follow the instructions below.
Slider Function but-
ton
Mark (current value)
Performance
number
Group/Number
001 – 016 A01 – 16
017 – 032 B01 – 16
033 – 048 C01 – 16
049 – 064 D01 – 16
065 – 080 E01 – 16
081 – 096 F01 – 16
097 – 112 G01 – 16
113 – 128 H01 – 16